groff -Tascii -man file ...
groff -Tps -man file ...
This manual page explains the groff tmac.an macro package (often called the man macro package) and related conventions for creating manual (man) pages. This macro package should be used by developers when writing or porting man pages for Linux. It is fairly compatible with other versions of this macro package, so porting man pages should not be a major problem (exceptions include the NET-2 BSD release, which uses a totally different macro package called mdoc; see mdoc(7)).
The first command in a man page (after comment lines) should be
.TH title section date source manual,
The title of the man page (e.g., MAN).
The section number the man page should be placed in (e.g., 7).
The date of the last revision--remember to change this every time a change is made to the man page, since this is the most general way of doing version control.
The source of the command.
For binaries, use something like: GNU, NET-2, SLS Distribution, MCC Distribution.
For system calls, use the version of the kernel that you are currently looking at: Linux 0.99.11.
For library calls, use the source of the function: GNU, BSD 4.3, Linux DLL 4.4.1.
The title of the manual (e.g., Linux Programmer's Manual).
Note that BSD mdoc-formatted pages begin with the Dd command, not the TH command.
The manual sections are traditionally defined as follows:
Those commands that can be executed by the user from within a shell.
2 System calls
Those functions which must be performed by the kernel.
3 Library calls
Most of the libc functions, such as qsort(3))
4 Special files
Files found in /dev)
5 File formats and conventions
The format for /etc/passwd and other human-readable files.
7 Macro packages and conventions
A description of the standard file system layout, network protocols, ASCII and other character codes, this man page, and other things.
8 System management commands
Commands like mount(8), many of which only root can execute.
9 Kernel routines
Sections are started with .SH followed by the heading name. If the name contains spaces and appears on the same line as .SH, then place the heading in double quotes. Traditional or suggested headings include: NAME, SYNOPSIS, DESCRIPTION, RETURN VALUE, EXIT STATUS, ERROR HANDLING, ERRORS, OPTIONS, USAGE, FILES, ENVIRONMENT, DIAGNOSTICS, SECURITY, CONFORMING TO, NOTES, BUGS, AUTHOR, and SEE ALSO. Where a traditional heading would apply, please use it; this kind of consistency can make the information easier to understand. However, feel free to create your own headings if they make things easier to understand. The only required heading is NAME, which should be the first section and be followed on the next line by a one line description of the program:
.SH NAME chess - the game of chess
It is extremely important that this format is followed, and that there is a backslash before the single dash which follows the command name. This syntax is used by the makewhatis(8)? or mandb(8) programs to create a database of short command descriptions for the whatis(1) and apropos(1) commands.
Some other traditional sections have the following contents:
briefly describes the command or function's interface. For commands, this shows the syntax of the command and its arguments (including options); boldface is used for as-is text and italics are used to indicate replaceable arguments. Brackets ([?) surround optional arguments, vertical bars (|) separate choices, and ellipses (...) can be repeated. For functions, it shows any required data declarations or #include directives, followed by the function declaration.
gives an explanation of what the command, function, or format does. Discuss how it interacts with files and standard input, and what it produces on standard output or standard error. Omit internals and implementation details unless they're critical for understanding the interface. Describe the usual case; for information on options use the OPTIONS section. If there is some kind of input grammar or complex set of subcommands, consider describing them in a separate USAGE section (and just place an overview in the DESCRIPTION section).
gives a list of the values the library routine will return to the caller and the conditions that cause these values to be returned.
lists the possible exit status values or a program and the conditions that cause these values to be returned.
describes the options accepted by the program and how they change its behavior.
USAGE describes the grammar of any sublanguage this implements.
FILES lists the files the program or function uses, such as configuration files, startup files, and files the program directly operates on. Give the full pathname of these files, and use the installation process to modify the directory part to match user preferences. For many programs, the default installation location is in /usr/local, so your base manual page should use /usr/local as the base.
lists all environment variables that affect your program or function and how they affect it.
gives an overview of the most common error messages and how to cope with them. You don't need to explain system error messages or fatal signals that can appear during execution of any program unless they're special in some way to your program.
discusses security issues and implications. Warn about configurations or environments that should be avoided, commands that may have security implications, and so on, especially if they aren't obvious. Discussing security in a separate section isn't necessary; if it's easier to understand, place security information in the other sections (such as the DESCRIPTION or USAGE section). However, please include security information somewhere!
describes any standards or conventions this implements.
NOTES provides miscellaneous notes.
BUGS lists limitations, known defects or inconveniences, and other questionable activities.
AUTHOR lists authors of the documentation or program so you can mail in bug reports.
Although there are many arbitrary conventions for man pages in the UNIX world, the existence of several hundred Linux-specific man pages defines our font standards:
For functions, the arguments are always specified using italics, even in the SYNOPSIS section, where the rest of the function is specified in bold: int myfunction(int argc, char **argv);
Filenames are always in italics (e.g., /usr/include/stdio.h), except in the SYNOPSIS section, where included files are in bold (e.g., #include ).
Special macros, which are usually in upper case, are in bold (e.g., MAXINT).
When enumerating a list of error codes, the codes are in bold (this list usually uses the .TP macro).
Any reference to another man page (or to the subject of the current man page) is in bold. If the manual section number is given, it is given in Roman (normal) font, without any spaces (e.g., man(7)).
The commands to select the type face are:
Bold alternating with italics (especially useful for function specifications)
Bold alternating with Roman (especially useful for referring to other manual pages)
Italics alternating with bold
Italics alternating with Roman
Roman alternating with bold
Roman alternating with italics
Small alternating with bold
Small (useful for acronyms)
Below are other relevant macros and predefined strings. Unless noted otherwise, all macros cause a break (end the current line of text). Many of these macros set or use the i below; macros may omit i'' in which case the current prevailing indent will be used. As a result, successive indented paragraphs can use the same indent without re-specifying the indent value. A normal (non-indented) paragraph resets the prevailing indent value to its default value (0.5 inches). By default a given indent is measured in ens; try to ens or ems as units for indents, since these will automatically adjust to font size changes. The other key macro definitions are:
Same as .PP (begin a new paragraph).
Same as .PP (begin a new paragraph).
Begin a new paragraph and reset prevailing indent.
Relative Margin Indent
Start relative margin indent - moves the left margin i to the right (if i is omitted, the prevailing indent value is used). A new prevailing indent is set to 0.5 inches. As a result, all following paragraph(s) will be indented until the corresponding .RE.
End relative margin indent and restores the previous value of the prevailing indent.
Indented Paragraph Macros
Begin paragraph with a hanging indent (the first line of the paragraph is at the left margin of normal paragraphs, and the rest of the paragraph's lines are indented).
.IP x i
Indented paragraph with optional hanging tag. If the tag x is omitted, the entire following paragraph is indented by i. If the tag x is provided, it is hung at the left margin before the following indented paragraph (this is just like .TP except the tag is included with the command instead of being on the following line). If the tag is too long, the text after the tag will be moved down to the next line (text will not be lost or garbled). For bulleted lists, use this macro with (bullet) or (em dash) as the tag, and for numbered lists, use the number or letter followed by a period as the tag; this simplifies translation to other formats.
Begin paragraph with hanging tag. The tag is given on the next line, but its results are like those of the .IP command.
Hypertext Link Macros
Begins a hypertext link to the URI (URL) u; it will end with the corresponding UE command. When generating HTML this should translate into the HTML command u. There is an exception: if u is the special value ''UE (this permits disabling hypertext links in phrases like !LALR(1)? when linking is not appropriate). These hypertext link
Ends the corresponding UR command; when generating HTML this should translate into .
Creates a named hypertext location named u; do not include a corresponding UE command. When generating HTML this should translate into the HTML command u u (the __
Reset tabs to default tab values (every 0.5 inches); does not cause a break.
Inserts index information (for a search system or printed index list). Index information is not normally displayed in the page itself. If followed by a single parameter, the parameter is added as a standalone index term pointing to this location in the man page. If it's two parameters, it's probably in Perl manpage format; the first parameter identifies the type of name (one of Name, Title, Header, Subsection, or Item) and the second parameter the name itself to be indexed. Otherwise, it's in the long index format: each parameter gives an index term, subordinate index term, subsubordinate index term, and so on until terminated by an empty parameter, then a parameter with the name of the program, em, and short description; this may be followed by another empty parameter and possibly by page control messages (e.g. PAGE START). An example of this would be
Set inter-paragraph vertical distance to d (if omitted, d=0.4v); does not cause a break.
Subheading t (like .SH, but used for a subsection inside a section).
The man package has the following predefined strings:
Change to default font size
Trademark Symbol: (TM)
Left angled doublequote: ``
Although technically man is a troff macro package, in reality a large number of other tools process man page files that don't implement all of troff's abilities. Thus, it's best to avoid some of troff's more exotic abilities where possible to permit these other tools to work correctly. Avoid using the various troff preprocessors (if you must, go ahead and use tbl(1), but try to use the IP and TP commands instead for two-column tables). Avoid using computations; most other tools can't process them. Use simple commands that are easy to translate to other formats. The following troff macros are believed to be safe (though in many cases they will be ignored by translators): , ., ad, bp, br, ce, de, ds, el, ie, if, fi, ft, hy, ig, in, na, ne, nf, nh, ps, so, sp, ti, tr.
You may also use many troff escape sequences (those sequences beginning with ). When you need to include the backslash character as normal text, use e. Other sequences you may use, where x or xx are any characters and N is any digit, include: ', `, -, ., , %, *x, *(xx, , $N, nx, n(xx, fx, and f(xx. Avoid using the escape sequences for drawing graphics.
Do not use the optional parameter for bp (break page). Use only positive values for sp (vertical space). Don't define a macro (de) with the same name as a macro in this or the mdoc macro package with a different meaning; it's likely that such redefinitions will be ignored. Every positive indent (in) should be paired with a matching negative indent (although you should be using the RS and RE macros instead). The condition test (if,ie) should only have 't' or 'n' as the condition. Only translations (tr) that can be ignored should be used. Font changes (ft and the f escape sequence) should only have the values 1, 2, 3, 4, R, I, B, P, or CW (the ft command may also have no parameters).
By all means include full URLs (or URIs) in the text itself; some tools such as man2html(1)? can automatically turn them into hypertext links. You can also use the new UR macro to identify links to related information. If you include URLs, use the full URL (e.g., __
Tools processing these files should open the file and examine the first non-whitespace character. A period (.) or single quote (') at the beginning of a line indicates a troff-based file (such as man or mdoc). A left angle bracket (
Many man pages begin with ' tbl__(1)?, and Linux can detect that automatically. However, you might want to include this information so your man page can be handled by other (less capable) systems. Here are the definitions of the preprocessors invoked by these characters:
Most of the macros describe formatting (e.g., font type and spacing) instead of marking semantic content (e.g., this text is a reference to another page), compared to formats like mdoc and !DocBook (even HTML has more semantic markings). This situation makes it harder to vary the man format for different media, to make the formatting consistent for a given media, and to automatically insert cross-references. By sticking to the safe subset described above, it should be easier to automate transitioning to a different reference page format in the future.
James Clark (firstname.lastname@example.org) wrote the implementation of the macro package.
Rickard E. Faith (email@example.com) wrote the initial version of this manual page.
Jens Schweikhardt (firstname.lastname@example.org) wrote the Linux Man-Page Mini-HOWTO (which influenced this manual page).