Penguin
Note: You are viewing an old revision of this page. View the current version.

RANDOM

RANDOM

NAME DESCRIPTION CONFIGURING FILES AUTHOR SEE ALSO


NAME

random, urandom - kernel random number source devices

DESCRIPTION

The character special files /dev/random and /dev/urandom (present since Linux 1.3.30) provide an interface to the kernel's random number generator. File /dev/random has major device number 1 and minor device number 8. File /dev/urandom has major device number 1 and minor device number 9.

The random number generator gathers environmental noise from device drivers and other sources into an entropy pool. The generator also keeps an estimate of the number of bit of the noise in the entropy pool. From this entropy pool random numbers are created.

When read, the /dev/random device will only return random bytes within the estimated number of bits of noise in the entropy pool. /dev/random should be suitable for uses that need very high quality randomness such as one-time pad or key generation. When the entropy pool is empty, reads to /dev/random will block until additional environmental noise is gathered.

When read, /dev/urandom device will return as many bytes as are requested. As a result, if there is not sufficient entropy in the entropy pool, the returned values are theoretically vulnerable to a cryptographic attack on the algorithms used by the driver. Knowledge of how to do this is not available in the current non-classified literature, but it is theoretically possible that such an attack may exist. If this is a concern in your application, use /dev/random instead.

CONFIGURING

If your system does not have /dev/random and /dev/urandom created already, they can be created

with the following commands

mknod -m 644 /dev/random c 1 8

mknod -m 644 /dev/urandom c 1 9 chown root:root /dev/random /dev/urandom

When a Linux system starts up without much operator interaction, the entropy pool may be in a fairly predictable state. This reduces the actual amount of noise in the entropy pool below the estimate. In order to counteract this effect, it helps to carry entropy pool information across shut-downs and start-ups. To do this, add the following lines to an appropriate script which is run during the Linux system start-up sequence
echo
Also, add the following lines in an appropriate script which is run during the Linux system shutdown
  1. Carry a random seed from shut-down to start-up for the random
  1. number generator. Save 512 bytes, which is the size of the
  2. random number generator's entropy pool.

echo

FILES

/dev/random /dev/urandom

AUTHOR

The kernel's random number generator was written by Theodore Ts'o (tytso@athena.mit.edu).

SEE ALSO

mknod (1) RFC 1750,


This page is a man page (or other imported legacy content). We are unable to automatically determine the license status of this page.