Penguin
Note: You are viewing an old revision of this page. View the current version.

Gigabyte GA-7VTX

  1. #####################
  2. This is my (JohnMcPherson's) /etc/sensors.conf file for the
  3. LMSensors program for my Gigabyte GA-7VTX motherboard.

chip "it87-" "it8705-" "it8712-*"

label in0 "VCore 1" label in1 "VCore 2" label in2 "+3.3V" label in3 "+5V" label in4 "+12V"

ignore in5 # Gigabyte 7VT E+

  1. label in5 "-12V"

ignore in6 # Gigabyte 7VT E+

  1. label in6 "-5V"

label in7 "Stdby"

ignore in8 # Gigabyte 7VT E+

  1. label in8 "VBat"

set in0_min 1.7 * 0.95 # I think my athlon has a core of 1.7 volts... set in0_max 1.7 * 1.05 # ditto...

  1. I'm not sure what vcore2 is actually measuring, but the bios consistently
  2. reports around 1.2 or so...

    set in1_min 1.2 * .95 set in1_max 1.2 * 1.05 set in2_min 3.3 * 0.95 set in2_max 3.3 * 1.05 set in3_min 5.0 * 0.95 set in3_max 5.0 * 1.05 set in4_min 12 * 0.95 set in4_max 12 * 1.05 set in5_max -12 * 0.95 set in5_min -12 * 1.05 set in6_max -5 * 0.95 set in6_min -5 * 1.05

  3. in7 == Stdby, seems to be 3 volts, rather than the default 5 in the orig cfg

    set in7_min 3 * 0.95 set in7_max 3 * 1.05

    1. the chip does not support in8 min/max

    ignore vid

  4. If 3.3V reads 2X too high (Soyo Dragon, for example),
  5. comment out following line.
  6. compute in2 2*@ , @/2 # commented out for GA-7VTX

compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((30/10) +1)*@ , @/((30/10) +1)

  1. Temperature
  2. I needed "temp_type=0x38" as an option to the module at modprobe time

    label temp1 "Temp1/MB" set temp1_over 40 set temp1_hyst 20 label temp2 "Temp2/CPU" set temp2_over 65 # I don't really know what temp is too hot... set temp2_hyst 25 ignore temp3

  3. Fans

    set fan1_min 0

ignore fan2 # I currently don't have a case fan

set fan2_min 3000 ignore fan3

  1. #####################

Abit KT7 Motherboard

  1. #####################
  2. this is almost identical to the default setup for this chip,
  3. apart from ignoring 2.5V and temp3

chip "via686a-*"

label "2.0V" "CPU core" label "2.5V" "+2.5V" ignore "2.5V" # not on the Abit KT7 ? label "3.3V" "I/O" label "5.0V" "+5V" label "12V" "+12V"

label fan1 "CPU Fan" label fan2 "P/S Fan" label temp1 "SYS Temp" label temp2 "CPU Temp" label temp3 "SBr Temp" ignore temp3 # not valid for Abit KT7 ?

set in0_min 1.6 # my duron's core seems to be about 1.7 set in0_max 1.8

set temp1_hyst 40 set temp1_over 45 set temp2_hyst 55 set temp2_over 60 set temp3_hyst 60 set temp3_over 65

                                          1. #
The following authors of this page have not agreed to the WlugWikiLicense. As such copyright to all content on this page is retained by the original authors.
  • AlejandroRiveira
The following authors of this page have agreed to the WlugWikiLicense.

PHP Warning

lib/plugin/WlugLicense.php:99: Warning: Invalid argument supplied for foreach()

lib/plugin/WlugLicense.php:111: Warning: in_array() [<a href='function.in-array'>function.in-array</a>]: Wrong datatype for second argument

lib/plugin/WlugLicense.php:111: Warning: in_array() [<a href='function.in-array'>function.in-array</a>]: Wrong datatype for second argument