Penguin

MF

MF

NAME SYNOPSIS DESCRIPTION ONLINE GRAPHICS OUTPUT OPTIONS ENVIRONMENT FONT UTILITIES FILES SUGGESTED READING COMMENTS SEE ALSO BUGS AUTHORS


NAME

mf, mfw, inimf, virmf - Metafont, a language for font and logo design

SYNOPSIS

mf [''options''? [''commands''?

DESCRIPTION

This manual page is not meant to be exhaustive. The complete documentation for this version of TEX can be found in the info file or manual Web2C: A TeX implementation.

M ETAFONT reads the program in the specified files and outputs font rasters (in gf format) and font metrics (in tfm format). The M ETAFONT language is described in The M ETAFONT book.

Like TEX, M ETAFONT is normally used with a large body of precompiled macros, and font generation in particular requires the support of several macro files. This version of M ETAFONT looks at its command line to see what name it was called under. Both inimf and virmf are symlinks to the mf executable. When called as inimf (or when the --ini option is given) it can be used to precompile macros into a .base file. When called as virmf it will use the plain base. When called under any other name, M ETAFONT will use that name as the name of the base to use. For example, when called as mf the mf base is used, which is identical to the plain base. Other bases than plain are rarely used.

The commands given on the command line to the M ETAFONT program are passed to it as the first input line. (But it is often easier to type extended arguments as the first input line, since UNIX shells tend to gobble up or misinterpret M ETAFONT 's favorite symbols, like semicolons, unless you quote them.) As described in The M ETAFONT book, that first line should begin with a filename, a \controlsequence, or a .

The normal usage is to say

mf 'mode= __n);]' input font''

to start processing font.mf. The single quotes are the best way of keeping the Unix shell from misinterpreting the semicolons and from removing the \ character, which is needed here to keep M ETAFONT from thinking that you want to produce a font called mode. (Or you can just say mf and give the other stuff on the next line, without quotes.) Other control sequences, such as batchmode (for silent operation) can also appear. The name font will be the ``jobname, and is used in forming output file names. If M ETAFONT doesn't get a file name in the first line, the jobname is mfput. The default extension, .mf'', can be overridden by specifying an extension explicitly.

A log of error messages goes into the file jobname.log. The output files are jobname.tfm and jobname.number, where mode in this example is shown generically as localfont (see below) must be substituted. If the mode is not specified or is not valid for your site, M ETAFONT will default to proof mode which produces large character images for use in font design and refinement. Proof mode can be recognized by the suffix .2602gf after the jobname. Examples of proof mode output can be found in Computer Modern Typefaces (Volume E of Computers and Typesetting). The system of magsteps is identical to the system used by TEX, with values generally in the range 0.5, 1.0, 2.0, 3.0, 4.0 and 5.0. A listing of gf numbers for 118-dpi, 240-dpi and 300-dpi fonts is shown below.

MAGSTEP 118 dpi 240 dpi 300 dpi

mag=magstep(0) 118 240 300 mag=magstep(0.5) 129 263 329 mag=magstep(1)? 142 288 360 mag=magstep(2)? 170 346 432 mag=magstep(3)? 204 415 518 mag=magstep(4)? 245 498 622 mag=magstep(5)? 294 597 746 Magnification can also be specified not as a magstep but as an arbitrary value, such as 1.315, to create special character sizes.

Before font production can begin, it is necessary to set up the appropriate base files. The minimum set of components for font production for a given print-engine is the plain.mf macro file and the local mode_def file. The macros in plain.mf can be studied in an appendix to the M ETAFONT book; they were developed by Donald E. Knuth, and this file should never be altered except when it is officially upgraded. Each mode_def specification helps adapt fonts to a particular print-engine. There is a regular discussion of mode_defs in TUGboat, the journal of the TEX Users Group. The local ones in use on this computer should be in modes.mf.

The e response to M ETAFONT 's error-recovery mode invokes the system default editor at the erroneous line of the source file. There is an environment variable, MFEDIT, that overrides the default editor. It should contain a string with vi editor can be set with the csh__ command

setenv MFEDIT

A convenient file in the library is null.mf, containing nothing. When mf can't find the file it thinks you want to input, it keeps asking you for another file name; responding `null' gets you out of the loop if you don't want to input anything.

ONLINE GRAPHICS OUTPUT

M ETAFONT can use most modern displays, so you can see its output without printing. Chapter 23 of The M ETAFONT book describes what you can do. This implementation of M ETAFONT uses environment variables to determine which display device you want to use. First it looks for a variable MFTERM, and then for TERM. If it can't find either, you get no online output. Otherwise, the value of the variable determines the device to use: hp2627, sun (for old !SunView?), tek, uniterm (for an Atari ST Tek 4014 emulator), xterm (for either X10 or X11). Some of these devices may not be supported in all M ETAFONT executables; the choice is made at compilation time.

On some systems, there are two M ETAFONT binaries, mf and mfw. On those systems the mfw binary supports graphics, while the mf binary does not.

OPTIONS

This version of M ETAFONT understands the following command line options.

--base base

Use base as the name of the base to be used, instead of the name by which M ETAFONT was called or a % line.

--file-line-error-style

Print error messages in the form file:line:error which is similar to the way many compilers format them.

--help

Print help message and exit.

--ini

Be inimf, for dumping bases; this is implicitly true if the program is called as inimf.

--interaction mode

Sets the interaction mode. The mode can be one of batchmode, nonstopmode, scrollmode, and errorstopmode. The meaning of these modes is the same as that of the corresponding commands.

--kpathsea-debug bitmask

Sets path searching debugging flags according to the bitmask. See the Kpathsea manual for details.

--maketex fmt

Enable mktexfmt, where fmt must be mf.

--no-maketex fmt

Disable mktexfmt, where fmt must be mf.

--progname name

Pretend to be program name. This affects both the format used and the search paths.

--recorder

Enable the filename recorder. This leaves a trace of the files opened for input and output in a file with extension .fls.

--translate-file tcxname

Use the tcxname translation table.

--version

Print version information and exit.

ENVIRONMENT

See the Kpathsearch library documentation (the `Path specifications' node) for the details of how the environment variables are use when searching. The kpsewhich utility can be used to query the values of the variables.

If the environment variable TEXMFOUTPUT is set, M ETAFONT attempts to put its output files in it, if they cannot be put in the current directory. Again, see tex(1).

MFINPUTS

Search path for input and openin files.

MFEDIT

Command template for switching to editor.

MFTERM

Determines the online graphics display. If MFTERM is not set, and DISPLAY is set, the Metafont window support for X is used. (DISPLAY must be set to a valid X server specification, as usual.) If neither MFTERM nor DISPLAY is set, TERM is used to guess the window support to use.

FONT UTILITIES

A number of utility programs are available. The following is a partial list of available utilities and their purpose. Consult your local M ETAFONT guru for details.

gftopk

Takes a gf file and produces a more tightly packed pk font file.

gftodvi

Produces proof sheets for fonts.

gftype

Displays the contents of a gf file in mnemonics and/or images.

pktype

Mnemonically displays the contents of a pk file.

mft

Formats a source file as shown in Computer Modern Typefaces.

FILES

mf.pool

Encoded text of M ETAFONT 's messages.

*.base

Predigested M ETAFONT base files.

$TEXMFMAIN/metafont/base/plain.mf

The standard base.

$TEXMFMAIN/metafont/misc/modes.mf

The file of mode_defs for your site's various printers

SUGGESTED READING

Donald E. Knuth, The M ETAFONT book (Volume C of Computers and Typesetting), Addison-Wesley, 1986, ISBN 0-201-13445-4. Donald E. Knuth, M ETAFONT : The Program (Volume D of Computers and Typesetting), Addison-Wesley, 1986, ISBN 0-201-13438-1. Donald E. Knuth, Computer Modern Typefaces (Volume E of Computers and Typesetting), Addison-Wesley, 1986, ISBN 0-201-13446-2. TUGboat (the journal of the TEX Users Group).

COMMENTS

Warning: ``Type design can be hazardous to your other interests. Once you get hooked, you will develop intense feelings about letterforms; the medium will intrude on the messages that you read. And you will perpetually be thinking of improvements to the fonts that you see everywhere, especially those of your own design.''

SEE ALSO

gftopk(1), gftodvi(1), gftype(1), mft(1), pltotf(1), tftopl(1).

BUGS

On January 4, 1986 the ``final'' bug in M ETAFONT was discovered and removed. If an error still lurks in the code, Donald E. Knuth promises to pay a finder's fee which doubles every year to the first person who finds it. Happy hunting.

AUTHORS

M ETAFONT was designed by Donald E. Knuth, who implemented it using his W EB system for Pascal programs. It was originally ported to Unix by Paul Richards at the University of Illinois at Urbana-Champaign. This page was mostly written by Pierre !MacKay?.


This page is a man page (or other imported legacy content). We are unable to automatically determine the license status of this page.