Penguin

PCRE

PCRE

NAME REGULAR EXPRESSION DETAILS BACKSLASH CIRCUMFLEX AND DOLLAR FULL STOP (PERIOD, DOT) SQUARE BRACKETS POSIX CHARACTER CLASSES VERTICAL BAR INTERNAL OPTION SETTING SUBPATTERNS REPETITION BACK REFERENCES ASSERTIONS ONCE-ONLY SUBPATTERNS CONDITIONAL SUBPATTERNS COMMENTS RECURSIVE PATTERNS PERFORMANCE UTF-8 SUPPORT DIFFERENCES FROM PERL AUTHOR


NAME

pcre - Perl-compatible regular expressions: expresion syntax.

REGULAR EXPRESSION DETAILS

The syntax and semantics of the regular expressions supported by PCRE are described below. Regular expressions are also described in the Perl documentation and in a number of other books, some of which have copious examples. Jeffrey Friedl's

The description here is intended as reference documentation. The basic operation of PCRE is on strings of bytes. However, there is the beginnings of some support for UTF-8 character strings. To use this support you must configure PCRE to include it, and then call pcre_compile() with the PCRE_UTF8 option. How this affects the pattern matching is described in the final section of this document.

A regular expression is a pattern that is matched against a subject string from left to right. Most characters stand for themselves in a pattern, and match the corresponding characters in the subject. As a trivial example, the pattern

The quick brown fox

matches a portion of a subject string that is identical to itself. The power of regular expressions comes from the ability to include alternatives and repetitions in the pattern. These are encoded in the pattern by the use of meta-characters, which do not stand for themselves but instead are interpreted in some special way.

There are two different sets of meta-characters: those that are recognized anywhere in the pattern except within square brackets, and those that are recognized in square brackets. Outside square brackets, the meta-characters are as follows:

\ general escape character with several uses ^ assert start of subject (or line, in multiline mode) $ assert end of subject (or line, in multiline mode) . match any character except newline (by default) [[ start character class definition | start of alternative branch ( start subpattern ) end subpattern ? extends the meaning of ( also 0 or 1 quantifier also quantifier minimizer * 0 or more quantifier

  • 1 or more quantifier { start min/max

quantifier

Part of a pattern that is in square brackets is called a

\ general escape character ^ negate the class, but only if the first character - indicates character range ] terminates the character class

The following sections describe the use of each of the meta-characters.

BACKSLASH

The backslash character has several uses. Firstly, if it is followed by a non-alphameric character, it takes away any special meaning that character may have. This use of backslash as an escape character applies both inside and outside character classes.

For example, if you want to match a

If a pattern is compiled with the PCRE_EXTENDED option, whitespace in the pattern (other than in a character class) and characters between a

A second use of backslash provides a way of encoding non-printing characters in patterns in a visible manner. There is no restriction on the appearance of non-printing characters, apart from the binary zero that terminates a pattern, but when a pattern is being prepared by text editing, it is usually easier to use one of the following escape sequences than the binary character it represents:

a alarm, that is, the BEL character (hex 07) cx

The precise effect of

After

After

The handling of a backslash followed by a digit other than 0 is complicated. Outside a character class, PCRE reads it and any following digits as a decimal number. If the number is less than 10, or if there have been at least that many previous capturing left parentheses in the expression, the entire sequence is taken as a back reference. A description of how this works is given later, following the discussion of parenthesized subpatterns.

Inside a character class, or if the decimal number is greater than 9 and there have not been that many capturing subpatterns, PCRE re-reads up to three octal digits following the backslash, and generates a single byte from the least significant 8 bits of the value. Any subsequent digits stand for themselves. For example:

040 is another way of writing a space 40 is the same, provided there are fewer than 40 previous capturing subpatterns 7 is always a back reference 11 might be a back reference, or another way of writing a tab 011 is always a tab 0113 is a tab followed by the character

Note that octal values of 100 or greater must not be introduced by a leading zero, because no more than three octal digits are ever read.

All the sequences that define a single byte value can be used both inside and outside character classes. In addition, inside a character class, the sequence

The third use of backslash is for specifying generic character types:

d any decimal digit D any character that is not a decimal digit s any whitespace character S any character that is not a whitespace character w any

Each pair of escape sequences partitions the complete set of characters into two disjoint sets. Any given character matches one, and only one, of each pair.

A

These character type sequences can appear both inside and outside character classes. They each match one character of the appropriate type. If the current matching point is at the end of the subject string, all of them fail, since there is no character to match.

The fourth use of backslash is for certain simple assertions. An assertion specifies a condition that has to be met at a particular point in a match, without consuming any characters from the subject string. The use of subpatterns for more complicated assertions is described below. The backslashed assertions are

b word boundary B not a word boundary A start of subject (independent of multiline mode) Z end of subject or newline at end (independent of multiline mode) z end of subject (independent of multiline mode)

These assertions may not appear in character classes (but note that

A word boundary is a position in the subject string where the current character and the previous character do not both match w or W (i.e. one matches w and the other matches W), or the start or end of the string if the first or last character matches w, respectively.

The A, Z, and z assertions differ from the traditional circumflex and dollar (described below) in that they only ever match at the very start and end of the subject string, whatever options are set. They are not affected by the PCRE_NOTBOL or PCRE_NOTEOL options. If the startoffset argument of pcre_exec() is non-zero, A can never match. The difference between Z and z is that Z matches before a newline that is the last character of the string as well as at the end of the string, whereas z matches only at the end.

CIRCUMFLEX AND DOLLAR

Outside a character class, in the default matching mode, the circumflex character is an assertion which is true only if the current matching point is at the start of the subject string. If the startoffset argument of pcre_exec() is non-zero, circumflex can never match. Inside a character class, circumflex has an entirely different meaning (see below).

Circumflex need not be the first character of the pattern if a number of alternatives are involved, but it should be the first thing in each alternative in which it appears if the pattern is ever to match that branch. If all possible alternatives start with a circumflex, that is, if the pattern is constrained to match only at the start of the subject, it is said to be an

A dollar character is an assertion which is true only if the current matching point is at the end of the subject string, or immediately before a newline character that is the last character in the string (by default). Dollar need not be the last character of the pattern if a number of alternatives are involved, but it should be the last item in any branch in which it appears. Dollar has no special meaning in a character class.

The meaning of dollar can be changed so that it matches only at the very end of the string, by setting the PCRE_DOLLAR_ENDONLY option at compile or matching time. This does not affect the Z assertion.

The meanings of the circumflex and dollar characters are changed if the PCRE_MULTILINE option is set. When this is the case, they match immediately after and immediately before an internal startoffset'' argument of pcre_exec() is non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is set.

Note that the sequences A, Z, and z can be used to match the start and end of the subject in both modes, and if all branches of a pattern start with A is it always anchored, whether PCRE_MULTILINE is set or not.

FULL STOP (PERIOD, DOT)

Outside a character class, a dot in the pattern matches any one character in the subject, including a non-printing character, but not (by default) newline. If the PCRE_DOTALL option is set, dots match newlines as well. The handling of dot is entirely independent of the handling of circumflex and dollar, the only relationship being that they both involve newline characters. Dot has no special meaning in a character class.

SQUARE BRACKETS

An opening square bracket introduces a character class, terminated by a closing square bracket. A closing square bracket on its own is not special. If a closing square bracket is required as a member of the class, it should be the first data character in the class (after an initial circumflex, if present) or escaped with a backslash.

A character class matches a single character in the subject; the character must be in the set of characters defined by the class, unless the first character in the class is a circumflex, in which case the subject character must not be in the set defined by the class. If a circumflex is actually required as a member of the class, ensure it is not the first character, or escape it with a backslash.

For example, the character class [aeiou? matches any lower case vowel, while [^aeiou? matches any character that is not a lower case vowel. Note that a circumflex is just a convenient notation for specifying the characters which are in the class by enumerating those that are not. It is not an assertion: it still consumes a character from the subject string, and fails if the current pointer is at the end of the string.

When caseless matching is set, any letters in a class represent both their upper case and lower case versions, so for example, a caseless [aeiou? matches

The newline character is never treated in any special way in character classes, whatever the setting of the PCRE_DOTALL or PCRE_MULTILINE options is. A class such as [^a? will always match a newline.

The minus (hyphen) character can be used to specify a range of characters in a character class. For example, [d-m? matches any letter between d and m, inclusive. If a minus character is required in a class, it must be escaped with a backslash or appear in a position where it cannot be interpreted as indicating a range, typically as the first or last character in the class.

It is not possible to have the literal character

Ranges operate in ASCII collating sequence. They can also be used for characters specified numerically, for example [000-037?. If a range that includes letters is used when caseless matching is set, it matches the letters in either case. For example, [W-c? is equivalent to [?[^_`wxyzabc?, matched caselessly, and if character tables for the

The character types d, D, s, S, w, and W may also appear in a character class, and add the characters that they match to the class. For example, [dABCDEF? matches any hexadecimal digit. A circumflex can conveniently be used with the upper case character types to specify a more restricted set of characters than the matching lower case type. For example, the class [^W_? matches any letter or digit, but not underscore.

All non-alphameric characters other than , -, ^ (at the start) and the terminating ] are non-special in character classes, but it does no harm if they are escaped.

POSIX CHARACTER CLASSES

Perl 5.6 (not yet released at the time of writing) is going to support the POSIX notation for character classes, which uses names enclosed by and :? within the enclosing square brackets. PCRE supports this notation. For example,

alpha:?%]

matches

alnum letters and digits alpha letters ascii character codes 0 - 127 cntrl control characters digit decimal digits (same as d) graph printing characters, excluding space lower lower case letters print printing characters, including space punct printing characters, excluding letters and digits space white space (same as s) upper upper case letters word

The names

^digit:?]

matches

VERTICAL BAR

Vertical bar characters are used to separate alternative patterns. For example, the pattern

gilbert|sullivan

matches either

INTERNAL OPTION SETTING

The settings of PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and PCRE_EXTENDED can be changed from within the pattern by a sequence of Perl option letters enclosed between

i for PCRE_CASELESS m for PCRE_MULTILINE s for PCRE_DOTALL x for PCRE_EXTENDED

For example, (?im) sets caseless, multiline matching. It is also possible to unset these options by preceding the letter with a hyphen, and a combined setting and unsetting such as (?im-sx), which sets PCRE_CASELESS and PCRE_MULTILINE while unsetting PCRE_DOTALL and PCRE_EXTENDED, is also permitted. If a letter appears both before and after the hyphen, the option is unset.

The scope of these option changes depends on where in the pattern the setting occurs. For settings that are outside any subpattern (defined below), the effect is the same as if the options were set or unset at the start of matching. The following patterns all behave in exactly the same way:

(?i)abc a(?i)bc ab(?i)c abc(?i)

which in turn is the same as compiling the pattern abc with PCRE_CASELESS set. In other words, such

If an option change occurs inside a subpattern, the effect is different. This is a change of behaviour in Perl 5.005. An option change inside a subpattern affects only that part of the subpattern that follows it, so

(a(?i)b)c

matches abc and aBc and no other strings (assuming PCRE_CASELESS is not used). By this means, options can be made to have different settings in different parts of the pattern. Any changes made in one alternative do carry on into subsequent branches within the same subpattern. For example,

(a(?i)b|c)

matches

The PCRE-specific options PCRE_UNGREEDY and PCRE_EXTRA can be changed in the same way as the Perl-compatible options by using the characters U and X respectively. The (?X) flag setting is special in that it must always occur earlier in the pattern than any of the additional features it turns on, even when it is at top level. It is best put at the start.

SUBPATTERNS

Subpatterns are delimited by parentheses (round brackets), which can be nested. Marking part of a pattern as a subpattern does two things:

1. It localizes a set of alternatives. For example, the pattern

cat(aract|erpillar|)

matches one of the words

2. It sets up the subpattern as a capturing subpattern (as defined above). When the whole pattern matches, that portion of the subject string that matched the subpattern is passed back to the caller via the ovector argument of pcre_exec(). Opening parentheses are counted from left to right (starting from 1) to obtain the numbers of the capturing subpatterns.

For example, if the string

the ((red|white) (king|queen))

the captured substrings are

The fact that plain parentheses fulfil two functions is not always helpful. There are often times when a grouping subpattern is required without a capturing requirement. If an opening parenthesis is followed by

the ((?:red|white) (king|queen))

the captured substrings are

As a convenient shorthand, if any option settings are required at the start of a non-capturing subpattern, the option letters may appear between the

(?i:saturday|sunday) (?:(?i)saturday|sunday)

match exactly the same set of strings. Because alternative branches are tried from left to right, and options are not reset until the end of the subpattern is reached, an option setting in one branch does affect subsequent branches, so the above patterns match

REPETITION

Repetition is specified by quantifiers, which can follow any of the following items:

a single character, possibly escaped the . metacharacter a character class a back reference (see next section) a parenthesized subpattern (unless it is an assertion - see below)

The general repetition quantifier specifies a minimum and maximum number of permitted matches, by giving the two numbers in curly brackets (braces), separated by a comma. The numbers must be less than 65536, and the first must be less than or equal to the second. For example:

z{2,4}

matches

[aeiou?{3,}

matches at least 3 successive vowels, but may match many more, while

d{8}

matches exactly 8 digits. An opening curly bracket that appears in a position where a quantifier is not allowed, or one that does not match the syntax of a quantifier, is taken as a literal character. For example, {,6} is not a quantifier, but a literal string of four characters.

The quantifier {0} is permitted, causing the expression to behave as if the previous item and the quantifier were not present.

For convenience (and historical compatibility) the three most common quantifiers have single-character abbreviations:

  • is equivalent to {0,} + is equivalent to {1,} ? is

equivalent to {0,1}

It is possible to construct infinite loops by following a subpattern that can match no characters with a quantifier that has no upper limit, for example:

(a?)*

Earlier versions of Perl and PCRE used to give an error at compile time for such patterns. However, because there are cases where this can be useful, such patterns are now accepted, but if any repetition of the subpattern does in fact match no characters, the loop is forcibly broken.

By default, the quantifiers are

/*.**/

to the string

/* first command / not comment / second comment

  • /

fails, because it matches the entire string due to the greediness of the .* item.

However, if a quantifier is followed by a question mark, it ceases to be greedy, and instead matches the minimum number of times possible, so the pattern

/.?*/

does the right thing with the C comments. The meaning of the various quantifiers is not otherwise changed, just the preferred number of matches. Do not confuse this use of question mark with its use as a quantifier in its own right. Because it has two uses, it can sometimes appear doubled, as in

d??d

which matches one digit by preference, but can match two if that is the only way the rest of the pattern matches.

If the PCRE_UNGREEDY option is set (an option which is not available in Perl), the quantifiers are not greedy by default, but individual ones can be made greedy by following them with a question mark. In other words, it inverts the default behaviour.

When a parenthesized subpattern is quantified with a minimum repeat count that is greater than 1 or with a limited maximum, more store is required for the compiled pattern, in proportion to the size of the minimum or maximum.

If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equivalent to Perl's /s) is set, thus allowing the . to match newlines, the pattern is implicitly anchored, because whatever follows will be tried against every character position in the subject string, so there is no point in retrying the overall match at any position after the first. PCRE treats such a pattern as though it were preceded by A. In cases where it is known that the subject string contains no newlines, it is worth setting PCRE_DOTALL when the pattern begins with .* in order to obtain this optimization, or alternatively using ^ to indicate anchoring explicitly.

When a capturing subpattern is repeated, the value captured is the substring that matched the final iteration. For example, after

(tweedle[dume?{3}s*)+

has matched

/(a|(b))+/

matches

BACK REFERENCES

Outside a character class, a backslash followed by a digit greater than 0 (and possibly further digits) is a back reference to a capturing subpattern earlier (i.e. to its left) in the pattern, provided there have been that many previous capturing left parentheses.

However, if the decimal number following the backslash is less than 10, it is always taken as a back reference, and causes an error only if there are not that many capturing left parentheses in the entire pattern. In other words, the parentheses that are referenced need not be to the left of the reference for numbers less than 10. See the section entitled

A back reference matches whatever actually matched the capturing subpattern in the current subject string, rather than anything matching the subpattern itself. So the pattern

(sens|respons)e and 1ibility

matches

((?i)rah)s+1

matches

There may be more than one back reference to the same subpattern. If a subpattern has not actually been used in a particular match, any back references to it always fail. For example, the pattern

(a|(bc))2

always fails if it starts to match

A back reference that occurs inside the parentheses to which it refers fails when the subpattern is first used, so, for example, (a1) never matches. However, such references can be useful inside repeated subpatterns. For example, the pattern

(a|b1)+

matches any number of

ASSERTIONS

An assertion is a test on the characters following or preceding the current matching point that does not actually consume any characters. The simple assertions coded as b, B, A, Z, z, ^ and $ are described above. More complicated assertions are coded as subpatterns. There are two kinds: those that look ahead of the current position in the subject string, and those that look behind it.

An assertion subpattern is matched in the normal way, except that it does not cause the current matching position to be changed. Lookahead assertions start with (?= for positive assertions and (?! for negative assertions. For example,

w+(?=;)

matches a word followed by a semicolon, but does not include the semicolon in the match, and

foo(?!bar)

matches any occurrence of

(?!foo)bar

does not find an occurrence of

Lookbehind assertions start with (?

(?

does find an occurrence of

(?

is permitted, but

(?

causes an error at compile time. Branches that match different length strings are permitted only at the top level of a lookbehind assertion. This is an extension compared with Perl 5.005, which requires all branches to match the same length of string. An assertion such as

(?

is not permitted, because its single top-level branch can match two different lengths, but it is acceptable if rewritten to use two top-level branches:

(?

The implementation of lookbehind assertions is, for each alternative, to temporarily move the current position back by the fixed width and then try to match. If there are insufficient characters before the current position, the match is deemed to fail. Lookbehinds in conjunction with once-only subpatterns can be particularly useful for matching at the ends of strings; an example is given at the end of the section on once-only subpatterns.

Several assertions (of any sort) may occur in succession. For example,

(?

matches not match

(?

This time the first assertion looks at the preceding six characters, checking that the first three are digits, and then the second assertion checks that the preceding three characters are not

Assertions can be nested in any combination. For example,

(?

matches an occurrence of

(?

is another pattern which matches

Assertion subpatterns are not capturing subpatterns, and may not be repeated, because it makes no sense to assert the same thing several times. If any kind of assertion contains capturing subpatterns within it, these are counted for the purposes of numbering the capturing subpatterns in the whole pattern. However, substring capturing is carried out only for positive assertions, because it does not make sense for negative assertions.

Assertions count towards the maximum of 200 parenthesized subpatterns.

ONCE-ONLY SUBPATTERNS

With both maximizing and minimizing repetition, failure of what follows normally causes the repeated item to be re-evaluated to see if a different number of repeats allows the rest of the pattern to match. Sometimes it is useful to prevent this, either to change the nature of the match, or to cause it fail earlier than it otherwise might, when the author of the pattern knows there is no point in carrying on.

Consider, for example, the pattern d+foo when applied to the subject line

123456bar

After matching all 6 digits and then failing to match

(?

This kind of parenthesis

An alternative description is that a subpattern of this type matches the string of characters that an identical standalone pattern would match, if anchored at the current point in the subject string.

Once-only subpatterns are not capturing subpatterns. Simple cases such as the above example can be thought of as a maximizing repeat that must swallow everything it can. So, while both d+ and d+? are prepared to adjust the number of digits they match in order to make the rest of the pattern match, (?

This construction can of course contain arbitrarily complicated subpatterns, and it can be nested.

Once-only subpatterns can be used in conjunction with lookbehind assertions to specify efficient matching at the end of the subject string. Consider a simple pattern such as

abcd$

when applied to a long string which does not match. Because matching proceeds from left to right, PCRE will look for each

^.*abcd$

the initial .* matches the entire string at first, but when this fails (because there is no following

^(?

there can be no backtracking for the .* item; it can match only the entire string. The subsequent lookbehind assertion does a single test on the last four characters. If it fails, the match fails immediately. For long strings, this approach makes a significant difference to the processing time.

When a pattern contains an unlimited repeat inside a subpattern that can itself be repeated an unlimited number of times, the use of a once-only subpattern is the only way to avoid some failing matches taking a very long time indeed. The pattern

(D+|

matches an unlimited number of substrings that either consist of non-digits, or digits enclosed in

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

it takes a long time before reporting failure. This is because the string can be divided between the two repeats in a large number of ways, and all have to be tried. (The example used [!?? rather than a single character at the end, because both PCRE and Perl have an optimization that allows for fast failure when a single character is used. They remember the last single character that is required for a match, and fail early if it is not present in the string.) If the pattern is changed to

((?

sequences of non-digits cannot be broken, and failure happens quickly.

CONDITIONAL SUBPATTERNS

It is possible to cause the matching process to obey a subpattern conditionally or to choose between two alternative subpatterns, depending on the result of an assertion, or whether a previous capturing subpattern matched or not. The two possible forms of conditional subpattern are

(?(condition)yes-pattern) (?(condition)yes-pattern|no-pattern)

If the condition is satisfied, the yes-pattern is used; otherwise the no-pattern (if present) is used. If there are more than two alternatives in the subpattern, a compile-time error occurs.

There are two kinds of condition. If the text between the parentheses consists of a sequence of digits, the condition is satisfied if the capturing subpattern of that number has previously matched. Consider the following pattern, which contains non-significant white space to make it more readable (assume the PCRE_EXTENDED option) and to divide it into three parts for ease of discussion:

( )? [^()?+ (?(1) ) )

The first part matches an optional opening parenthesis, and if that character is present, sets it as the first captured substring. The second part matches one or more characters that are not parentheses. The third part is a conditional subpattern that tests whether the first set of parentheses matched or not. If they did, that is, if subject started with an opening parenthesis, the condition is true, and so the yes-pattern is executed and a closing parenthesis is required. Otherwise, since no-pattern is not present, the subpattern matches nothing. In other words, this pattern matches a sequence of non-parentheses, optionally enclosed in parentheses.

If the condition is not a sequence of digits, it must be an assertion. This may be a positive or negative lookahead or lookbehind assertion. Consider this pattern, again containing non-significant white space, and with the two alternatives on the second line:

(?(?=[^a-z?*[a-z?) d{2}-[a-z?{3}-d{2} | d{2}-d{2}-d{2} )

The condition is a positive lookahead assertion that matches an optional sequence of non-letters followed by a letter. In other words, it tests for the presence of at least one letter in the subject. If a letter is found, the subject is matched against the first alternative; otherwise it is matched against the second. This pattern matches strings in one of the two forms dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits.

COMMENTS

The sequence (?# marks the start of a comment which continues up to the next closing parenthesis. Nested parentheses are not permitted. The characters that make up a comment play no part in the pattern matching at all.

If the PCRE_EXTENDED option is set, an unescaped # character outside a character class introduces a comment that continues up to the next newline character in the pattern.

RECURSIVE PATTERNS

Consider the problem of matching a string in parentheses, allowing for unlimited nested parentheses. Without the use of recursion, the best that can be done is to use a pattern that matches up to some fixed depth of nesting. It is not possible to handle an arbitrary nesting depth. Perl 5.6 has provided an experimental facility that allows regular expressions to recurse (amongst other things). It does this by interpolating Perl code in the expression at run time, and the code can refer to the expression itself. A Perl pattern to solve the parentheses problem can be created like this:

$re = qr{ (?: (?

The (?p{...}) item interpolates Perl code at run time, and in this case refers recursively to the pattern in which it appears. Obviously, PCRE cannot support the interpolation of Perl code. Instead, the special item (?R) is provided for the specific case of recursion. This PCRE pattern solves the parentheses problem (assume the PCRE_EXTENDED option is set so that white space is ignored):

( (?

First it matches an opening parenthesis. Then it matches any number of substrings which can either be a sequence of non-parentheses, or a recursive match of the pattern itself (i.e. a correctly parenthesized substring). Finally there is a closing parenthesis.

This particular example pattern contains nested unlimited repeats, and so the use of a once-only subpattern for matching strings of non-parentheses is important when applying the pattern to strings that do not match. For example, when it is applied to

(aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()

it yields

The values set for any capturing subpatterns are those from the outermost level of the recursion at which the subpattern value is set. If the pattern above is matched against

(ab(cd)ef)

the value for the capturing parentheses is

( ( (? pcre_malloc, freeing it via pcre_free__ afterwards. If no memory can be obtained, it saves data for the first 15 capturing parentheses only, as there is no way to give an out-of-memory error from within a recursion.

PERFORMANCE

Certain items that may appear in patterns are more efficient than others. It is more efficient to use a character class like [aeiou? than a set of alternatives such as (a|e|i|o|u). In general, the simplest construction that provides the required behaviour is usually the most efficient. Jeffrey Friedl's book contains a lot of discussion about optimizing regular expressions for efficient performance.

When a pattern begins with .* and the PCRE_DOTALL option is set, the pattern is implicitly anchored by PCRE, since it can match only at the start of a subject string. However, if PCRE_DOTALL is not set, PCRE cannot make this optimization, because the . metacharacter does not then match a newline, and if the subject string contains newlines, the pattern may match from the character immediately following one of them instead of from the very start. For example, the pattern

(.*) second

matches the subject

If you are using such a pattern with subject strings that do not contain newlines, the best performance is obtained by setting PCRE_DOTALL, or starting the pattern with ^.* to indicate explicit anchoring. That saves PCRE from having to scan along the subject looking for a newline to restart at.

Beware of patterns that contain nested indefinite repeats. These can take a long time to run when applied to a string that does not match. Consider the pattern fragment

(a+)*

This can match

An optimization catches some of the more simple cases such as

(a+)*b

where a literal character follows. Before embarking on the standard matching procedure, PCRE checks that there is a

(a+)*d

with the pattern above. The former gives a failure almost instantly when applied to a whole line of

UTF-8 SUPPORT

Starting at release 3.3, PCRE has some support for character strings encoded in the UTF-8 format. This is incomplete, and is regarded as experimental. In order to use it, you must configure PCRE to include UTF-8 support in the code, and, in addition, you must call pcre_compile() with the PCRE_UTF8 option flag. When you do this, both the pattern and any subject strings that are matched against it are treated as UTF-8 strings instead of just strings of bytes, but only in the cases that are mentioned below.

If you compile PCRE with UTF-8 support, but do not use it at run time, the library will be a bit bigger, but the additional run time overhead is limited to testing the PCRE_UTF8 flag in several places, so should not be very large.

PCRE assumes that the strings it is given contain valid UTF-8 codes. It does not diagnose invalid UTF-8 strings. If you pass invalid UTF-8 strings to PCRE, the results are undefined.

Running with PCRE_UTF8 set causes these changes in the way PCRE works:

1. In a pattern, the escape sequence x{...}, where the contents of the braces is a string of hexadecimal digits, is interpreted as a UTF-8 character whose code number is the given hexadecimal number, for example: x{1234}. This inserts from one to six literal bytes into the pattern, using the UTF-8 encoding. If a non-hexadecimal digit appears between the braces, the item is not recognized.

2. The original hexadecimal escape sequence, xhh, generates a two-byte UTF-8 character if its value is greater than 127.

3. Repeat quantifiers are NOT correctly handled if they follow a multibyte character. For example, x{100}* and xc3+ do not work. If you want to repeat such characters, you must enclose them in non-capturing parentheses, for example (?:x{100}), at present.

4. The dot metacharacter matches one UTF-8 character instead of a single byte.

5. Unlike literal UTF-8 characters, the dot metacharacter followed by a repeat quantifier does operate correctly on UTF-8 characters instead of single bytes.

4. Although the x{...} escape is permitted in a character class, characters whose values are greater than 255 cannot be included in a class.

5. A class is matched against a UTF-8 character instead of just a single byte, but it can match only characters whose values are less than 256. Characters with greater values always fail to match a class.

6. Repeated classes work correctly on multiple characters.

7. Classes containing just a single character whose value is greater than 127 (but less than 256), for example, [x80? or [^x{93}?, do not work because these are optimized into single byte matches. In the first case, of course, the class brackets are just redundant.

8. Lookbehind assertions move backwards in the subject by a fixed number of characters instead of a fixed number of bytes. Simple cases have been tested to work correctly, but there may be hidden gotchas herein.

9. The character types such as d and w do not work correctly with UTF-8 characters. They continue to test a single byte.

10. Anything not explicitly mentioned here continues to work in bytes rather than in characters.

DIFFERENCES FROM PERL

The differences described here are with respect to Perl 5.005.

1. By default, a whitespace character is any character that the C library function isspace() recognizes, though it is possible to compile PCRE with alternative character type tables. Normally isspace() matches space, formfeed, newline, carriage return, horizontal tab, and vertical tab. Perl 5 no longer includes vertical tab in its set of whitespace characters. The v escape that was in the Perl documentation for a long time was never in fact recognized. However, the character itself was treated as whitespace at least up to 5.002. In 5.004 and 5.005 it does not match s.

2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl permits them, but they do not mean what you might think. For example, (?!a){3} does not assert that the next three characters are not

3. Capturing subpatterns that occur inside negative lookahead assertions are counted, but their entries in the offsets vector are never set. Perl sets its numerical variables from any such patterns that are matched before the assertion fails to match something (thereby succeeding), but only if the negative lookahead assertion contains just one branch.

4. Though binary zero characters are supported in the subject string, they are not allowed in a pattern string because it is passed as a normal C string, terminated by zero. The escape sequence

5. The following Perl escape sequences are not supported: l, u, L, U, E, Q. In fact these are implemented by Perl's general string-handling and are not part of its pattern matching engine.

6. The Perl G assertion is not supported as it is not relevant to single pattern matches.

7. Fairly obviously, PCRE does not support the (?{code}) and (?p{code}) constructions. However, there is some experimental support for recursive patterns using the non-Perl item (?R).

8. There are at the time of writing some oddities in Perl 5.005_02 concerned with the settings of captured strings when part of a pattern is repeated. For example, matching

In Perl 5.004 $2 is set in both cases, and that is also true of PCRE. If in the future Perl changes to a consistent state that is different, PCRE may change to follow.

9. Another as yet unresolved discrepancy is that in Perl 5.005_02 the pattern /^(a)?(?(1)a|b)+$/ matches the string

10. The following UTF-8 features of Perl 5.6 are not implemented:

a. The escape sequence C to match a single byte.

b. The use of Unicode tables and properties and escapes p, P, and X.

11. PCRE provides some extensions to the Perl regular expression facilities:

(a) Although lookbehind assertions must match fixed length strings, each alternative branch of a lookbehind assertion can match a different length of string. Perl 5.005 requires them all to have the same length.

(b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $ meta- character matches only at the very end of the string.

(c) If PCRE_EXTRA is set, a backslash followed by a letter with no special meaning is faulted.

(d) If PCRE_UNGREEDY is set, the greediness of the repetition quantifiers is inverted, that is, by default they are not greedy, but if followed by a question mark they are.

(e) PCRE_ANCHORED can be used to force a pattern to be tried only at the start of the subject.

(f) The PCRE_NOTBOL, PCRE_NOTEOL, and PCRE_NOTEMPTY options for pcre_exec() have no Perl equivalents.

(g) The (?R) construct allows for recursive pattern matching (Perl 5.6 can do this using the (?p{code}) construct, which PCRE cannot of course support.)

AUTHOR

Philip Hazel University Computing Service, New Museums Site, Cambridge CB2 3QG, England. Phone: +44 1223 334714

Last updated: 28 August 2000, the 250th anniversary of the death of J.S. Bach. Copyright (c) 1997-2000 University of Cambridge.


This page is a man page (or other imported legacy content). We are unable to automatically determine the license status of this page.

lib/main.php:944: Notice: PageInfo: Cannot find action page

lib/main.php:839: Notice: PageInfo: Unknown action