version 7, including all changes.
.
Rev |
Author |
# |
Line |
5 |
JohnMcPherson |
1 |
There are lots of these [ADSL] modem/routers around, as [TelecomNZ] used to rent them out when ADSL was first available here. |
2 |
CraigBox |
2 |
|
5 |
JohnMcPherson |
3 |
From the internal log: |
|
|
4 |
00:00:00:00 L4 GDB: PowerPC gdbnub debugger is not installed |
|
|
5 |
00:00:00:00 L4 BR: Nokia M11 multiport ADSL router / bridge |
|
|
6 |
00:00:00:00 L4 BR: Nokia software version 5.4.5 (build R2) |
|
|
7 |
00:00:00:00 L4 BR: ADSL Router (M11, rev 1) |
|
|
8 |
00:00:00:00 L4 BR: last install status: code flash successfully programmed |
|
|
9 |
00:00:00:00 L4 BR: memory sizes - 1856K Flash, 4096K RAM |
|
|
10 |
00:00:00:00 L4 BR: free memory: 2519262 bytes, starting at 0x194f12 |
2 |
CraigBox |
11 |
|
5 |
JohnMcPherson |
12 |
So they are [PowerPC] based ([CPU] = MPC860SAR), and can use [GDB]? Interesting... |
|
|
13 |
|
|
|
14 |
They support PinHoling. |
2 |
CraigBox |
15 |
|
|
|
16 |
Useful tips: |
|
|
17 |
* they run a telnet server, and optionally a HTTP server, for configuration |
6 |
JohnMcPherson |
18 |
* The default user-admin password is "Telecom". Username can be anything. |
|
|
19 |
* The default admin password is "Zba2Y7Pr3". |
4 |
GerwinVanDeSteeg |
20 |
* The password is stored in plain text |
2 |
CraigBox |
21 |
* useful console commands: |
|
|
22 |
status |
|
|
23 |
show help (all commands for displaying info) |
5 |
JohnMcPherson |
24 |
** show ppp (shows all ppp statistics, bytes in and bytes out. If the router stays up long enough, it will overflow and report negative 2 billion bytes sent/received) |
|
|
25 |
** show ppp lastconnect (shows [LCP] debugging info and [PPP] info like [MRU], and assigned [IP] address and [DNS] servers) |
|
|
26 |
** show status (shows firmware version, log message count, uptime) |
2 |
CraigBox |
27 |
configure (to change settings) |
|
|
28 |
* Put telnet on port 1, HTTP on port 2, and forward all the other ports to your Linux machine. |
5 |
JohnMcPherson |
29 |
* The nokia / Telecom logo on the front is actually on a panel that you can open to find a serial port. However, it is an RJ-45 so you will need to find an appropriately wired cable. |
7 |
CraigBox |
30 |
|
|
|
31 |
They were replaced by the [M1122]. |