Penguin

Differences between current version and predecessor to the previous major change of setserial(8).

Other diffs: Previous Revision, Previous Author, or view the Annotated Edit History

Newer page: version 2 Last edited on Tuesday, June 4, 2002 12:31:19 am by perry
Older page: version 1 Last edited on Tuesday, June 4, 2002 12:31:19 am by perry Revert
@@ -472,9 +472,9 @@
 /dev/ttyS0 (COM1), port 0x3f8, irq 4 
 /dev/ttyS1 (COM2), port 0x2f8, irq 3 
 /dev/ttyS2 (COM3), port 0x3e8, irq 4 
 /dev/ttyS3 (COM4), port 0x2e8, irq 3 
-Due to the limitations in the design of the AT/ISA bus architecture, normally an IRQ line may not be shared between two or more serial ports. If you attempt to do this, one or both serial ports will become unreliable if you try to use both simultaneously. This limitation can be overcome by special multi-port serial port boards, which are designed to share multiple serial ports over a single IRQ line. Multi-port serial cards supported by Linux include the AST FourPort, the Accent Async board, the Usenet Serial II board, the Bocaboard BB-1004, BB-1008, and BB-2016 boards, and the HUB-6 serial board. 
+Due to the limitations in the design of the AT/ISA bus architecture, normally an IRQ line may not be shared between two or more serial ports. If you attempt to do this, one or both serial ports will become unreliable if you try to use both simultaneously. This limitation can be overcome by special multi-port serial port boards, which are designed to share multiple serial ports over a single IRQ line. Multi-port serial cards supported by Linux include the AST ! FourPort, the Accent Async board, the Usenet Serial II board, the Bocaboard BB-1004, BB-1008, and BB-2016 boards, and the HUB-6 serial board. 
  
  
 The selection of an alternative IRQ line is difficult, since 
 most of them are already used. The following table lists the 
@@ -558,9 +558,9 @@
 Here are some multiport settings for some common serial 
 boards: 
  
  
-AST FourPort port1 0x1BF mask1 0xf match1 0xf 
+AST ! FourPort port1 0x1BF mask1 0xf match1 0xf 
 Boca BB-1004/8 port1 0x107 mask1 0xff match1 0 
 Boca BB-2016 port1 0x107 mask1 0xff match1 0 
 port2 0x147 mask2 0xff match2 0 
 !!Hayes ESP Configuration 
This page is a man page (or other imported legacy content). We are unable to automatically determine the license status of this page.