Differences between current version and predecessor to the previous major change of HowToPostfixCyrusWebcyradmHOWTO.
Other diffs: Previous Revision, Previous Author, or view the Annotated Edit History
| Newer page: | version 6 | Last edited on Monday, November 1, 2004 11:40:00 pm | by AristotlePagaltzis | |
| Older page: | version 5 | Last edited on Wednesday, May 14, 2003 5:10:57 pm | by BobApthorpe | Revert |
@@ -1,697 +1 @@
-!!!Postfix-Cyrus-Web-cyradm-HOWTO
-----
-!Luc de Louw
-
-luc ''at'' delouw.ch
-
-__Revision History__
-
- Revision 1..02002-04-07
- Revised by: ldl
- Initial Release
-
-This document guides you through the installation of the Postfix mail transportation agent (MTA), the Cyrus IMAP server. The goal is a fully functional high-performance mailsystem with user-administration with Web-cyradm, a web interface. Data like virtualusers, aliases etc. are stored in a MySQL database.
-
-----
-
-; __Table of Contents__ :
-; 1. Introduction:
-; 1.1. Contributors and Contacts :
-; 1.2. Why I wrote this document :
-; 1.3. Copyright Information :
-; 1.4. Disclaimer :
-; 1.5. New Versions :
-; 1.6. Credits :
-; 1.7. Feedback :
-; 1.8. Translations :
-; 2. Technologies:
-; 2.1. The Postfix MTA :
-; 2.2. Cyrus IMAP :
-; 2.3. MySQL Database :
-; 2.4. pam_mysql :
-; 2.5. Web-cyradm Webinterface :
-; 3. Getting and installing the software:
-; 3.1. Getting and installing MySQL :
-; 3.2. Getting and installing Postfix :
-; 3.3. Getting and installing Cyrus IMAP :
-; 3.4. Getting and installing pam_mysql :
-; 3.5. Getting and installing Web-cyradm :
-; 4. Configuration:
-; 4.1. Configuring MySQL :
-; 4.2. Configuring PAM :
-; 4.3. Configuring Postfix :
-; 4.4. Configuring Cyrus IMAP :
-; 4.5. Configuring Web-cyradm :
-; 5. Testing the setup:
-; 5.1. (Re-)Starting the daemons :
-; 5.2. Testing Web-cyradm :
-; 5.3. Testing postfix :
-; 5.4. Testing the IMAP and POP functionality :
-; 6. Further Information:
-; 6.1. News groups :
-; 6.2. Mailing Lists :
-; 6.3. HOWTO :
-; 6.4. Local Resources :
-; 6.5. Web Sites :
-; 7. Questions and Answers :
-
-!!!1. Introduction
-----
-!!1.1. Contributors and Contacts
-
-First I would thank all those people who send questions and suggestions that made a further development of this document possible. It shows me, sharing knowledge is the right way. I would encourage you to send me more suggestion, just write me an email 'luc ''at'' delouw.ch'
-
-----
-!!1.2. Why I wrote this document
-
-There are different approaches howto set up different mailsystems. Most documents available are related to Sendmail, procmail, WU-IMAPd and friends. These fine-running software is unfortunately very un-flexible concerning user administration.
-
-For longer time I was testing alternative MTA's like qmail, postfix and exim, IMAP/POP-servers like Cyrus, vpopmail, Courier IMAP and others.
-
-At the end of the day, from my point of view the couple Postfix/Cyrus seems to be the most flexible and performant solution.
-
-All these combinations of software had one in common: there was only little documentation available concerning how this software is working together with each other. For installing the software, lot of effort must be spent to get all information needed to get all software running.
-
-----
-!!1.3. Copyright Information
-
-This document is copyrighted (c) 2002 Luc de Louw and is distributed under the terms of the Linux Documentation Project (LDP) license, stated below.
-
-Unless otherwise stated, Linux HOWTO documents are copyrighted by their respective authors. Linux HOWTO documents may be reproduced and distributed in whole or in part, in any medium physical or electronic, as long as this copyright notice is retained on all copies. Commercial redistribution is allowed and encouraged; however, the author would like to be notified of any such distributions.
-
-All translations, derivative works, or aggregate works incorporating any Linux HOWTO documents must be covered under this copyright notice. That is, you may not produce a derivative work from a HOWTO and impose additional restrictions on its distribution. Exceptions to these rules may be granted under certain conditions; please contact the Linux HOWTO coordinator at the address given below.
-
-In short, we wish to promote dissemination of this information through as many channels as possible. However, we do wish to retain copyright on the HOWTO documents, and would like to be notified of any plans to redistribute the HOWTOs.
-
-If you have any questions, please contact mailto:linux-howto@metalab.unc.edu
-
-----
-!!1.4. Disclaimer
-
-No liability for the contents of this documents can be accepted. Use the concepts, examples and other content at your own risk. As this is a new edition of this document, there may be errors and inaccuracies, that may of course be damaging to your system. Proceed with caution, and although this is highly unlikely, the author(s) do not take any responsibility for that.
-
-All copyrights are held by their by their respective owners, unless specifically noted otherwise. Use of a term in this document should not be regarded as affecting the validity of any trademark or service mark.
-
-Naming of particular products or brands should not be seen as endorsements.
-
-You are strongly recommended to take a backup of your system before major installation and to backup at regular intervals.
-
-----
-!!1.5. New Versions
-
-This is the initial release.
-
-New version of this document are announced on __freshmeat__ (http://freshmeat.net)
-
-The latest version of this document you can get from http://www.delouw.ch/linux
-
-* HTML.
-* Postscript (ISO A4 format).
-* Acrobat PDF.
-* SGML Source.
-* HTML gzipped tarball.
-
-----
-!!1.6. Credits
-
-I would thank to the nice people at 'discuss ''at'' linuxdoc.org' for
-supporting me in writing HOWTOs
-
-----
-!!1.7. Feedback
-
-Feedback is most certainly welcome for this document. Without your submissions and input, this document wouldn't exist. Please send your additions, comments and criticisms to the following email address : luc ''at'' delouw.ch.
-
-----
-!!1.8. Translations
-
-At the moment no translations are available. A german translation is planned and would be written by myself as soon as the document is valid.
-
-Translations to other languages are always welcome. If you translated this document, please let me know, so I can set a link here.
-
-----
-!!!2. Technologies
-!!2.1. The Postfix MTA
-
-Quoting www.postfix.org »Postfix attempts to be fast, easy to administer, and secure, while at the same time being sendmail compatible enough to not upset existing users. Thus, the outside has a sendmail-ish flavor, but the inside is completely different.«
-
-__Figure 1. Postfix - the big picture__
-
-Doesn't it look impressive? - It looks much more complicated as it is. Postfix is indeed nice to configure and handle
-
-Unlike sendmail, postfix is not one monolithic program, it is a compilation of small programs, each of it has a specialized function. At this place I don't what to go into details with program does what. If you are interested how Postfix is working, please see the documentation at http://www.postfix.org/docs.html
-
-In this document you will find the information what to put in the config files
-
-----
-!!2.2. Cyrus IMAP
-
-The Cyrus IMAP is developed and maintained by Carnegie Mellon University.
-
-Unlike the WU-IMAPd Cyrus is using its own method to store the users mail. The data is stored in a database, this makes Cyrus so performant. Especially with lots of users and/or lot of big emails, there is nothing such fast as the Cyrus IMAP-server.
-
-Another very important feature is, you don't need a local Un*x user for each account. All users are authenticated by the IMAP-Server. This makes it a great solution for really huge base of users.
-
-User administration is done by special IMAP-commands. This allows you to eighter use the commandline interface, or use one of the available Webinterfaces. This Method is much more secure than a Webinterface to /etc/passwd !
-
-Since CMU changed the license policy for Cyrus, this software is going to be used by much more users
-
-----
-!!2.3. MySQL Database
-
-MySQL is a very fast, powerful and very nice to handle Database.
-
-Since Cyrus can authenticate its users with pam, you can use pam_mysql as a connector to the Userdatebase stored in MySQL. This allows you to create a nice Webinterface for your users for changing passwords, define and delete aliases and more.
-
-----
-!!2.4. pam_mysql
-
-pam means "Pluggable authentication module" and was originally proposed by some people at Sun. In meantime a lot of modules have been developed. One of them is an interface to MySQL
-
-With pam_mysql you to store the users password in a mysql database. Further, Postfix is able to lookup aliases from a MySQL-table. At the end of the day, you have a base for all administrative tasks to be done by the Sysadmin.
-
-Further you will be able to delegate some tasks to Powerusers, ''e.g.'' creating Accounts for a particular Domain. Changing passwords and creating new aliases can be delegated to the user. At the end of the day you as a Sysadmin have the time to do some more productive tasks, or write a HOWTO for the Linux Documentation Project :-)
-
-----
-!!2.5. Web-cyradm Webinterface
-
-__Figure 2. Web-cyradm Domain administration__
-
-Web-cyradm is the Webinterface that allows you to perform the administrative tasks to your mailsystem. This Screenshot shows the domain-administration part of Web-cyradm.
-
-Web-cyradm is written in PHP, which is often installed on webservers. Time to set up Web-cyradm takes just a few minutes.
-
-At the time being, Web-cyradm does not support different roles for its users. So you cannot use it as a frontend for your Powerusers (Domainadmins) or endusers. This Part of Web-cyradm is being developed, and should be ready for distribution in a few weeks (approx. end of may 2002.)
-
-----
-!!!3. Getting and installing the software
-
-Most of the software is included in your Linux distribution. SuSE is shipping Cyrus as far as I know since 7.1 and Redhat at least since recent time.
-
-I suggest you to install Cyrus and SASL as binary from rpm. Postfix is needed to compile by yourself because the lack of MySQL support by the rpm's from the distributors.
-
-
-----
-!!3.1. Getting and installing MySQL
-!3.1.1. Download
-
-Origin-Site: http://www.mysql.com/downloads/
-
-----
-!3.1.2. Building and installing
-
- cd /usr/local
- tar -xvzf mysql-3.23.49a.tar.gz
- cd mysql-3.23.49a
- ./configure \
- --prefix=/usr/local/mysql \
- --enable-assembler \
- --with-innodb
- make
- make install
- /usr/local/mysql/bin/mysql_install_db
- echo /usr/local/mysql/lib/mysql bb /etc/ld.so.conf
- ldconfig
-
-For security-improvement add a mysql-user on your system i.e. "mysql", then
-
- chown -R mysql /usr/local/mysql/var
-
-and change the line __user=root__ to __user=mysql__ in the file /usr/local/mysql/bin/safe_mysqld
-
-You may wish to start mysql automatically at boottime, copy /usr/local/mysql/share/mysql/mysql.server to /etc/init.d/ for SuSE and Redhat. Further you need to add Symlinks to /etc/init.d/rc3.d for SuSE and /etc/rc.d/rc3.d
-
-The following example is for SuSE Linux and should be easily changed for Redhat and other Linux distributions and commercial Unixes.
-
- cp /usr/local/mysql/share/mysql/mysql.server /etc/init.d/
- ln -s /etc/init.d/mysql.server /etc/init.d/rc3.d/S20mysql
- ln -s /etc/init.d/mysql.server /etc/init.d/rc3.d/k08mysql
-
-----
-!!3.2. Getting and installing Postfix
-!3.2.1. Download
-
-Origin-Site: http://www.postfix.org/ftp-sites.html
-
-----
-!3.2.2. Creating a User-ID (UID) and Group-ID (GID) for postfix
-
-Before you can build and install postfix you have to be sure a »postfix« and a »postdrop« groups and users exists on the System. First check for the groups. You can check this by __grep postfix /etc/group__ and __grep maildrop /etc/group__
-
-If there are no such groups and users, you just create them. Search for a free nummeric UID and GID. In the
-following example I will use UID and GID 33333 for Postfix and 33335 for the maildrop UID and GID. This ID's
-are corresponding to other documents.
-
- groupadd -g 33333 postfix
- groupadd -g 33335 maildrop
- useradd -u 33333 -g 33333 -d /dev/null -s /bin/false postfix
- useradd -u 33335 -g 33335 -d /dev/null -s /bin/false maildrop
-
-----
-!3.2.3. Building and installing
-
-The following screen shows what you have to do, if you installed MySQL from source as described above. If you installed MySQL from a binary package such as rpm or deb, then you have to change the include and library-flags to -I/usr/include/mysql and -L/usr/lib/mysql.
-
- tar -xvzf postfix-1.1.7.tar.gz
- cd postfix-1.1.7
- make -f Makefile.init makefiles \
- 'CCARGS=-DHAS_MYSQL -I/usr/local/mysql/include' \
- 'AUXLIBS=-L/usr/local/mysql/lib -lmysqlclient -lz -lm'
- make install
-
-During __make install__ a few question are asked. Just pressing __Enter__ should
-match your needs. For Redhat users it could be useful to enter /usr/local/share/man
-
-----
-!!3.3. Getting and installing Cyrus IMAP
-!3.3.1. Download and installing
-
-Like mentioned above, SuSE and Redhat are shipping Cyrus in their distributions. Just use
-YaST or the corresponding tool in Redhat.
-
-* cyrus-imapd-devel-2..16-115
-* cyrus-sasl-1.5.24-157
-* cyrus-sasl-gssapi-1.5.24-157
-* cyrus-sasl-devel-1.5.24-157
-* perl-Cyrus-IMAP-2..16-115
-* perl-Cyrus-SIEVE-acap-2..16-115
-* perl-Cyrus-SIEVE-managesieve-2..16-115
-* cyrus-imapd-2..16-115
-
-If you like, you can install it also on the commandline using:
-
- rpm -ihv (package-name).rpm
-
-Be sure to use only the lastest available version, so check out the downloads-site of your distribution
-
-----
-!!3.4. Getting and installing pam_mysql
-!3.4.1. Download
-
-Origin-Site: http://sourceforge.net/projects/pam-mysql/
-
-
-----
-!3.4.2. Installing
-
- tar -xvzf pam_mysql-.4.7.tar.gz
- cd pam_mysql
- make
- cp pam_mysql.so /lib/security
-
-----
-!!3.5. Getting and installing Web-cyradm
-!3.5.1. Download
-
-Origin-Site: http://www.delouw.ch/linux/web-cyradm
-
-----
-!3.5.2. Installing
-
-Web-cyradm is written in PHP. If you don't have a webserver with php installed, I like to refer to my Apache-Compile-HOWTO. That document describes how to set up Apache with PHP and other modules
-
-
- cd /usr/local/apache/htdocs
- tar -xvzf web-cyradm-latest.tar.gz
-
-After unpacking web-cyradm move it to a place in your webservers !DocumentRoot
-
-This is all, now we need to configure the whole bunch of software
-
-----
-!!!4. Configuration
-!!4.1. Configuring MySQL
-!4.1.1. Securing MySQL
-
-Because you are using MySQL to authenticate users, you need to restrict network access to Port 3306.
-
-I suggest to just bind mysql to the loopback-interface 127...1. This makes sure nobody can connect to your MySQL-Daemon via the network.
-
-Edit /etc/init.d/mysql.server and edit line 107 as following:
-
-Original line:
-
- $bindir/safe_mysqld --datadir=$datadir --pid-file=$pid_file
-
-Changed line:
-
- $ bindir/safe_mysqld --datadir=$datadir --pid-file=$pid_file \
- --bind-address=127...1
-
-(Re-)start your MySQL-Daemon by issuing __/etc/init.d/mysql.server start__
-
-To ensure the configuration-change was successful issue: __netstat -an|grep LISTEN__ or __netstat -ntl__. The output should be looking similar to this:
-
- bond:~ # __netstat -an|grep LISTEN__
- tcp 0 0 127...1:3306 ...:* LISTEN
-
-----
-!4.1.2. Create the databases and tables
-
-Now we need to create the database and tables for postfix and web-cyradm and add a user to the database
-
-Web-cyradm comes with two SQL-files: insertuser.sql and create.sql The first inserts the Database user to the database »mysql«, the second creates the database »mail« and the needed tables.
-
-The password for the user "mail" in this example is "secret" please insert whatever user and password you like.
-
-First you must add the user by executing __/usr/local/mysql/bin/mysql insertuser.sql__ After the new DB-user is successfully added, you need to reload mysql with __mysqladmin reload__
-
-To create the needed tables in the database:
-
- /usr/local/mysql/bin/mysql mail -u mail -p ` \
- /usr/local/apache/htdocs/web-cyradm/create.sql
-
-Now lets populate our tables, and insert the first admin-user. This user is needed to login to Web-cyradm
-
-Execute __/usr/local/mysql/bin/mysql mail -p__ And type the following SQL query:
-
- insert into adminuser (username, password) values ('admin', 'test');
-
-Please note, this setup for web-cyradm is fully compatible with replex, another project. Please see http://www.replex.org for more details.
-
-----
-!!4.2. Configuring PAM
-
-Now we need to get sure that PAM knows how to authenticate the Cyrus users
-
-You have to create the file /etc/pam.d/imap with the following entries:
-
- auth sufficient pam_mysql.so user=mail passwd=secret host=localhost db=mailadmin table=accountuser usercolumn=username passwdcolumn=password crypt=
- auth sufficient pam_unix_auth.so
- account required pam_mysql.so user=mail passwd=secret host=localhost db=mail table=accountuser usercolumn=username passwdcolumn=password crypt=
- account sufficient pam_unix_acct.so
-
-The lines containing pam_unix_auth.so and pam_unix_acct.so are only needed if you are migrating from wu-IMAP to cyrus. This way the users can be authenticate with its old unix-password and its new mysql-based password
-
-If you will use Cyrus also for POP-Service just __cp /etc/pam.d/imap /etc/pam.d/pop__
-
-----
-
-!!4.3. Configuring Postfix
-
-Postfix needs two major config files: main.cf and master.cf. Both now need our attention.
-
-----
-!4.3.1. master.cf
-
-You need to change just one line:
-
-old:
-
- argv=/cyrus/bin/deliver
-
-new:
-
- argv=/usr/cyrus/bin/deliver
-
-----
-
-!4.3.2. main.cf
-
-Here you need to change some more things like hostname, relaying, alias-lookups ''etc.''
-
-First change hostname:
-
- myhostname = foo.bar.org
-
-!! mydestination
-
-Here you have to put all domainnames that are local (corresponding to sendmail's /etc/mail/sendmail.cw) If you have multiple domains separate them with commas:
-
- mydestination = foo.bar.org, example.com, furchbar-grausam.ch, whatever.domain.tld
-
-!! relayhost
-
-Here you define where to deliver outgoing mails. If you do not provide any host. mails are delivered directly to the destination smtp host. Usually your relayhosts are your providers smtp-server
-
- relayhost = relay01.foobar.net relay02.foobar.net relay03.foobar.net
-
-!! mailtransport
-
-Here you define how the mails accepted for local delivery should be handled. In our situation mails should be delivered by the cyrus delivery-program
-
- mailbox_transport = cyrus
-
-At the end of file you need to add:
-
- virtual_maps = hash:/etc/postfix/virtual, mysql:/etc/postfix/mysql-virtual.cf
-
-Outgoing addresses should be rewritten from ''i.e'' test0002@domain to user.name@virtualhost.com. This is important if you like to use a webmail interface.
-
- sender_canonical_maps = mysql:/etc/postfix/mysql-canonical.cf
-
-Now you need to create the file /etc/postfix/mysql-virtual.cf:
-
- #
- # mysql config file for alias lookups on postfix
- # comments are ok.
- #
- # the user name and password to log into the mysql server
- hosts = localhost
- user = mail
- password = secret
- # the database name on the servers
- dbname = mailadmin
- # the table name
- table = virtual
- #
- select_field = dest
- where_field = alias
- additional_conditions = and status = '1'
-
-And the file /etc/postfix/mysql-canonical.cf:
-
- # mysql config file for canonical lookups on postfix
- # comments are ok.
- #
- # the user name and password to log into the mysql server
- hosts = localhost
- user = mail
- password = secret
- # the database name on the servers
- dbname = mail
- # the table name
- table = virtual
- #
- select_field = alias
- where_field = username
- # Return the first match only
- additional_conditions = and status = '1' limit 1
-
-----
-
-!!4.4. Configuring Cyrus IMAP
-
-There is only little changes needed. Edit /etc/imapd.conf and take care that the following entry is done
-
- sasl_pwcheck_method: pam
-
-This tells the Cyrus IMAP to authenticate using PAM
-
-If you want to enable Cyrus' TLS/SSL facilities you have to create a certificate first. This requires an OpenSSL installation:
-
- openssl req -new -nodes -out req.pem -keyout key.pem
- openssl rsa -in key.pem -out new.key.pem
- openssl x509 -in req.pem -out ca-cert -req -signkey new.key.pem -days 999
- cp new.key.pem /var/imap/server.pem
- echo tls_cert_file: /var/imap/server.pem bb /etc/imapd.conf
- echo tls_key_file: /var/imap/server.pem bb /etc/imapd.conf
-
-If you like to use sieve (A Mail Filtering Language), you must change an entry in /etc/services. Add or change the following line:
-
- sieve 2000/tcp
-
-----
-!!4.5. Configuring Web-cyradm
-
-You just need to do some changes in /usr/local/apache/htdocs/web-cyradm/config.inc.php
-
- cp config.inc.php-dist config.inc.php
-
-Edit the file and change the password and databasename to the appropriate values
-
-----
-!!!5. Testing the setup----
-!!5.1. (Re-)Starting the daemons
-
-Now all the software has been installed and configured, let's run some tests now. First you have to (re-)start all the daemons affected
-
-* __/etc/init.d/postfix start__
-* __/etc/init.d/cyrus start__
-* __/etc/init.d/mysql.server start__
-* __/usr/local/apache/bin/apachectl startssl__
-
-Hopefully all daemons started without any complaints...
-
-Now you can verify if the daemons are running properly by issuing __netstat -an|grep LISTEN__ or __netstat -ntl__
-
-The output should look similar like that:
-
- bond:~ # __netstat -an|grep LISTEN__
- tcp 0 0 ...:993 ...:* LISTEN
- tcp 0 0 ...:995 ...:* LISTEN
- tcp 0 0 127...1:3306 ...:* LISTEN
- tcp 0 0 ...:110 ...:* LISTEN
- tcp 0 0 ...:143 ...:* LISTEN
- tcp 0 0 ...:2000 ...:* LISTEN
- tcp 0 0 ...:80 ...:* LISTEN
- tcp 0 0 ...:25 ...:* LISTEN
- tcp 0 0 ...:443 ...:* LISTEN
-
-The port are assigned like this:
-
-* 993 imap-ssl
-* 995 pop3-ssl
-* 3306 mysql
-* 110 pop3
-* 143 imap
-* 2000 sieve
-* 80 http
-* 25 smtp
-* 443 https
-
-----
-
-!!5.2. Testing Web-cyradm
-
-Now you should be able to connect to http://localhost/mailadmin/ Login with the credentials defined before.
-
-Define a domain name and some accounts. Be sure the domain name belongs to your server. If not, you have to fake it by adding the domain to /etc/hosts. The Domain must also be defined as local in /etc/postfix/main.cf (mydestination = domain)
-
-----
-!!5.3. Testing postfix
-
-Now we are going to write a mail:
-
- $ __telnet localhost 25__
- Trying ::1...
- Trying 127...1...
- Connected to localhost.
- Escape character is '^]'.
- 220 mail ESMTP Postfix
- __helo localhost__
- 250 mail
- __mail from: luc@delouw.ch__
- 250 Ok
- __rcpt to: rcpt to: luc@localhost__
- 250 Ok
- __data__
- 354 End data with `CRb`LFb.`CRb`LFb
- __some text__
- __.__
- 250 Ok: queued as B58E141D33
- __quit__
-
-If you see such a message, then all seems to work fine. Be sure to specify a recipients address you previously defined in the web-cyradm database
-
-If you get an error like this:
-
- rcpt to: luc@localhost
- 451 `luc@localhost`: Temporary lookup failure
-
-Then either MySQL is not running, DB permissions are not set properly or you misconfigured /etc/postfix/main.cf
-
-On any errors, I suggest to examine /var/log/mail. Often you will find some hints as to what went wrong.
-
-----
-!!5.4. Testing the IMAP and POP functionality
-
-To make that kind of tests. you just need a mailclient like KMail or Netscape (Yes of course M$-Products are working as well) but in this example I'll using KMail
-
-__Figure 3. Creating a new account__
-
-If you enabled TLS/SSL, you may wish to test also the following:
-
-__Figure 4. Testing TLS/SSL functionality__
-
-If login fails, and you are sure, you typed the right password, take care that MySQL is running
-
-----
-!!!6. Further Information
-
-Here you will find some other resources available in the internet
-
-----
-!!6.1. News groups
-
-Some of the most interesting news groups are:
-
-* alt.comp.mail.postfix - This is low traffic-group
-* comp.mail.imap
-
-Maybe you also check out your country newsgroups e.g ch.comp.os.linux
-
-Most newsgroups have their own FAQ that are designed to answer most of your questions, as the name Frequently Asked Questions indicate. Fresh versions should be posted regularly to the relevant newsgroups. If you cannot find it in your news spool you could go directly to the FAQ main archive FTP site. The WWW versions can be browsed at the FAQ main archive WWW site.
-
-----
-!!6.2. Mailing Lists
-----
-!6.2.1. postfix-users@postfix.org
-
-Send an mail to `majordomo@postfix.orgb with the content (not subject):
-
- subscribe postfix-users
-
-Before writing to the list, check out the archive at http://www.deja.com/group/mailing.postfix.users
-
-----
-!6.2.2. info-cyrus@lists.andrew.cmu.edu
-
-Send an mail to `majordomo@lists.andrew.cmu.edu` with the content (not subject):
-
- subscribe info-cyrus
-
-Before writing to the list, check out the archive at http://asg.web.cmu.edu/archive/index.php?mailbox=archive.info-cyrus
-
-----
-!!6.3. HOWTO
-
-These are intended as the primary starting points to get the background information as well as show you how to solve a specific problem. Some relevant HOWTOs are Cyrus-IMAP and Apache-Compile-HOWTO. The main site for these is the
[ LDP archive | http://tldp.org
]
-
-----
-!!6.4. Local Resources
-
-Distributions usually install some documentation to your system. As a standard they are located in /usr/share/doc/packages
-
-The SuSE rpms of Cyrus contains a lot a such documentation.
-
-Postfix has some html-files in the source directory /usr/local/postfix-20010228-pl08/html
-
-PAM comes also with lots of documentation in /usr/share/doc/packages/pam
-
-The pam_mysql module has a readme with the size of 1670 bytes :-(
-
-----
-!!6.5. Web Sites
-
-There are a huge number of informative web sites available. By their very nature they change quickly so do not be surprised if these links become quickly outdated.
-
-A good starting point is of course the Linux Documentation Project home page (http://tldp.org), an information central for documentation, project pages and much more.
-
-For detailed information about Postfix, then http://www.postfix.org would be the starting point.
-
-Please let me know if you have any other leads that can be of interest.
-
-----
-
-!!!7. Questions and Answers
-
-Here I answer the questions which I got from users. If you don't find an answer feel free to contact me
-
-* Q: Why MySQL and not LDAP?
-* A: Good question. LDAP is role-based and it would be indeed a better solution for such applications. Unfortunately LDAP is very hard to set up. You have to make proper schemes ''etc.'' MySQL is straightforward, it is very easy to handle, and versatile. There is a PAM module available for LDAP, feel free to use it.
-
-* Q: Why Postfix and not Qmail?
-* A: Lots of people like to see such a setup with Qmail. The reason why is, Mysql-support is a hack and not in the included in the main source-tree. This could end up in a bad situation. Think if a security hole is found in qmail and the patch does not work with the corrected version. Postfix is supporting MySQL natively. Another (personal) reason is that I find Postfix more sympatic (I don't know why)
-
-* Q: I got a Error: __"Temporary lookup failure"__
-* A: Postfix cannot look up the alias table. The most common failure is that MySQL is not running, or there is a authentication error. Check /var/log/mail and /usr/local/mysql/var/''hostname''.err to track the error
-
-* Q: Does this HOWTO also work on other platforms?
-* A: Unsure. I personally compiled MySQL and Apache on AIX 4.3 and 5.1L (php does not run properly on AIX), Solaris 6/7/8 and HP-UX. Cyrus, pam_mysql and cyrus I never tried. On Solaris there is maybe a chance to get pam_mysql running. On AIX there is no PAM, but a similar mechanism
. In short: Try it, and let me know if were successful
-
-----
-See PostfixNotes
-
-----
-<?plugin BackLinks?>
+Describe
[HowToPostfixCyrusWebcyradmHOWTO
] here
.
