Differences between version 2 and previous revision of sensors.conf.
Other diffs: Previous Major Revision, Previous Author, or view the Annotated Edit History
| Newer page: | version 2 | Last edited on Wednesday, July 30, 2003 5:50:17 pm | by JohnMcPherson | Revert |
| Older page: | version 1 | Last edited on Tuesday, July 15, 2003 9:49:25 pm | by JohnMcPherson | Revert |
@@ -1,5 +1,6 @@
-Config File
+Gigabyte GA-7VTX
+ ######################
# This is my (JohnMcPherson's) /etc/sensors.conf file for the
# LMSensors program for my Gigabyte GA-7VTX motherboard.
chip "it87-*" "it8705-*" "it8712-*"
label in0 "VCore 1"
@@ -55,4 +56,37 @@
set fan1_min 0
ignore fan2 # I currently don't have a case fan
set fan2_min 3000
ignore fan3
+ ######################
+
+
+
+Abit KT7 Motherboard
+ ######################
+ # this is almost identical to the default setup for this chip,
+ # apart from ignoring 2.5V and temp3
+ chip "via686a-*"
+ label "2.0V" "CPU core"
+ label "2.5V" "+2.5V"
+ ignore "2.5V" # not on the Abit KT7 ?
+ label "3.3V" "I/O"
+ label "5.0V" "+5V"
+ label "12V" "+12V"
+
+ label fan1 "CPU Fan"
+ label fan2 "P/S Fan"
+ label temp1 "SYS Temp"
+ label temp2 "CPU Temp"
+ label temp3 "SBr Temp"
+ ignore temp3 # not valid for Abit KT7 ?
+
+ set in0_min 1.6 # my duron's core seems to be about 1.7
+ set in0_max 1.8
+
+ set temp1_hyst 40
+ set temp1_over 45
+ set temp2_hyst 55
+ set temp2_over 60
+ set temp3_hyst 60
+ set temp3_over 65
+ ######################
