PERLRUN
NAME SYNOPSIS DESCRIPTION ENVIRONMENT
perlrun - how to execute the Perl interpreter
perl [ __-CsTuUWX__? [ __-hv__? ''configvar''? ] [ __-cw__? ''debugger''? ] __-D__[[''number/list''? ] [ __-pna__? __-F__''pattern''? [ __-l__[[''octal''? ] __-0__[[''octal''? ] [ __-I__''dir''? __-m__[[__-__?module ] __-M__[[__-__?'module...' ] [ __-P__? __-S__? [ __-x__[[''dir''? ] __-i__[[''extension''? ] [ __-e__ '''command'''? [ __--__? [ ''programfile''? [ ''argument''?...
The normal way to run a Perl program is by making it directly executable, or else by passing the name of the source file as an argument on the command line. (An interactive Perl environment is also possible--see perldebug for details on how to do that.) Upon startup, Perl looks for your program in one of the following places:
1.
Specified line by line via -e switches on the command line.
2.
Contained in the file specified by the first filename on the command line. (Note that systems supporting the #! notation invoke interpreters this way. See ``Location of Perl''.)
3.
Passed in implicitly via standard input. This works only if there are no filename arguments--to pass arguments to a STDIN-read program you must explicitly specify a ``-'' for the program name.
With methods 2 and 3, Perl starts parsing the input file from the beginning, unless you've specified a -x switch, in which case it scans for the first line starting with #! and containing the word ``perl'', and starts there instead. This is useful for running a program embedded in a larger message. (In this case you would indicate the end of the program using the END token.)
The #! line is always examined for switches as the line is being parsed. Thus, if you're on a machine that allows only one argument with the #! line, or worse, doesn't even recognize the #! line, you still can get consistent switch behavior regardless of how Perl was invoked, even if -x was used to find the beginning of the program.
Because historically some operating systems silently chopped off kernel interpretation of the #! line after 32 characters, some switches may be passed in on the command line, and some may not; you could even get a ``- without its letter, if you're not careful. You probably want to make sure that all your switches fall either before or after that 32-character boundary. Most switches don't actually care if they're processed redundantly, but getting a ``- instead of a complete switch could cause Perl to try to execute standard input instead of your program. And a partial -I switch could also cause odd results.
Some switches do care if they are processed twice, for instance combinations of -l and -0. Either put all the switches after the 32-character boundary (if applicable), or replace the use of -0digits by BEGIN{ $/ = .
Parsing of the #! switches starts wherever ``perl is mentioned in the line. The sequences ``-* and ``- '' are specifically ignored so that you could, if you were so inclined, say
eval 'exec perl -wS $0 ${1+ to let Perl see the -p switch.
A similar trick involves the env program, if you have it.
The examples above use a relative path to the perl interpreter, getting whatever version is first in the user's path. If you want a specific version of Perl, say, perl5.005_57, you should place that directly in the #! line's path.
If the #! line does not contain the word ``perl, the program named after the #! is executed instead of the Perl interpreter. This is slightly bizarre, but it helps people on machines that don't do #!, because they can tell a program that their SHELL is /usr/bin/perl'', and Perl will then dispatch the program to the correct interpreter for them.
After locating your program, Perl compiles the entire program to an internal form. If there are any compilation errors, execution of the program is not attempted. (This is unlike the typical shell script, which might run part-way through before finding a syntax error.)
If the program is syntactically correct, it is executed. If the program runs off the end without hitting an exit() or die() operator, an implicit exit(0) is provided to indicate successful completion.
#! and quoting on non-Unix systems
Unix's #! technique can be simulated on other systems:
OS/2
Put
extproc perl -S -your_switches
as the first line in *.cmd file (-S due to a bug in cmd.exe's `extproc' handling).
MS-DOS
Create a batch file to run your program, and codify it in ALTERNATIVE_SHEBANG (see the dosish.h file in the source distribution for more information).
Win95/NT
The Win95/NT installation, when using the !ActiveState? installer for Perl, will modify the Registry to associate the .pl extension with the perl interpreter. If you install Perl by other means (including building from the sources), you may have to modify the Registry yourself. Note that this means you can no longer tell the difference between an executable Perl program and a Perl library file.
Macintosh
A Macintosh perl program will have the appropriate Creator and Type, so that double-clicking them will invoke the perl application.
VMS
Put
$ perl -mysw 'f$env(
at the top of your program, where -mysw are any command line switches you want to pass to Perl. You can now invoke the program directly, by saying perl program, or as a DCL procedure, by saying @program (or implicitly via DCL$PATH by just using the name of the program).
This incantation is a bit much to remember, but Perl will display it for you if you say perl .
Command-interpreters on non-Unix systems have rather different ideas on quoting than Unix shells. You'll need to learn the special characters in your command-interpreter (*, \ and are common) and how to protect whitespace and these characters to run one-liners (see -e below).
On some systems, you may have to change single-quotes to double ones, which you must not do on Unix or Plan9 systems. You might also have to change a single % to a %%.
perl -e 'print
perl -e
perl -e
CMD .EXE in Windows NT slipped a lot of standard Unix functionality in when nobody was looking, but just try to find documentation for its quoting rules.
Under the Macintosh, it depends which environment you are using. The !MacPerl? shell, or MPW , is much like Unix shells in its support for several quoting variants, except that it makes free use of the Macintosh's non-ASCII characters as control characters.
There is no general solution to all of this. It's just a mess.
Location of Perl
It may seem obvious to say, but Perl is useful only when users can easily find it. When possible, it's good for both /usr/bin/perl and /usr/local/bin/perl to be symlinks to the actual binary. If that can't be done, system administrators are strongly encouraged to put (symlinks to) perl and its accompanying utilities into a directory typically found along a user's PATH , or in some other obvious and convenient place.
In this documentation, #!/usr/bin/perl on the first line of the program will stand in for whatever method works on your system. You are advised to use a specific path if you care about a specific version.
Command Switches
As with all standard commands, a single-character switch may be clustered with the following switch, if any.
Switches include:
-0[''digits''?
specifies the input record separator ($/) as an octal number. If there are no digits, the null character is the separator. Other switches may precede or follow the digits. For example, if you have a version of find which can print filenames terminated by the null character,
The special value 00 will cause Perl to slurp files in paragraph mode. The value 0777 will cause Perl to slurp files whole because there is no legal character with that value.
-a
turns on autosplit mode when used with a -n or -p. An implicit split command to the @F array is done as the first thing inside the implicit while loop produced by the -n or -p.
perl -ane 'print pop(@F),
is equivalent to
while (
An alternate delimiter may be specified using -F.
-C
enables Perl to use the native wide character APIs on the target system. The magic variable ${^WIDE_SYSTEM_CALLS} reflects the state of this switch. See ``${^WIDE_SYSTEM_CALLS}'' in perlvar.
This feature is currently only implemented on the Win32 platform.
-c
causes Perl to check the syntax of the program and then exit without executing it. Actually, it will execute BEGIN, CHECK, and use blocks, because these are considered as occurring outside the execution of your program. INIT and END blocks, however, will be skipped.
-d
runs the program under the Perl debugger. See perldebug.
-d:foo[=bar,baz?
runs the program under the control of a debugging, profiling, or tracing module installed as Devel::foo. E.g., -d:DProf executes the program using the Devel::DProf profiler. As with the -M flag, options may be passed to the Devel::foo package where they will be received and interpreted by the Devel::foo::import routine. The comma-separated list of options must follow a = character. See perldebug.
-Dletters
-Dnumber
sets debugging flags. To watch how it executes your program, use -Dtls. (This works only if debugging is compiled into your Perl.) Another nice value is -Dx, which lists your compiled syntax tree. And -Dr displays compiled regular expressions. As an alternative, specify a number instead of list of letters (e.g., -D14 is
1 p Tokenizing and parsing
2 s Stack snapshots 4 l Context (loop) stack processing 8 t Trace execution 16 o Method and overloading resolution 32 c String/numeric conversions 64 P Print preprocessor command for -P, source file input state 128 m Memory allocation 256 f Format processing 512 r Regular expression parsing and execution 1024 x Syntax tree dump 2048 u Tainting checks 4096 L Memory leaks (needs -DLEAKTEST when compiling Perl) 8192 H Hash dump -- usurps values() 16384 X Scratchpad allocation 32768 D Cleaning up 65536 S Thread synchronization 131072 T Tokenising All these flags require -DDEBUGGING when you compile the Perl executable. See the INSTALL file in the Perl source distribution for how to do this. This flag is automatically set if you include -g option when Configure asks you about optimizer/debugger flags.
If you're just trying to get a print out of each line of Perl code as it executes, the way that sh -x provides for shell scripts, you can't use Perl's -D switch. Instead do this
$ PERLDB_OPTS=
% (setenv PERLDB_OPTS See perldebug for details and variations.
-e commandline
may be used to enter one line of program. If -e is given, Perl will not look for a filename in the argument list. Multiple -e commands may be given to build up a multi-line script. Make sure to use semicolons where you would in a normal program.
-Fpattern
specifies the pattern to split on if -a is also in effect. The pattern may be surrounded by //, , or '', otherwise it will be put in single quotes.
-h
prints a summary of the options.
-i[''extension''?
specifies that files processed by the construct are to be edited in-place. It does this by renaming the input file, opening the output file by the original name, and selecting that output file as the default for print() statements. The extension, if supplied, is used to modify the name of the old file to make a backup copy, following these rules:
If no extension is supplied, no backup is made and the current file is overwritten.
If the extension doesn't contain a *, then it is appended to the end of the current filename as a suffix. If the extension does contain one or more * characters, then each * is replaced with the current filename. In Perl terms, you could think of this
$ perl -pi '*' -e 's/bar/baz/' fileA # overwrite current file
$ perl -pi '.orig' -e 's/bar/baz/' fileA # backup to 'fileA.orig'
$ perl -pi '*.orig' -e 's/bar/baz/' fileA # backup to 'fileA.orig' From the shell, saying
$ perl -p -i.orig -e
s/foo/bar/; which is equivalent to
$extension = '.orig'; LINE: while ( except that the -i form doesn't need to compare $ARGV to $oldargv to know when the filename has changed. It does, however, use ARGVOUT for the selected filehandle. Note that STDOUT is restored as the default output filehandle after the loop.
As shown above, Perl creates the backup file whether or not any output is actually changed. So this is just a fancy way
or $ perl -p -i '.orig' -e 1 file1 file2 file3... You can use eof without parentheses to locate the end of each input file, in case you want to append to each file, or reset line numbering (see example in ``eof'' in perlfunc).
If, for a given file, Perl is unable to create the backup file as specified in the extension then it will skip that file and continue on with the next one (if it exists).
For a discussion of issues surrounding file permissions and -i, see ``Why does Perl let me delete read-only files? Why does -i clobber protected files? Isn't this a bug in Perl?'' in perlfaq5.
You cannot use -i to create directories or to strip extensions from files.
Perl does not expand in filenames, which is good,
Finally, the -i switch does not impede execution when no files are given on the command line. In this case, no backup is made (the original file cannot, of course, be determined) and processing proceeds from STDIN to STDOUT as might be expected.
-Idirectory
Directories specified by -I are prepended to the search path for modules (@INC), and also tells the C preprocessor where to search for include files. The C preprocessor is invoked with -P; by default it searches /usr/include and /usr/lib/perl.
-l[''octnum''?
enables automatic line-ending processing. It has two separate effects. First, it automatically chomps $/ (the input record separator) when used with -n or -p. Second, it assigns $\ (the output record separator) to have the value of octnum so that any print statements will have that separator added back on. If octnum is omitted, sets $\ to the current value of $/. For instance, to trim lines to 80
This sets $\ to newline and then sets $/ to the null character.
-m[__-__?module
-M[__-__?module
-M[__-__?'module ...'
-[mM?[__-__?module=arg[,arg?...
-mmodule executes use module (); before executing your program.
-Mmodule executes use module ; before executing your program. You can use quotes to add extra code after the module name, e.g., '-Mmodule qw(foo bar)'.
If the first character after the -M or -m is a dash (-) then the 'use' is replaced with 'no'.
A little builtin syntactic sugar means you can also say -mmodule=foo,bar or -Mmodule=foo,bar as a shortcut for '-Mmodule qw(foo bar)'. This avoids the need to use quotes when importing symbols. The actual code generated by -Mmodule=foo,bar is use module split(/,/,q{foo,bar}). Note that the = form removes the distinction between -m and -M.
-n
causes Perl to assume the following loop around your program, which makes it iterate over filename arguments
while ( Note that the lines are not printed by default. See -p to have lines printed. If a file named by an argument cannot be opened for some reason, Perl warns you about it and moves on to the next file.
Here is an efficient way to delete all files older than a
This is faster than using the -exec switch of find because you don't have to start a process on every filename found. It does suffer from the bug of mishandling newlines in pathnames, which you can fix if you
BEGIN and END blocks may be used to capture control before or after the implicit program loop, just as in awk.
-p
causes Perl to assume the following loop around your program, which makes it iterate over filename arguments
while ( If a file named by an argument cannot be opened for some reason, Perl warns you about it, and moves on to the next file. Note that the lines are printed automatically. An error occurring during printing is treated as fatal. To suppress printing use the -n switch. A -p overrides a -n switch.
BEGIN and END blocks may be used to capture control before or after the implicit loop, just as in awk.
-P
causes your program to be run through the C preprocessor before compilation by Perl. Because both comments and cpp directives begin with the # character, you should avoid starting comments with any words recognized by the C preprocessor such as , , or . Also, in some platforms the C preprocessor knows too much: it knows about the C ++ -style until-end-of-line comments starting with . This will cause problems with common Perl constructs like
s/foo//;
because after -P this will became illegal code
s/foo
-s
enables rudimentary switch parsing for switches on the command line after the program name but before any filename arguments (or before an argument of --). This means you can have switches with two leading dashes (--help). Any switch found there is removed from @ARGV and sets the corresponding variable in the Perl program. The following program prints ``1 if the program is invoked with a -xyz switch, and ``abc if it is invoked with -xyz=abc.
if ($xyz) { print Do note that --help creates the variable ${-help}, which is not compliant with strict refs.
-S
makes Perl use the PATH environment variable to search for the program (unless the name of the program contains directory separators).
On some platforms, this also makes Perl append suffixes to the filename while searching for it. For example, on Win32 platforms, the ``.bat and ``.cmd suffixes are appended if a lookup for the original name fails, and if the name does not already end in one of those suffixes. If your Perl was compiled with DEBUGGING turned on, using the -Dp switch to Perl shows how the search progresses.
Typically this is used to emulate #! startup on platforms that don't support #!. This example works on many platforms
eval 'exec /usr/bin/perl -wS $0 ${1+
eval '(exit $?0)'
If the filename supplied contains directory separators (i.e., is an absolute or relative pathname), and if that file is not found, platforms that append file extensions will do so and try to look for the file with those extensions added, one by one.
On DOS-like platforms, if the program does not contain directory separators, it will first be searched for in the current directory before being searched for on the PATH . On Unix platforms, the program will be searched for strictly on the PATH .
-T
forces ``taint'' checks to be turned on so you can test them. Ordinarily these checks are done only when running setuid or setgid. It's a good idea to turn them on explicitly for programs that run on behalf of someone else whom you might not necessarily trust, such as CGI programs or any internet servers you might write in Perl. See perlsec for details. For security reasons, this option must be seen by Perl quite early; usually this means it must appear early on the command line or in the #! line for systems which support that construct.
-u
This obsolete switch causes Perl to dump core after compiling your program. You can then in theory take this core dump and turn it into an executable file by using the undump program (not supplied). This speeds startup at the expense of some disk space (which you can minimize by stripping the executable). (Still, a ``hello world executable comes out to about 200K on my machine.) If you want to execute a portion of your program before dumping, use the dump()'' operator instead. Note: availability of undump is platform specific and may not be available for a specific port of Perl.
This switch has been superseded in favor of the new Perl code generator backends to the compiler. See B and B::Bytecode for details.
-U
allows Perl to do unsafe operations. Currently the only ``unsafe operations are the unlinking of directories while running as superuser, and running setuid programs with fatal taint checks turned into warnings. Note that the -w switch (or the $^W variable) must be used along with this option to actually generate'' the taint-check warnings.
-v
prints the version and patchlevel of your perl executable.
-V
prints summary of the major perl configuration values and the current values of @INC.
-V:name
Prints to STDOUT the value of the named configuration variable. For example,
$ perl -V:man.dir
will provide strong clues about what your MANPATH variable should be set to in order to access the Perl documentation.
-w
prints warnings about dubious constructs, such as variable names that are mentioned only once and scalar variables that are used before being set, redefined subroutines, references to undefined filehandles or filehandles opened read-only that you are attempting to write on, values used as a number that doesn't look like numbers, using an array as though it were a scalar, if your subroutines recurse more than 100 deep, and innumerable other things.
This switch really just enables the internal ^$W variable. You can disable or promote into fatal errors specific warnings using WARN hooks, as described in perlvar and ``warn'' in perlfunc. See also perldiag and perltrap. A new, fine-grained warning facility is also available if you want to manipulate entire classes of warnings; see warnings or perllexwarn.
-W
Enables all warnings regardless of no warnings or $^W. See perllexwarn.
-X
Disables all warnings regardless of use warnings or $^W. See perllexwarn.
-x directory
tells Perl that the program is embedded in a larger chunk of unrelated ASCII text, such as in a mail message. Leading garbage will be discarded until the first line that starts with #! and contains the string ``perl''. Any meaningful switches on that line will be applied. If a directory name is specified, Perl will switch to that directory before running the program. The -x switch controls only the disposal of leading garbage. The program must be terminated with END if there is trailing garbage to be ignored (the program can process any or all of the trailing garbage via the DATA filehandle if desired).
HOME Used if chdir has no argument.
LOGDIR
Used if chdir has no argument and HOME is not set.
PATH Used in executing subprocesses, and in finding the program if -S is used.
PERL5LIB
A colon-separated list of directories in which to look for Perl library files before looking in the standard library and the current directory. Any architecture-specific directories under the specified locations are automatically included if they exist. If PERL5LIB is not defined, PERLLIB is used.
When running taint checks (either because the program was running setuid or setgid, or the -T switch was used), neither variable is used. The program should instead
PERL5OPT
Command-line options (switches). Switches in this variable are taken as if they were on every Perl command line. Only the -[DIMUdmw? switches are allowed. When running taint checks (because the program was running setuid or setgid, or the -T switch was used), this variable is ignored. If PERL5OPT begins with -T, tainting will be enabled, and any subsequent options ignored.
PERLLIB
A colon-separated list of directories in which to look for Perl library files before looking in the standard library and the current directory. If PERL5LIB is defined, PERLLIB is not used.
PERL5DB
The command used to load the debugger code. The default
BEGIN { require 'perl5db.pl' }
PERL5SHELL (specific to the Win32 port)
May be set to an alternative shell that perl must use internally for executing ``backtick commands or system()''. Default is cmd.exe /x/c on WindowsNT and command.com /c on Windows95. The value is considered to be space-separated. Precede any character that needs to be protected (like a space or backslash) with a backslash.
Note that Perl doesn't use COMSPEC for this purpose because COMSPEC has a high degree of variability among users, leading to portability concerns. Besides, perl can use a shell that may not be fit for interactive use, and setting COMSPEC to such a shell may interfere with the proper functioning of other programs (which usually look in COMSPEC to find a shell fit for interactive use).
PERL_DEBUG_MSTATS
Relevant only if perl is compiled with the malloc included with the perl distribution (that is, if perl
statistics to be dumped after execution. If set to an integer greater than one, also causes memory statistics to be dumped after compilation.
PERL_DESTRUCT_LEVEL
Relevant only if your perl executable was built with -DDEBUGGING, this controls the behavior of global destruction of objects and other references.
PERL_ROOT (specific to the VMS port)
A translation concealed rooted logical name that contains perl and the logical device for the @INC path on VMS only. Other logical names that affect perl on VMS include PERLSHR , PERL_ENV_TABLES , and SYS$TIMEZONE_DIFFERENTIAL but are optional and discussed further in perlvms and in README .vms in the Perl source distribution.
SYS$LOGIN (specific to the VMS port)
Used if chdir has no argument and HOME and LOGDIR are not set.
Perl also has environment variables that control how Perl handles data specific to particular natural languages. See perllocale.
Apart from these, Perl uses no other environment variables, except to make them available to the program being executed, and to child processes. However, programs running setuid would do well to execute the following lines before doing
$ENV{SHELL} = '/bin/sh' if exists $ENV{SHELL}; delete @ENV{qw(IFS CDPATH ENV BASH_ENV)};
3 pages link to perlrun(1):
