Home
Main website
Display Sidebar
Hide Ads
Recent Changes
View Source:
perlfaq9(1)
Edit
PageHistory
Diff
Info
LikePages
PERLFAQ9 !!!PERLFAQ9 NAME DESCRIPTION AUTHOR AND COPYRIGHT ---- !!NAME perlfaq9 - Networking ($Revision: 1.26 $, $Date: 1999/05/23 16:08:30 $) !!DESCRIPTION This section deals with questions related to networking, the internet, and a few on the web. __My CGI script runs from the command line but not the browser. (500 Server Error)__ If you can demonstrate that you've read the following FAQs and that your problem isn't something simple that can be easily answered, you'll probably receive a courteous and useful reply to your question if you post it on comp.infosystems.www.authoring.cgi (if it's something to do with HTTP , HTML , or the CGI protocols). Questions that appear to be Perl questions but are really CGI ones that are posted to comp.lang.perl.misc may not be so well received. The useful FAQs and related documents are: CGI FAQ http://www.webthing.com/tutorials/cgifaq.html Web FAQ http://www.boutell.com/faq/ WWW Security FAQ http://www.w3.org/Security/Faq/ HTTP Spec http://www.w3.org/pub/WWW/Protocols/HTTP/ HTML Spec http://www.w3.org/TR/REC-html40/ http://www.w3.org/pub/WWW/!MarkUp/ CGI Spec http://www.w3.org/CGI/ CGI Security FAQ http://www.go2net.com/people/paulp/cgi-security/safe-cgi.txt __How can I get better error messages from a CGI program?__ Use the CGI::Carp module. It replaces warn and die, plus the normal Carp modules carp, croak, and confess functions with more verbose and safer versions. It still sends them to the normal server error log. use CGI::Carp; warn The following use of CGI::Carp also redirects errors to a file of your choice, placed in a BEGIN block to catch compile-time warnings as well: BEGIN { use CGI::Carp qw(carpout); open(LOG, You can even arrange for fatal errors to go back to the client browser, which is nice for your own debugging, but might confuse the end user. use CGI::Carp qw(fatalsToBrowser); die Even if the error happens before you get the HTTP header out, the module will try to take care of this to avoid the dreaded server 500 errors. Normal warnings still go out to the server error log (or wherever you've sent them with carpout) with the application name and date stamp prepended. __How do I remove HTML from a string?__ The most correct way (albeit not the fastest) is to use HTML::Parser from CPAN . Another mostly correct way is to use HTML::!FormatText which not only removes HTML but also attempts to do a little simple formatting of the resulting plain text. Many folks attempt a simple-minded regular expression approach, like s/, but that fails in many cases because the tags may continue over line breaks, they may contain quoted angle-brackets, or HTML comment may be present. Plus, folks forget to convert entities--like for example. Here's one ``simple-minded'' approach, that works for most files: #!/usr/bin/perl -p0777 s/ If you want a more complete solution, see the 3-stage striphtml program in http://www.perl.com/CPAN/authors/Tom_Christiansen/scripts/striphtml.gz . Here are some tricky cases that you should think about when picking a solution: If HTML comments include other tags, those solutions would also break on text like this: __How do I extract URLs?__ A quick but imperfect approach is #!/usr/bin/perl -n00 # qxurl - tchrist@perl.com print This version does not adjust relative URLs, understand alternate bases, deal with HTML comments, deal with HREF and NAME attributes in the same tag, understand extra qualifiers like TARGET , or accept URLs themselves as arguments. It also runs about 100x faster than a more ``complete'' solution using the LWP suite of modules, such as the http://www.perl.com/CPAN/authors/Tom_Christiansen/scripts/xurl.gz program. __How do I download a file from the user's machine? How do I open a file on another machine?__ In the context of an HTML form, you can use what's known as __multipart/form-data__ encoding. The CGI .pm module (available from CPAN ) supports this in the ''start_multipart_form()'' method, which isn't the same as the ''startform()'' method. __How do I make a pop-up menu in HTML ?__ Use the ____SELECT and __ __OPTION tags. The CGI .pm module (available from CPAN ) supports this widget, as well as many others, including some that it cleverly synthesizes on its own. __How do I fetch an HTML file?__ One approach, if you have the lynx text-based HTML browser installed on your system, is this: $html_code = `lynx -source $url`; $text_data = `lynx -dump $url`; The libwww-perl ( LWP ) modules from CPAN provide a more powerful way to do this. They don't require lynx, but like lynx, can still work through proxies: # simplest version use LWP::Simple; $content = get($URL); # or print HTML from a URL use LWP::Simple; getprint # or print ASCII from HTML from a URL # also need HTML-Tree package from CPAN use LWP::Simple; use HTML::Parser; use HTML::!FormatText; my ($html, $ascii); $html = get( __How do I automate an HTML form submission?__ If you're submitting values using the GET method, create a URL and encode the form using the query_form method: use LWP::Simple; use URI::URL; my $url = url('http://www.perl.com/cgi-bin/cpan_mod'); $url- If you're using the POST method, create your own user agent and encode the content appropriately. use HTTP::Request::Common qw(POST); use LWP::!UserAgent; $ua = LWP::!UserAgent- __How do I decode or create those %-encodings on the web?__ If you are writing a CGI script, you should be using the CGI .pm module that comes with perl, or some other equivalent module. The CGI module automatically decodes queries for you, and provides an ''escape()'' function to handle encoding. The best source of detailed information on URI encoding is RFC 2396. Basically, the following substitutions do it: s/([[^w()'*~!.-])/sprintf '%%%02x', $1/eg; # encode s/%([[A-Fa-fd]{2})/chr hex $1/eg; # decode However, you should only apply them to individual URI components, not the entire URI , otherwise you'll lose information and generally mess things up. If that didn't explain it, don't worry. Just go read section 2 of the RFC , it's probably the best explanation there is. RFC 2396 also contains a lot of other useful information, including a regexp for breaking any arbitrary URI into components (Appendix B). __How do I redirect to another page?__ According to RFC 2616, ``Hypertext Transfer Protocol -- HTTP/1 .1'', the preferred method is to send a Location: header instead of a Content-Type: header: Location: http://www.domain.com/newpage Note that relative URLs in these headers can cause strange effects because of ``optimizations'' that servers do. $url = To target a particular frame in a frameset, include the ``Window-target:'' in the header. print EOF To be correct to the spec, each of those virtual newlines should really be physical sequences by the time your message is received by the client browser. Except for NPH scripts, though, that local newline should get translated by your server into standard form, so you shouldn't have a problem here, even if you are stuck on MacOS. Everybody else probably won't even notice. __How do I put a password on my web pages?__ That depends. You'll need to read the documentation for your web server, or perhaps check some of the other FAQs referenced above. __How do I edit my .htpasswd and .htgroup files with Perl?__ The HTTPD::!UserAdmin and HTTPD::!GroupAdmin modules provide a consistent OO interface to these files, regardless of how they're stored. Databases may be text, dbm, Berkley DB or any database with a DBI compatible driver. HTTPD::!UserAdmin supports files used by the `Basic' and `Digest' authentication schemes. Here's an example: use HTTPD::!UserAdmin (); HTTPD::!UserAdmin - __How do I make sure users can't enter values into a form that cause my CGI script to do bad things?__ Read the CGI security FAQ , at http://www-genome.wi.mit.edu/WWW/faqs/www-security-faq.html , and the Perl/CGI FAQ at http://www.perl.com/CPAN/doc/FAQs/cgi/perl-cgi-faq.html . In brief: use tainting (see perlsec), which makes sure that data from outside your script (eg, CGI parameters) are never used in eval or system calls. In addition to tainting, never use the single-argument form of ''system()'' or ''exec()''. Instead, supply the command and arguments as a list, which prevents shell globbing. __How do I parse a mail header?__ For a quick-and-dirty solution, try this solution derived from ``split'' in perlfunc: $/ = ''; $header = That solution doesn't do well if, for example, you're trying to maintain all the Received lines. A more complete approach is to use the Mail::Header module from CPAN (part of the !MailTools package). __How do I decode a CGI form?__ You use a standard module, probably CGI .pm. Under no circumstances should you attempt to do so by hand! You'll see a lot of CGI programs that blindly read from STDIN the number of bytes equal to CONTENT_LENGTH for POSTs, or grab QUERY_STRING for decoding GETs. These programs are very poorly written. They only work sometimes. They typically forget to check the return value of the ''read()'' system call, which is a cardinal sin. They don't handle HEAD requests. They don't handle multipart forms used for file uploads. They don't deal with GET/POST combinations where query fields are in more than one place. They don't deal with keywords in the query string. In short, they're bad hacks. Resist them at all costs. Please do not be tempted to reinvent the wheel. Instead, use the CGI .pm or CGI_Lite.pm (available from CPAN ), or if you're trapped in the module-free land of perl1 .. perl4, you might look into cgi-lib.pl (available from http://cgi-lib.stanford.edu/cgi-lib/ ). Make sure you know whether to use a GET or a POST in your form. GETs should only be used for something that doesn't update the server. Otherwise you can get mangled databases and repeated feedback mail messages. The fancy word for this is ``idempotency''. This simply means that there should be no difference between making a GET request for a particular URL once or multiple times. This is because the HTTP protocol definition says that a GET request may be cached by the browser, or server, or an intervening proxy. POST requests cannot be cached, because each request is independent and matters. Typically, POST requests change or depend on state on the server (query or update a database, send mail, or purchase a computer). __How do I check a valid mail address?__ You can't, at least, not in real time. Bummer, eh? Without sending mail to the address and seeing whether there's a human on the other hand to answer you, you cannot determine whether a mail address is valid. Even if you apply the mail header standard, you can have problems, because there are deliverable addresses that aren't RFC-822 (the mail header standard) compliant, and addresses that aren't deliverable which are compliant. Many are tempted to try to eliminate many frequently-invalid mail addresses with a simple regex, such as /^[[w.-]+@(?:[[w-]+.)+w+$/. It's a very bad idea. However, this also throws out many valid ones, and says nothing about potential deliverability, so it is not suggested. Instead, see http://www.perl.com/CPAN/authors/Tom_Christiansen/scripts/ckaddr.gz, which actually checks against the full RFC spec (except for nested comments), looks for addresses you may not wish to accept mail to (say, Bill Clinton or your postmaster), and then makes sure that the hostname given can be looked up in the DNS MX records. It's not fast, but it works for what it tries to do. Our best advice for verifying a person's mail address is to have them enter their address twice, just as you normally do to change a password. This usually weeds out typos. If both versions match, send mail to that address with a personal message that looks somewhat like: Dear someuser@host.com, Please confirm the mail address you gave us Wed May 6 09:38:41 MDT 1998 by replying to this message. Include the string If you get the message back and they've followed your directions, you can be reasonably assured that it's real. A related strategy that's less open to forgery is to give them a PIN (personal ID number). Record the address and PIN (best that it be a random one) for later processing. In the mail you send, ask them to include the PIN in their reply. But if it bounces, or the message is included via a ``vacation'' script, it'll be there anyway. So it's best to ask them to mail back a slight alteration of the PIN , such as with the characters reversed, one added or subtracted to each digit, etc. __How do I decode a MIME/BASE64 string?__ The MIME-Base64 package (available from CPAN ) handles this as well as the MIME/QP encoding. Decoding BASE64 becomes as simple as: use MIME::Base64; $decoded = decode_base64($encoded); The MIME-Tools package (available from CPAN ) supports extraction with decoding of BASE64 encoded attachments and content directly from email messages. If the string to decode is short (less than 84 bytes long) a more direct approach is to use the ''unpack()'' function's ``u'' format after minor transliterations: tr#A-Za-z0-9+/##cd; # remove non-base64 chars tr#A-Za-z0-9+/# -_#; # convert to uuencoded format $len = pack( __How do I return the user's mail address?__ On systems that support getpwuid, the $ use Sys::Hostname; $address = sprintf('%s@%s', scalar getpwuid($ Company policies on mail address can mean that this generates addresses that the company's mail system will not accept, so you should ask for users' mail addresses when this matters. Furthermore, not all systems on which Perl runs are so forthcoming with this information as is Unix. The Mail::Util module from CPAN (part of the !MailTools package) provides a ''mailaddress()'' function that tries to guess the mail address of the user. It makes a more intelligent guess than the code above, using information given when the module was installed, but it could still be incorrect. Again, the best way is often just to ask the user. __How do I send mail?__ Use the sendmail program directly: open(SENDMAIL, Body of the message goes here after the blank line in as many lines as you like. EOF close(SENDMAIL) or warn The __-oi__ option prevents sendmail from interpreting a line consisting of a single dot as ``end of message''. The __-t__ option says to use the headers to decide who to send the message to, and __-odq__ says to put the message into the queue. This last option means your message won't be immediately delivered, so leave it out if you want immediate delivery. Alternate, less convenient approaches include calling mail (sometimes called mailx) directly or simply opening up port 25 have having an intimate conversation between just you and the remote SMTP daemon, probably sendmail. Or you might be able use the CPAN module Mail::Mailer: use Mail::Mailer; $mailer = Mail::Mailer- The Mail::Internet module uses Net::SMTP which is less Unix-centric than Mail::Mailer, but less reliable. Avoid raw SMTP commands. There are many reasons to use a mail transport agent like sendmail. These include queueing, MX records, and security. __How do I use MIME to make an attachment to a mail message?__ This answer is extracted directly from the MIME::Lite documentation. Create a multipart message (i.e., one with attachments). use MIME::Lite; ### Create a new multipart message: $msg = MIME::Lite- ### Add parts (each $text = $msg- MIME::Lite also includes a method for sending these things. $msg- This defaults to using sendmail(1) but can be customized to use SMTP via Net::SMTP. __How do I read mail?__ While you could use the Mail::Folder module from CPAN (part of the !MailFolder package) or the Mail::Internet module from CPAN (also part of the !MailTools package), often a module is overkill. Here's a mail sorter. #!/usr/bin/perl # bysub1 - simple sort by subject my(@msgs, @sub); my $msgno = -1; $/ = ''; # paragraph reads while ( Or more succinctly, #!/usr/bin/perl -n00 # bysub2 - awkish sort-by-subject BEGIN { $msgno = -1 } $sub[[++$msgno] = (/^Subject:s*(?:Re:s*)*(.*)/mi)[[0] if /^From/m; $msg[[$msgno] .= $_; END { print @msg[[ sort { $sub[[$a] cmp $sub[[$b] $a __How do I find out my hostname/domainname/IP address?__ The normal way to find your own hostname is to call the `hostname` program. While sometimes expedient, this has some problems, such as not knowing whether you've got the canonical name or not. It's one of those tradeoffs of convenience versus portability. The Sys::Hostname module (part of the standard perl distribution) will give you the hostname after which you can find out the IP address (assuming you have working DNS ) with a ''gethostbyname()'' call. use Socket; use Sys::Hostname; my $host = hostname(); my $addr = inet_ntoa(scalar gethostbyname($host 'localhost')); Probably the simplest way to learn your DNS domain name is to grok it out of /etc/resolv.conf, at least under Unix. Of course, this assumes several things about your resolv.conf configuration, including that it exists. (We still need a good DNS domain name-learning method for non-Unix systems.) __How do I fetch a news article or the active newsgroups?__ Use the Net::NNTP or News::NNTPClient modules, both available from CPAN . This can make tasks like fetching the newsgroup list as simple as perl -MNews::NNTPClient -e 'print News::NNTPClient- __How do I fetch/put an FTP file?__ LWP::Simple (available from CPAN ) can fetch but not put. Net::FTP (also available from CPAN ) is more complex but can put as well as fetch. __How can I do RPC in Perl?__ A DCE::RPC module is being developed (but is not yet available) and will be released as part of the DCE-Perl package (available from CPAN ). The rpcgen suite, available from CPAN/authors/id/JAKE/, is an RPC stub generator and includes an RPC::ONC module. !!AUTHOR AND COPYRIGHT Copyright (c) 1997-1999 Tom Christiansen and Nathan Torkington. All rights reserved. When included as part of the Standard Version of Perl, or as part of its complete documentation whether printed or otherwise, this work may be distributed only under the terms of Perl's Artistic License. Any distribution of this file or derivatives thereof ''outside'' of that package require that special arrangements be made with copyright holder. Irrespective of its distribution, all code examples in this file are hereby placed into the public domain. You are permitted and encouraged to use this code in your own programs for fun or for profit as you see fit. A simple comment in the code giving credit would be courteous but is not required. ----
One page links to
perlfaq9(1)
:
Man1p
This page is a man page (or other imported legacy content). We are unable to automatically determine the license status of this page.
