Home
Main website
Display Sidebar
Hide Ads
Recent Changes
View Source:
ospfd.conf
Edit
PageHistory
Diff
Info
LikePages
Sample ospfd.conf hostname hostname(1) ! IMPORTANT: Please leave vty password as metanet password metanet enable password !YourEnablePassword log file /var/log/zebra/ospfd.log ! interface lo ! interface eth0 ! ! use tap0 for ETHERTAP, wan0 for TUN interface tap0 ! interface wan0 ip ospf hello-interval 30 ip ospf dead-interval 120 ip ospf retransmit-interval 15 ! interface sit0 ! interface ppp0 ! router ospf ospf router-id <eth0 ip address> passive-interface eth0 network <Internal Network Range>/<netmask>[1] area <areanum> ! area is calculated by the two middle ip components - eg, ! for network 10.66.1.0/24 ! 66 and 1 - padding with 0's to three digits each 066001 ! and dropping leading 0's network 192.168.0.0/16 area 0 !REQUIRED. DO NOT CHANGE !smux peer .1.3.6.1.4.1.3317.1.2.5 ! not sure if smux is necessary, mine works without it even though I spend hours trying to get it working ! smux -- snmp multiplexor, requires snmp running on your server, allows you to query the routing daemon using snmp (I believe) line vty ! allows you to configure ospfd via a telnet connection to localhost on port 2604 (ospfd), requires password set [1] This must be in the form: x.x.x.x/x - e.g. 10.3.1.0/24
No page links to
ospfd.conf
.