perlre - Perl regular expressions


This page describes the syntax of regular expressions in Perl. For a description of how to use regular expressions in matching operations, plus various examples of the same, see discussions of m//, s///, qr// and ?? in ``Regexp Quote-Like Operators'' in perlop.

Matching operations can have various modifiers. Modifiers that relate to the interpretation of the regular expression inside are listed below. Modifiers that alter the way a regular expression is used by Perl are detailed in ``Regexp Quote-Like Operators in perlop and ``Gory details of parsing quoted constructs in perlop.


Do case-insensitive pattern matching.

If use locale is in effect, the case map is taken from the current locale. See perllocale.


Treat string as multiple lines. That is, change ``^ and ``$ from matching the start or end of the string to matching the start or end of any line anywhere within the string.


Treat string as single line. That is, change ``.'' to match any character whatsoever, even a newline, which normally it would not match.

The /s and /m modifiers both override the $* setting. That is, no matter what $* contains, /s without /m will force ``^ to match only at the beginning of the string and ``$ to match only at the end (or just before a newline at the end) of the string. Together, as /ms, they let the ``. match any character whatsoever, while still allowing ``^ and ``$'' to match, respectively, just after and just before newlines within the string.


Extend your pattern's legibility by permitting whitespace and comments.

These are usually written as /x modifier (?...) construct. See below.

The /x modifier itself needs a little more explanation. It tells the regular expression parser to ignore whitespace that is neither backslashed nor within a character class. You can use this to break up your regular expression into (slightly) more readable parts. The

  1. character is also treated as a metacharacter

introducing a comment, just as in ordinary Perl code. This also means that if you want real whitespace or # characters in the pattern (outside a character class, where they are unaffected by /x), that you'll either have to escape them or encode them using octal or hex escapes. Taken together, these features go a long way towards making Perl's regular expressions more readable. Note that you have to be careful not to include the pattern delimiter in the comment--perl has no way of knowing you did not intend to close the pattern early. See the C-comment deletion code in perlop.

Regular Expressions

The patterns used in Perl pattern matching derive from supplied in the Version 8 regex routines. (The routines are derived (distantly) from Henry Spencer's freely redistributable reimplementation of the V8 routines.) See ``Version 8 Regular Expressions'' for details.

In particular the following metacharacters have their

standard egrep-ish meanings
\ Quote the next metacharacter

^ Match the beginning of the line . Match any character (except newline) $ Match the end of the line (or before newline at the end) Alternation () Grouping [? Character class By default, the ``^ character is guaranteed to match only the beginning of the string, the ``$ character only the end (or before the newline at the end), and Perl does certain optimizations with the assumption that the string contains only one line. Embedded newlines will not be matched by ``^ or ``$. You may, however, wish to treat a string as a multi-line buffer, such that the ``^ will match after any newline within the string, and ``$ will match before any newline. At the cost of a little more overhead, you can do this by using the /m modifier on the pattern match operator. (Older programs did this by setting $*, but this practice is now deprecated.)

To simplify multi-line substitutions, the ``.'' character never matches a newline unless you use the /s modifier, which in effect tells Perl to pretend the string is a single line--even if it isn't. The /s modifier also overrides the setting of $*, in case you have some (badly behaved) older code that sets it in another module.

The following standard quantifiers are

  • Match 0 or more times
  • Match 1 or more times

? Match 1 or 0 times {n} Match exactly n times {n,} Match at least n times {n,m} Match at least n but not more than m times

(If a curly bracket occurs in any other context, it is treated as a regular character.) The ``* modifier is equivalent to {0,}, the ``+ modifier to {1,}, and the ``?'' modifier to {0,1}. n and m are limited to integral values less than a preset limit defined when perl is built. This is usually 32766 on the most common platforms. The actual limit can be seen in the error message generated by code such as this
$_ **= $_ , / {$_} / for 2 .. 42;
By default, a quantified subpattern is ``greedy, that is, it will match as many times as possible (given a particular starting location) while still allowing the rest of the pattern to match. If you want it to match the minimum number of times possible, follow the quantifier with a ``?. Note that the meanings don't change, just the ``greediness''
  • ? Match 0 or more times
  • ? Match 1 or more times

?? Match 0 or 1 time {n}? Match exactly n times {n,}? Match at least n times {n,m}? Match at least n but not more than m times

Because patterns are processed as double quoted strings, the following also work
t tab (HT, TAB)

n newline (LF, NL) r return (CR) f form feed (FF) a alarm (bell) (BEL) e escape (think troff) (ESC) 033 octal char (think of a PDP-11) x1B hex char x{263a} wide hex char (Unicode SMILEY) c[[ control char N{name} named char l lowercase next char (think vi) u uppercase next char (think vi) L lowercase till E (think vi) U uppercase till E (think vi) E end case modification (think vi) Q quote (disable) pattern metacharacters till E If use locale is in effect, the case map used by l, L, u and U is taken from the current locale. See perllocale. For documentation of N{name}, see charnames.

You cannot include a literal $ or @ within a Q sequence. An unescaped $ or @ interpolates the corresponding variable, while escaping will cause the literal string $ to be matched. You'll need to write something like m/QuserE@Qhost/.

In addition, Perl defines the following
w Match a

A w matches a single alphanumeric character or _, not a whole word. Use w+ to match a string of Perl-identifier characters (which isn't the same as matching an English word). If use locale is in effect, the list of alphabetic characters generated by w is taken from the current locale. See perllocale. You may use w, W, s, S, d, and D within character classes, but if you try to use them as endpoints of a range, that's not a range, the ``-'' is understood literally. See utf8 for details about pP, PP, and X.

The POSIX character class syntax


is also available. The available classes and their backslash equivalents (if available) are as follows

alnum ascii blank [1? cntrl digit d graph lower print punct space s [2? upper word w [3? xdigit

[1? A GNU extension equivalent to C

For example use upper:? to match all the uppercase characters. Note that the [? are part of the :? construct, not part of the whole character class. For example

matches zero, one, any alphabetic character, and the percentage sign.

If the utf8 pragma is used, the following equivalences to Unicode p{} constructs and equivalent backslash character classes (if available), will

alpha !IsAlpha?

alnum !IsAlnum? ascii IsASCII blank !IsSpace? cntrl !IsCntrl? digit !IsDigit? d graph !IsGraph? lower !IsLower? print !IsPrint? punct !IsPunct? space !IsSpace?

IsSpacePerl? s

upper !IsUpper? word !IsWord? xdigit IsXDigit For example lower:? and p{!IsLower?} are equivalent.

If the utf8 pragma is not used but the locale pragma is, the classes correlate with the usual isalpha(3) interface (except for `word' and `blank').

The assumedly non-obviously named classes are:


Any control character. Usually characters that don't produce output as such but instead control the terminal somehow: for example newline and backspace are control characters. All characters with ord() less than 32 are most often classified as control characters (assuming ASCII , the ISO Latin character sets, and Unicode).


Any alphanumeric or punctuation (special) character.


Any alphanumeric or punctuation (special) character or space.


Any punctuation (special) character.


Any hexadecimal digit. Though this may feel silly ([0-9A-Fa-f? would work just fine) it is included for completeness.

You can negate the :? character classes by prefixing the class name with a '^'. This is a Perl extension. For

POSIX trad. Perl utf8 Perl ^digit:? D P{!IsDigit?}

^space:? S P{!IsSpace?} ^word:? W P{!IsWord?} The POSIX character classes [.cc.? and [=cc=? are recognized but not supported and trying to use them will cause an error.

Perl defines the following zero-width

b Match a word boundary

B Match a non-(word boundary) A Match only at beginning of string Z Match only at end of string, or before newline at the end z Match only at end of string G Match only at pos() (e.g. at the end-of-match position of prior m//g) A word boundary (b) is a spot between two characters that has a w on one side of it and a W on the other side of it (in either order), counting the imaginary characters off the beginning and end of the string as matching a W. (Within character classes b represents backspace rather than a word boundary, just as it normally does in any double-quoted string.) The A and Z are just like ``^ and ``$, except that they won't match multiple times when the /m modifier is used, while ``^ and ``$ will match at every internal line boundary. To match the actual end of the string and not ignore an optional trailing newline, use z.

The G assertion can be used to chain global matches (using m//g), as described in ``Regexp Quote-Like Operators in perlop. It is also useful when writing lex-like scanners, when you have several patterns that you want to match against consequent substrings of your string, see the previous reference. The actual location where G will match can also be influenced by using pos() as an lvalue. See ``pos in perlfunc.

The bracketing construct ( ... ) creates capture buffers. To refer to the digit'th buffer use $1 for details.) Referring back to another part of the match is called a backreference.

There is no limit to the number of captured substrings that you may use. However Perl also uses 10, 11, etc. as aliases for 010, 011, etc. (Recall that 0 means octal, so 011 is the character at number 9 in your coded character set; which would be the 10th character, a horizontal tab under ASCII .) Perl resolves this ambiguity by interpreting 10 as a backreference only if at least 10 left parentheses have opened before it. Likewise 11 is a backreference only if at least 11 left parentheses have opened before it. And so on. 1 through 9 are always interpreted as backreferences.


s/^([^?) *([^?)/$2 $1/; # swap first two words

if (/(.)1/) { # find first doubled char


if (/Time: (..):(..):(..)/) { # parse out values

$hours = $1; $minutes = $2; $seconds = $3; } Several special variables also refer back to portions of the previous match. $+ returns whatever the last bracket match matched. $ returns the entire matched string. (At one point $0 did also, but now it returns the name of the program.) $` returns everything before the matched string. And $' returns everything after the matched string.

The numbered variables ($1, $2, $3, etc.) and the related punctuation set ($+, $, $`, and $') are all dynamically scoped until the end of the enclosing block or until the next successful match, whichever comes first. (See ``Compound Statements'' in perlsyn.)

WARNING : Once Perl sees that you need one of $, $`, or $' anywhere in the program, it has to provide them for every pattern match. This may substantially slow your program. Perl uses the same mechanism to produce $1, $2, etc, so you also pay a price for each pattern that contains capturing parentheses. (To avoid this cost while retaining the grouping behaviour, use the extended regular expression (?: ... ) instead.) But if you never use $, $` or $', then patterns without capturing parentheses will not be penalized. So avoid $, $', and $` if you can, but if you can't (and some algorithms really appreciate them), once you've used them once, use them at will, because you've already paid the price. As of 5.005, $ is not so costly as the other two.

Backslashed metacharacters in Perl are alphanumeric, such as b, w, n. Unlike some other regular expression languages, there are no backslashed symbols that aren't alphanumeric. So anything that looks like \, , ),

$pattern = s/(W)/\$1/g;

(If use locale is set, then this depends on the current locale.) Today it is more common to use the quotemeta() function or the Q metaquoting escape sequence to disable all metacharacters' special meanings like this

Beware that if you put literal backslashes (those not inside interpolated variables) between Q and E, double-quotish backslash interpolation may lead to confusing results. If you need to use literal backslashes within Q...E, consult ``Gory details of parsing quoted constructs'' in perlop.

Extended Patterns

Perl also defines a consistent extension syntax for features not found in standard tools like awk and lex. The syntax is a pair of parentheses with a question mark as the first thing within the parentheses. The character after the question mark indicates the extension.

The stability of these extensions varies widely. Some have been part of the core language for many years. Others are experimental and may change without warning or be completely removed. Check the documentation on an individual feature to verify its current status.

A question mark was chosen for this and for the minimal-matching construct because 1) question marks are rare in older regular expressions, and 2) whenever you see one, you should stop and ``question'' exactly what is going on. That's psychology...


A comment. The text is ignored. If the /x modifier enables whitespace formatting, a simple # will suffice. Note that Perl closes the comment as soon as it sees a ), so there is no way to put a literal ) in the comment.


One or more embedded pattern-match modifiers. This is particularly useful for dynamic patterns, such as those read in from a configuration file, read in as an argument, are specified in a table somewhere, etc. Consider the case that some of which want to be case sensitive and some do not. The case insensitive ones need to include merely (?i)

at the front of the pattern. For example

$pattern =

  1. more flexible:

$pattern =

Letters after a - turn those modifiers off. These modifiers are localized inside an enclosing group (if any). For example,

( (?i) blah ) s+ 1

will match a repeated (including the case!) word blah in any case, assuming x modifier, and no i modifier outside this group.



This is for clustering, not capturing; it groups subexpressions like ``(), but doesn't make backreferences as ``() does. So

@fields = split(/b(?:abc)b/)

is like

@fields = split(/b(abc)b/)

but doesn't spit out extra fields. It's also cheaper not to capture characters if you don't need to.

Any letters between ? and : act as flags modifiers as with (?imsx-imsx). For example,


is equivalent to the more verbose



A zero-width positive look-ahead assertion. For example, /w+(?=t)/ matches a word followed by a tab, without including the tab in $.


A zero-width negative look-ahead assertion. For example /foo(?!bar)/ matches any occurrence of ``foo that isn't followed by ``bar. Note however that look-ahead and look-behind are NOT the same thing. You cannot use this for look-behind.

If you are looking for a ``bar that isn't preceded by a ``foo, /(?!foo)bar/ will not do what you want. That's because the (?!foo) is just saying that the next thing cannot be ``foo--and it's not, it's a ``bar, so ``foobar will match. You would have to do something like /(?!foo) for that. We say ``like because there's the case of your ``bar'' not having three characters before it. You could cover that this way: /(?:(?!foo)...^.{0,2})bar/. Sometimes it's still

easier just to say
if (/bar/

For look-behind see below.


A zero-width positive look-behind assertion. For example, /(? matches a word that follows a tab, without including the tab in $. Works only for fixed-width look-behind.


A zero-width negative look-behind assertion. For example /(? matches any occurrence of ``foo that does not follow ``bar. Works only for fixed-width look-behind.

(?{ code })

WARNING : This extended regular expression feature is considered highly experimental, and may be changed or deleted without notice.

This zero-width assertion evaluate any embedded Perl code. It always succeeds, and its code is not interpolated. Currently, the rules to determine where the code ends are somewhat convoluted.

The code is properly scoped in the following sense: If the assertion is backtracked (compare ``Backtracking''), all changes introduced after localization are undone, so that

$_ = 'a' x 8;

m will set $res = 4. Note that after the match, $cnt returns to the globally introduced value, because the scopes that restrict local operators are unwound.

This assertion may be used as a (?(condition)yes-patternno-pattern) switch. If not used in this way, the result of evaluation of code is put into the special variable $^R. This happens immediately, so $^R can be used from other (?{ code }) assertions inside the same regular expression.

The assignment to $^R above is properly localized, so the old value of $^R is restored if the assertion is backtracked; compare ``Backtracking''.

For reasons of security, this construct is forbidden if the regular expression involves run-time interpolation of variables, unless the perilous use re 'eval' pragma has been used (see re), or the variables contain results of qr// operator (see ``qr/STRING/imosx'' in perlop).

This restriction is because of the wide-spread and remarkably convenient custom of using run-time determined

strings as patterns. For example
$re =

Before Perl knew how to execute interpolated code within a pattern, this operation was completely safe from a security point of view, although it could raise an exception from an illegal pattern. If you turn on the use re 'eval', though, it is no longer secure, so you should only do so if you are also using taint checking. Better yet, use the carefully constrained evaluation within a Safe module. See perlsec for details about both these mechanisms.

(??{ code })

WARNING : This extended regular expression feature is considered highly experimental, and may be changed or deleted without notice. A simplified version of the syntax may be introduced for commonly used idioms.

This is a ``postponed'' regular subexpression. The code is evaluated at run time, at the moment this subexpression may match. The result of evaluation is considered as a regular expression and matched as if it were inserted instead of this construct.

The code is not interpolated. As before, the rules to determine where the code ends are currently somewhat convoluted.

The following pattern matches a parenthesized

$re = qr{

(?: (?


WARNING : This extended regular expression feature is considered highly experimental, and may be changed or deleted without notice.

An ``independent subexpression, one which matches the substring that a standalone pattern would match if anchored at the given position, and it matches nothing other than this substring. This construct is useful for optimizations of what would otherwise be ``eternal matches, because it will not backtrack (see ``Backtracking). It may also be useful in places where the ``grab all you can, and do not give anything back semantic is desirable.

For example: ^(? will never match, since (? (anchored at the beginning of string, as above) will match all characters a at the beginning of string, leaving no a for ab to match. In contrast, a*ab will match the same as a+b, since the match of the subgroup a* is influenced by the following group ab (see ``Backtracking''). In particular, a* inside a*ab will match fewer characters than a standalone a*, since this makes the tail match.

An effect similar to (? may be achieved by writing (?=(pattern))1. This matches the same substring as a standalone a+, and the following 1 eats the matched string; it therefore makes a zero-length assertion into an analogue of (?. (The difference between these two constructs is that the second one uses a capturing group, thus shifting ordinals of backreferences in the rest of a regular expression.)

Consider this pattern

( [^()?+ # x+ [^()?* ) )+ ) }x That will efficiently match a nonempty group with matching parentheses two levels deep or less. However, if there is no such group, it will take virtually forever on a long string. That's because there are so many different ways to split a long string into several substrings. This is what (.+)+ is doing, and (.+)+ is similar to a subpattern of the above pattern. Consider how the pattern above detects no-match on ((()aaaaaaaaaaaaaaaaaa in several seconds, but that each extra letter doubles this time. This exponential performance will make it appear that your program has hung. However, a tiny change to this pattern


( (? which uses (? matches exactly when the one above does (verifying this yourself would be a productive exercise), but finishes in a fourth the time when used on a similar string with 1000000 as. Be aware, however, that this pattern currently triggers a warning message under the use warnings pragma or -w switch saying it ):

On simple groups, such as the pattern (? , a comparable effect may be achieved by negative look-ahead, as in [^()?+ (?! [^()? ). This was only 4 times slower on a string with 1000000 as.

The ``grab all you can, and do not give anything back'' semantic is desirable in many situations where on the first sight a simple ()* looks like the correct solution. Suppose we parse text with comments being delimited by

  1. followed by some optional (horizontal)

whitespace. Contrary to its appearance, [ t* is not the correct subexpression to match the comment delimiter, because it may ``give up'' some whitespace if the remainder of the pattern can be made to match that way. The

correct answer is either one of these
For example, to grab non-empty comments into $1, one should use either one of these
/ (?

Which one you pick depends on which of these expressions better reflects the above specification of comments.



WARNING : This extended regular expression feature is considered highly experimental, and may be changed or deleted without notice.

Conditional expression. (condition) should be either an integer in parentheses (which is valid if the corresponding pair of parentheses matched), or look-ahead/look-behind/evaluate zero-width assertion.

For example
m{ ( )?

[^()?+ (?(1) ) ) }x matches a chunk of non-parentheses, possibly included in parentheses themselves.


NOTE: This section presents an abstract approximation of regular expression behavior. For a more rigorous (and complicated) view of the rules involved in selecting a match among possible alternatives, see ``Combining pieces together''.

A fundamental feature of regular expression matching involves the notion called backtracking, which is currently used (when needed) by all regular expression quantifiers, namely *, *?, +,

  • ?, {n,m}, and {n,m}?.

Backtracking is often optimized internally, but the general principle outlined here is valid.

For a regular expression to match, the entire regular expression must match, not just part of it. So if the beginning of a pattern containing a quantifier succeeds in a way that causes later parts in the pattern to fail, the matching engine backs up and recalculates the beginning part--that's why it's called backtracking.

Here is an example of backtracking: Let's say you want to find the word following ``foo'' in the string ``Food is on

the foo table.''
$_ =

When the match runs, the first part of the regular expression (b(foo)) finds a possible match right at the beginning of the string, and loads up $1 with ``Foo. However, as soon as the matching engine sees that there's no whitespace following the ``Foo that it had saved in $1, it realizes its mistake and starts over again one character after where it had the tentative match. This time it goes all the way until the next occurrence of ``foo. The complete regular expression matches this time, and you get the expected output of ``table follows foo.

Sometimes minimal matching can help a lot. Imagine you'd like to match everything between ``foo and ``bar.

Initially, you write something like this
$_ =
Which perhaps unexpectedly yields

That's because .* was greedy, so you get everything between the first ``foo and the last ``bar. Here it's more effective to use minimal matching to make sure you get the text between a ``foo and the first ``bar thereafter.

if ( /foo(.*?)bar/ ) { print

Here's another example: let's say you'd like to match a number at the end of a string, and you also want to keep the preceding part the match. So you write this
$_ =

That won't work at all, because .* was greedy and gobbled up the whole string. As d* can match on an empty string the complete regular expression matched successfully.

Beginning is

Here are some variants, most of which don't work
$_ = for $pat (@pats) {


That will print out

As you see, this can be a bit tricky. It's important to realize that a regular expression is merely a set of assertions that gives a definition of success. There may be 0, 1, or several different ways that the definition might succeed against a particular string. And if there are multiple ways it might succeed, you need to understand backtracking to know which variety of success you will achieve.

When using look-ahead assertions and negations, this can all get even tricker. Imagine you'd like to find a sequence of non-digits not followed by ``123''. You might try to write that as

$_ =

But that isn't going to match; at least, not the way you're hoping. It claims that there is no 123 in the string. Here's a clearer picture of why it that pattern matches, contrary to popular expectations
$x = 'ABC123' ;

$y = 'ABC445' ;

print print

This prints

2: got ABC

3: got AB 4: got ABC You might have expected test 3 to fail because it seems to a more general purpose version of test 1. The important difference between them is that test 3 contains a quantifier (D*) and so can use backtracking, whereas test 1 will not. What's happening is that you've asked ``Is it true that at the start of $x, following 0 or more non-digits, you have something that's not 123? If the pattern matcher had let D* expand to `` ABC , this would have caused the whole pattern to fail.

The search engine will initially match D* with `` ABC . Then it will try to match (?!123 with ``123, which fails. But because a quantifier (D*) has been used in the regular expression, the search engine can backtrack and retry the match differently in the hope of matching the complete regular expression.

The pattern really, really wants to succeed, so it uses the standard pattern back-off-and-retry and lets D* expand to just `` AB this time. Now there's indeed something following `` AB that is not ``123. It's ``C123, which suffices.

We can deal with this by using both an assertion and a negation. We'll say that the first part in $1 must be followed both by a digit and by something that's not ``123''. Remember that the look-aheads are zero-width expressions--they only look, but don't consume any of the string in their match. So rewriting this way produces what you'd expect; that is, case 5 will fail, but case 6

print 6: got ABC

In other words, the two zero-width assertions next to each other work as though they're ANDed together, just as you'd use any built-in assertions: /^$/ matches only if you're at the beginning of the line AND the end of the line simultaneously. The deeper underlying truth is that juxtaposition in regular expressions always means AND , except when you write an explicit OR using the vertical bar. /ab/ means match ``a AND (then) match ``b, although the attempted matches are made at different positions because ``a'' is not a zero-width assertion, but a one-width assertion.

WARNING : particularly complicated regular expressions can take exponential time to solve because of the immense number of possible ways they can use backtracking to try match. For example, without internal optimizations done by the regular expression engine, this

will take a painfully long time to run
'aaaaaaaaaaaa' = /((a{0,5}){0,5})*[c?/

And if you used *'s in the internal groups instead of limiting them to 0 through 5 matches, then it would take forever--or until you ran out of stack space. Moreover, these internal optimizations are not always applicable. For example, if you put {0,5} instead of * on the external group, no current optimization is applicable, and the match takes a long time to finish.

A powerful tool for optimizing such beasts is what is known as an ``independent group, which does not backtrack (see (? might have influenced the following match, see (?''

Version 8 Regular Expressions

In case you're not familiar with the ``regular'' Version 8 regex routines, here are the pattern-matching rules not described above.

Any single character matches itself, unless it is a metacharacter with a special meaning described here or above. You can cause characters that normally function as metacharacters to be interpreted literally by prefixing them with a `` (e.g., ``. matches a ``., not any character; ``\ matches a ``). A series of characters matches that series of characters in the target string, so the pattern blurfl would match ``blurfl in the target string.

You can specify a character class, by enclosing a list of characters in [?, which will match any one character from the list. If the first character after the ``

Fatal Error:

lib/CachedMarkup.php (In template 'browse' < 'body' < 'html'):257: Error: Pure virtual

lib/main.php:944: Notice: PageInfo: Cannot find action page

lib/main.php:839: Notice: PageInfo: Unknown action

Fatal PhpWiki Error

lib/CachedMarkup.php (In template 'browse' < 'body' < 'html'):257: Error: Pure virtual