Home
Main website
Display Sidebar
Hide Ads
Recent Changes
View Source:
reset(1)
Edit
PageHistory
Diff
Info
LikePages
tset !!!tset NAME SYNOPSIS DESCRIPTION SETTING THE ENVIRONMENT TERMINAL TYPE MAPPING HISTORY COMPATIBILITY ENVIRONMENT FILES SEE ALSO ---- !!NAME __tset__, __reset__ - terminal initialization !!SYNOPSIS tset [[-IQVqrs] [[-] [[-e ''ch''] [[-i ''ch''] [[-k ''ch''] [[-m ''mapping''] [[''terminal''] reset [[-IQVqrs] [[-] [[-e ''ch''] [[-i ''ch''] [[-k ''ch''] [[-m ''mapping''] [[''terminal''] !!DESCRIPTION __Tset__ initializes terminals. __Tset__ first determines the type of terminal that you are using. This determination is done as follows, using the first terminal type found. 1. The __terminal__ argument specified on the command line. 2. The value of the __TERM__ environmental variable. 3. (BSD systems only.) The terminal type associated with the standard error output device in the ''/etc/ttys'' file. (On Linux and System-V-like UNIXes, ''getty'' does this job by setting __TERM__ according to the type passed to it by ''/etc/inittab''.) 4. The default terminal type, ``unknown''. If the terminal type was not specified on the command-line, the -m option mappings are then applied (see below for more information). Then, if the terminal type begins with a question mark (``?''), the user is prompted for confirmation of the terminal type. An empty response confirms the type, or, another type can be entered to specify a new type. Once the terminal type has been determined, the terminfo entry for the terminal is retrieved. If no terminfo entry is found for the type, the user is prompted for another terminal type. Once the terminfo entry is retrieved, the window size, backspace, interrupt and line kill characters (among many other things) are set and the terminal and tab initialization strings are sent to the standard error output. Finally, if the erase, interrupt and line kill characters have changed, or are not set to their default values, their values are displayed to the standard error output. When invoked as __reset__, __tset__ sets cooked and echo modes, turns off cbreak and raw modes, turns on newline translation and resets any unset special characters to their default values before doing the terminal initialization described above. This is useful after a program dies leaving a terminal in an abnormal state. Note, you may have to type ____ (the line-feed character is normally control-J) to get the terminal to work, as carriage-return may no longer work in the abnormal state. Also, the terminal will often not echo the command. The options are as follows: -q The terminal type is displayed to the standard output, and the terminal is not initialized in any way. The option `-' by itself is equivalent but archaic. -e Set the erase character to ''ch''. -I Do not send the terminal or tab initialization strings to the terminal. -Q Don't display any values for the erase, interrupt and line kill characters. __-V__ reports the version of ncurses which was used in this program, and exits. -i Set the interrupt character to ''ch''. -k Set the line kill character to ''ch''. -m Specify a mapping from a port type to a terminal. See below for more information. -r Print the terminal type to the standard error output. -s Print the sequence of shell commands to initialize the environment variable __TERM__ to the standard output. See the section below on setting the environment for details. The arguments for the -e, -i, and -k options may either be entered as actual characters or by using the `hat' notation, i.e. control-h may be specified as ``^H'' or ``^h''. !!SETTING THE ENVIRONMENT It is often desirable to enter the terminal type and information about the terminal's capabilities into the shell's environment. This is done using the -s option. When the -s option is specified, the commands to enter the information into the shell's environment are written to the standard output. If the __SHELL__ environmental variable ends in ``csh'', the commands are for __csh__, otherwise, they are for __sh__. Note, the __csh__ commands set and unset the shell variable __noglob__, leaving it unset. The following line in the __.login__ or __.profile__ files will initialize the environment correctly: eval tset -s options ... !!TERMINAL TYPE MAPPING When the terminal is not hardwired into the system (or the current system information is incorrect) the terminal type derived from the ''/etc/ttys'' file or the __TERM__ environmental variable is often something generic like __network__, __dialup__, or __unknown__. When __tset__ is used in a startup script it is often desirable to provide information about the type of terminal used on such ports. The purpose of the -m option is to map from some set of conditions to a terminal type, that is, to tell __tset__ ``If I'm on this port at a particular speed, guess that I'm on that kind of terminal''. The argument to the -m option consists of an optional port type, an optional operator, an optional baud rate specification, an optional colon (``:'') character and a terminal type. The port type is a string (delimited by either the operator or the colon character). The operator may be any combination of `` If the terminal type is not specified on the command line, the -m mappings are applied to the terminal type. If the port type and baud rate match the mapping, the terminal type specified in the mapping replaces the current type. If more than one mapping is specified, the first applicable mapping is used. For example, consider the following mapping: __dialup__. The port type is dialup , the operator is __dialup__, and the baud rate is greater than 9600 baud, a terminal type of __vt100__ will be used. If no baud rate is specified, the terminal type will match any baud rate. If no port type is specified, the terminal type will match any port type. For example, __-m dialup:vt100 -m :?xterm__ will cause any dialup port, regardless of baud rate, to match the terminal type vt100, and any non-dialup port type to match the terminal type ?xterm. Note, because of the leading question mark, the user will be queried on a default port as to whether they are actually using an xterm terminal. No whitespace characters are permitted in the -m option argument. Also, to avoid problems with meta-characters, it is suggested that the entire -m option argument be placed within single quote characters, and that __csh__ users insert a backslash character (``'') before any exclamation marks (``!''). !!HISTORY The __tset__ command appeared in BSD 3.0. The __ncurses__ implementation was lightly adapted from the 4.4BSD sources for a terminfo environment by Eric S. Raymond __ !!COMPATIBILITY The __tset__ utility has been provided for backward-compatibility with BSD environments (under most modern UNIXes, __/etc/inittab__ and getty(1) can set __TERM__ appropriately for each dial-up line; this obviates what was __tset__'s most important use). This implementation behaves like 4.4BSD tset, with a few exceptions specified here. The -S option of BSD tset no longer works; it prints an error message to stderr and dies. The -s option only sets __TERM__, not __TERMCAP__. Both these changes are because the __TERMCAP__ variable is no longer supported under terminfo-based __ncurses__, which makes __tset -S__ useless (we made it die noisily rather than silently induce lossage). There was an undocumented 4.4BSD feature that invoking tset via a link named `TSET` (or via any other name beginning with an upper-case letter) set the terminal to use upper-case only. This feature has been omitted. The -A, -E, -h, -u and -v options were deleted from the __tset__ utility in 4.4BSD. None of them were documented in 4.3BSD and all are of limited utility at best. The -a, -d, and -p options are similarly not documented or useful, but were retained as they appear to be in widespread use. It is strongly recommended that any usage of these three options be changed to use the -m option instead. The -n option remains, but has no effect. The -adnp options are therefore omitted from the usage summary above. It is still permissible to specify the -e, -i, and -k options without arguments, although it is strongly recommended that such usage be fixed to explicitly specify the character. As of 4.4BSD, executing __tset__ as __reset__ no longer implies the -Q option. Also, the interaction between the - option and the ''terminal'' argument in some historic implementations of __tset__ has been removed. !!ENVIRONMENT The __tset__ command uses the __SHELL__ and __TERM__ environment variables. !!FILES /etc/ttys system port name to terminal type mapping database (BSD versions only). /usr/share/terminfo terminal capability database !!SEE ALSO csh(1), sh(1), stty(1), tty(4), termcap(5), ttys(5), environ(7) ----
2 pages link to
reset(1)
:
Man1r
console_codes(4)
This page is a man page (or other imported legacy content). We are unable to automatically determine the license status of this page.
