Differences between version 6 and revision by previous author of M11.
Other diffs: Previous Major Revision, Previous Revision, or view the Annotated Edit History
| Newer page: | version 6 | Last edited on Thursday, September 30, 2004 3:32:07 pm | by JohnMcPherson | Revert |
| Older page: | version 4 | Last edited on Tuesday, July 15, 2003 5:08:06 pm | by GerwinVanDeSteeg | Revert |
@@ -1,16 +1,29 @@
-These notes
are based on my observations with an M11
, but I assume the others are similar
.
+There
are lots of these [ADSL] modem/routers around
, as [TelecomNZ] used to rent them out when ADSL was first available here
.
-There are lots of these modem/routers around, as [TelecomNZ] used to rent them out when
ADSL was first available here
.
+From the internal log:
+ 00:00:00:00 L4 GDB: PowerPC gdbnub debugger is not installed
+ 00:00:00:00 L4 BR: Nokia M11 multiport
ADSL router / bridge
+ 00:00:00:00 L4 BR: Nokia software version 5
.4.5 (build R2)
+ 00:00:00:00 L4 BR: ADSL Router (M11, rev 1)
+ 00:00:00:00 L4 BR: last install status: code flash successfully programmed
+ 00:00:00:00 L4 BR: memory sizes - 1856K Flash, 4096K RAM
+ 00:00:00:00 L4 BR: free memory: 2519262 bytes, starting at 0x194f12
-They support pinholing
.
+So they are [PowerPC] based ([CPU] = MPC860SAR), and can use [GDB]? Interesting...
+
+
They support PinHoling
.
Useful tips:
* they run a telnet server, and optionally a HTTP server, for configuration
-* The password is "Telecom". Username can be anything.
+* The default user-admin
password is "Telecom". Username can be anything.
+* The default admin password is "Zba2Y7Pr3"
.
* The password is stored in plain text
* useful console commands:
status
show help (all commands for displaying info)
+** show ppp (shows all ppp statistics, bytes in and bytes out. If the router stays up long enough, it will overflow and report negative 2 billion bytes sent/received)
+** show ppp lastconnect (shows [LCP] debugging info and [PPP] info like [MRU], and assigned [IP] address and [DNS] servers)
+** show status (shows firmware version, log message count, uptime)
configure (to change settings)
* Put telnet on port 1, HTTP on port 2, and forward all the other ports to your Linux machine.
-* The nokia / Telecom logo on the front is actually on a panel that you can open to find a serial port. However, it is an RJ-45 so you will need to find an appropriate
cable.
+* The nokia / Telecom logo on the front is actually on a panel that you can open to find a serial port. However, it is an RJ-45 so you will need to find an appropriately wired
cable.
