This page is for the configuration of the blade servers.
The server is a HP/Compaq blade chassis with 5 BL10e blades. Thanks to HP NewZealand for sponsoring this machine!
Extra blades were later donated by The Total Team http://www.totalteam.co.nz/ via CraigFalconer.
The blades all run Debian GNU/Linux 4.0 (Etch). Read about the set up at WlugAdmin. The server was configured and is maintained by the WlugSysadmins.
Orcon Internet - please support our sponsors!
There are 5 blades:
The blades have 2 interfaces, eth0 will have their realworld IP and network, eth1 will have a private network between all the blades using 10.100.100.0/24.
Orcon have allocated 60.234.66.112/28 for WLUG's use, .113 is the gateway
# | Name | RW IP | FireWall | Root password | Private IP | NTP | Serial Console | Compaq Tools | Notes |
1 | hoiho | 60.234.66.114 | Done | Set | 10.100.100.5 | Syncs to db | OK | disk errors | |
2 | 60.234.66.115 | Done | Set | 10.100.100.4 | Syncs to db | OK | |||
3 | www1 | 60.234.66.116 | Done | Set | 10.100.100.2 | Syncs to db | OK | ||
4 | www2 | 60.234.66.117 | Done | Set | 10.100.100.3 | Syncs to db | OK | disk errors | |
5 | db | 60.234.66.118 | Done | Set | 10.100.100.1 | Syncs to nz.pool.ntp.org | OK | ||
6 | runs ubuntu, not configured | ||||||||
7 | runs ubuntu, not configured | ||||||||
8 | runs etch, new hdd, no network connectivity |
New SSL Cert