GCC(C) GNU GCC(C) NAME gcc - GNU project C and C++ compiler SYNOPSIS gcc [-c|-S|-E] [-std=standard] [-g] [-pg] [-Olevel] [-Wwarn...] [-pedantic] [-Idir...] [-Ldir...] [-Dmacro[=defn]...] [-Umacro] [-foption...] [-mmachine-option...] [-o outfile] infile... Only the most useful options are listed here; see below for the remainder. g++ accepts mostly the same options as gcc. DESCRIPTION When you invoke GCC, it normally does preprocessing, com- pilation, assembly and linking. The ``overall options'' allow you to stop this process at an intermediate stage. For example, the -c option says not to run the linker. Then the output consists of object files output by the assembler. Other options are passed on to one stage of processing. Some options control the preprocessor and others the com- piler itself. Yet other options control the assembler and linker; most of these are not documented here, since you rarely need to use any of them. Most of the command line options that you can use with GCC are useful for C programs; when an option is only useful with another language (usually C++), the explanation says so explicitly. If the description for a particular option does not mention a source language, you can use that option with all supported languages. The gcc program accepts options and file names as operands. Many options have multi-letter names; therefore multiple single-letter options may not be grouped: -dr is very different from -d -r. You can mix options and other arguments. For the most part, the order you use doesn't matter. Order does matter when you use several options of the same kind; for exam- ple, if you specify -L more than once, the directories are searched in the order specified. Many options have long names starting with -f or with -W---for example, -fforce-mem, -fstrength-reduce, -Wformat and so on. Most of these have both positive and negative forms; the negative form of -ffoo would be -fno-foo. This manual documents only one of these two forms, whichever one is not the default. OPTIONS Option Summary Here is a summary of all the options, grouped by type. Explanations are in the following sections. Overall Options -c -S -E -o file -pipe -pass-exit-codes -x lan- guage -v --target-help --help C Language Options -ansi -std=standard -aux-info filename -fno-asm -fno-builtin -fhosted -ffreestanding -trigraphs -traditional -traditional-cpp -fallow-single-preci- sion -fcond-mismatch -fsigned-bitfields -fsigned-char -funsigned-bitfields -funsigned-char -fwritable-strings -fshort-wchar C++ Language Options -fno-access-control -fcheck-new -fconserve-space -fno-const-strings -fdollars-in-identifiers -fno-elide-constructors -fno-enforce-eh-specs -fex- ternal-templates -falt-external-templates -ffor-scope -fno-for-scope -fno-gnu-keywords -fno-implicit-tem- plates -fno-implicit-inline-templates -fno-imple- ment-inlines -fms-extensions -fno-nonansi-builtins -fno-operator-names -fno-optional-diags -fpermissive -frepo -fno-rtti -fstats -ftemplate-depth-n -fuse-cxa-atexit -fno-weak -nostdinc++ -fno-default-inline -Wctor-dtor-privacy -Wnon-vir- tual-dtor -Wreorder -Weffc++ -Wno-deprecated -Wno-non-template-friend -Wold-style-cast -Wover- loaded-virtual -Wno-pmf-conversions -Wsign-promo -Wsynth Objective-C Language Options -fconstant-string-class=class-name -fgnu-runtime -fnext-runtime -gen-decls -Wno-protocol -Wselector Language Independent Options -fmessage-length=n -fdiagnostics-show-loca- tion=[once|every-line] Warning Options -fsyntax-only -pedantic -pedantic-errors -w -W -Wall -Waggregate-return -Wcast-align -Wcast-qual -Wchar-subscripts -Wcomment -Wconversion -Wdis- abled-optimization -Werror -Wfloat-equal -Wformat -Wformat=2 -Wformat-nonliteral -Wformat-security -Wid-clash-len -Wimplicit -Wimplicit-int -Wim- plicit-function-declaration -Werror-implicit-func- tion-declaration -Wimport -Winline -Wlarger-than-len -Wlong-long -Wmain -Wmissing-braces -Wmissing-decla- rations -Wmissing-format-attribute -Wmissing-noreturn -Wmultichar -Wno-format-extra-args -Wno-format-y2k -Wno-import -Wpacked -Wpadded -Wparentheses -Wpointer-arith -Wredundant-decls -Wreturn-type -Wsequence-point -Wshadow -Wsign-compare -Wswitch -Wsystem-headers -Wtrigraphs -Wundef -Wuninitialized -Wunknown-pragmas -Wunreachable-code -Wunused -Wunused-function -Wunused-label -Wunused-parameter -Wunused-value -Wunused-variable -Wwrite-strings C-only Warning Options -Wbad-function-cast -Wmissing-prototypes -Wnested-externs -Wstrict-prototypes -Wtraditional Debugging Options -a -ax -dletters -dumpspecs -dumpmachine -dumpversion -fdump-unnumbered -fdump-transla- tion-unit[-n] -fdump-class-hierarchy[-n] -fdump-ast-original[-n] -fdump-ast-optimized[-n] -fmem-report -fpretend-float -fprofile-arcs -ftest-coverage -ftime-report -g -glevel -gcoff -gdwarf -gdwarf-1 -gdwarf-1+ -gdwarf-2 -ggdb -gstabs -gstabs+ -gxcoff -gxcoff+ -p -pg -print-file-name=library -print-libgcc-file-name -print-multi-directory -print-multi-lib -print-prog-name=program -print-search-dirs -Q -save-temps -time Optimization Options -falign-functions=n -falign-jumps=n -falign-labels=n -falign-loops=n -fbranch-probabilities -fcaller-saves -fcse-follow-jumps -fcse-skip-blocks -fdata-sections -fdce -fdelayed-branch -fdelete-null-pointer-checks -fexpensive-optimizations -ffast-math -ffloat-store -fforce-addr -fforce-mem -ffunction-sections -fgcse -finline-functions -finline-limit=n -fkeep-inline-functions -fkeep-static-consts -fmove-all-movables -fno-default-inline -fno-defer-pop -fno-function-cse -fno-guess-branch-probability -fno-inline -fno-math-errno -fno-peephole -fno-peephole2 -fomit-frame-pointer -foptimize-register-move -fopti- mize-sibling-calls -freduce-all-givs -fregmove -fre- name-registers -frerun-cse-after-loop -fre- run-loop-opt -fschedule-insns -fschedule-insns2 -fsingle-precision-constant -fssa -fstrength-reduce -fstrict-aliasing -fthread-jumps -ftrapv -fun- roll-all-loops -funroll-loops --param name=value -O -O0 -O1 -O2 -O3 -Os Preprocessor Options -$ -Aquestion=answer -A-question[=answer] -C -dD -dI -dM -dN -Dmacro[=defn] -E -H -idirafter dir -include file -imacros file -iprefix file -iwithpre- fix dir -iwithprefixbefore dir -isystem dir -M -MM -MF -MG -MP -MQ -MT -nostdinc -P -remap -tri- graphs -undef -Umacro -Wp,option Assembler Option -Wa,option Linker Options object-file-name -llibrary -nostartfiles -node- faultlibs -nostdlib -s -static -static-libgcc -shared -shared-libgcc -symbolic -Wl,option -Xlinker option -u symbol Directory Options -Bprefix -Idir -I- -Ldir -specs=file Target Options -b machine -V version Machine Dependent Options M680x0 Options -m68000 -m68020 -m68020-40 -m68020-60 -m68030 -m68040 -m68060 -mcpu32 -m5200 -m68881 -mbitfield -mc68000 -mc68020 -mfpa -mnobitfield -mrtd -mshort -msoft-float -mpcrel -malign-int -mstrict-align M68hc1x Options -m6811 -m6812 -m68hc11 -m68hc12 -mauto-incdec -mshort -msoft-reg-count=count VAX Options -mg -mgnu -munix SPARC Options -mcpu=cpu-type -mtune=cpu-type -mcmodel=code-model -m32 -m64 -mapp-regs -mbroken-saverestore -mcypress -mepilogue -mfaster-structs -mflat -mfpu -mhard-float -mhard-quad-float -mimpure-text -mlive-g0 -mno-app-regs -mno-epilogue -mno-faster-structs -mno-flat -mno-fpu -mno-impure-text -mno-stack-bias -mno-unaligned-dou- bles -msoft-float -msoft-quad-float -msparclite -mstack-bias -msupersparc -munaligned-doubles -mv8 Convex Options -mc1 -mc2 -mc32 -mc34 -mc38 -margcount -mnoargcount -mlong32 -mlong64 -mvolatile-cache -mvolatile-nocache AMD29K Options -m29000 -m29050 -mbw -mnbw -mdw -mndw -mlarge -mnormal -msmall -mkernel-registers -mno-reuse-arg-regs -mno-stack-check -mno-storem-bug -mreuse-arg-regs -msoft-float -mstack-check -mstorem-bug -muser-registers ARM Options -mapcs-frame -mno-apcs-frame -mapcs-26 -mapcs-32 -mapcs-stack-check -mno-apcs-stack-check -mapcs-float -mno-apcs-float -mapcs-reentrant -mno-apcs-reentrant -msched-prolog -mno-sched-prolog -mlittle-endian -mbig-endian -mwords-little-endian -malignment-traps -mno-alignment-traps -msoft-float -mhard-float -mfpe -mthumb-interwork -mno-thumb-interwork -mcpu=name -march=name -mfpe=name -mstructure-size-boundary=n -mbsd -mxopen -mno-symrename -mabort-on-noreturn -mlong-calls -mno-long-calls -msingle-pic-base -mno-single-pic-base -mpic-register=reg -mnop-fun-dllimport -mpoke-function-name -mthumb -marm -mtpcs-frame -mtpcs-leaf-frame -mcaller-super-interworking -mcallee-super-interwork- ing MN10200 Options -mrelax MN10300 Options -mmult-bug -mno-mult-bug -mam33 -mno-am33 -mno-crt0 -mrelax M32R/D Options -mcode-model=model-type -msdata=sdata-type -G num M88K Options -m88000 -m88100 -m88110 -mbig-pic -mcheck-zero-division -mhandle-large-shift -miden- tify-revision -mno-check-zero-division -mno-ocs-debug-info -mno-ocs-frame-position -mno-optimize-arg-area -mno-serialize-volatile -mno-underscores -mocs-debug-info -mocs-frame-posi- tion -moptimize-arg-area -mserialize-volatile -mshort-data-num -msvr3 -msvr4 -mtrap-large-shift -muse-div-instruction -mversion-03.00 -mwarn-passed-structs RS/6000 and PowerPC Options -mcpu=cpu-type -mtune=cpu-type -mpower -mno-power -mpower2 -mno-power2 -mpowerpc -mpowerpc64 -mno-powerpc -mpowerpc-gpopt -mno-powerpc-gpopt -mpowerpc-gfxopt -mno-powerpc-gfxopt -mnew-mnemonics -mold-mnemonics -mfull-toc -mminimal-toc -mno-fop-in-toc -mno-sum-in-toc -m64 -m32 -mxl-call -mno-xl-call -mthreads -mpe -msoft-float -mhard-float -mmultiple -mno-multiple -mstring -mno-string -mupdate -mno-update -mfused-madd -mno-fused-madd -mbit-align -mno-bit-align -mstrict-align -mno-strict-align -mrelocatable -mno-relocatable -mrelocatable-lib -mno-relocat- able-lib -mtoc -mno-toc -mlittle -mlittle-endian -mbig -mbig-endian -mcall-aix -mcall-sysv -mcall-netbsd -mprototype -mno-prototype -msim -mmvme -mads -myellowknife -memb -msdata -msdata=opt -mvxworks -G num RT Options -mcall-lib-mul -mfp-arg-in-fpregs -mfp-arg-in-gregs -mfull-fp-blocks -mhc-struct-return -min-line-mul -mminimum-fp-blocks -mnohc-struct-return MIPS Options -mabicalls -mcpu=cpu-type -membedded-data -muninit-const-in-rodata -membedded-pic -mfp32 -mfp64 -mgas -mgp32 -mgp64 -mgpopt -mhalf-pic -mhard-float -mint64 -mips1 -mips2 -mips3 -mips4 -mlong64 -mlong32 -mlong-calls -mmemcpy -mmips-as -mmips-tfile -mno-abicalls -mno-embedded-data -mno-uninit-const-in-rodata -mno-embedded-pic -mno-gpopt -mno-long-calls -mno-memcpy -mno-mips-tfile -mno-rnames -mno-stats -mrnames -msoft-float -m4650 -msingle-float -mmad -mstats -EL -EB -G num -nocpp -mabi=32 -mabi=n32 -mabi=64 -mabi=eabi -mfix7000 -mno-crt0 i386 Options -mcpu=cpu-type -march=cpu-type -mintel-syntax -mieee-fp -mno-fancy-math-387 -mno-fp-ret-in-387 -msoft-float -msvr3-shlib -mno-wide-multiply -mrtd -malign-double -mreg-alloc=list -mregparm=num -malign-jumps=num -malign-loops=num -malign-func- tions=num -mpreferred-stack-boundary=num -mthreads -mno-align-stringops -minline-all-stringops -mpush-args -maccumulate-outgoing-args -m128bit-long-double -m96bit-long-double -momit-leaf-frame-pointer HPPA Options -march=architecture-type -mbig-switch -mdis- able-fpregs -mdisable-indexing -mfast-indirect-calls -mgas -mjump-in-delay -mlong-load-store -mno-big-switch -mno-disable-fpregs -mno-dis- able-indexing -mno-fast-indirect-calls -mno-gas -mno-jump-in-delay -mno-long-load-store -mno-portable-runtime -mno-soft-float -mno-space-regs -msoft-float -mpa-risc-1-0 -mpa-risc-1-1 -mpa-risc-2-0 -mportable-runtime -mschedule=cpu-type -mspace-regs Intel 960 Options -mcpu-type -masm-compat -mclean-linkage -mcode-align -mcomplex-addr -mleaf-procedures -mic-compat -mic2.0-compat -mic3.0-compat -mintel-asm -mno-clean-linkage -mno-code-align -mno-complex-addr -mno-leaf-procedures -mno-old-align -mno-strict-align -mno-tail-call -mnumerics -mold-align -msoft-float -mstrict-align -mtail-call DEC Alpha Options -mfp-regs -mno-fp-regs -mno-soft-float -msoft-float -malpha-as -mgas -mieee -mieee-with-inexact -mieee-conformant -mfp-trap-mode=mode -mfp-round- ing-mode=mode -mtrap-precision=mode -mbuild-constants -mcpu=cpu-type -mbwx -mno-bwx -mcix -mno-cix -mmax -mno-max -mmemory-latency=time Clipper Options -mc300 -mc400 H8/300 Options -mrelax -mh -ms -mint32 -malign-300 SH Options -m1 -m2 -m3 -m3e -m4-nofpu -m4-single-only -m4-single -m4 -mb -ml -mdalign -mrelax -mbigtable -mfmovd -mhitachi -mnomacsave -mieee -misize -mpadstruct -mspace -mprefergot -musermode System V Options -Qy -Qn -YP,paths -Ym,dir ARC Options -EB -EL -mmangle-cpu -mcpu=cpu -mtext=text-section -mdata=data-section -mrodata=readonly-data-section TMS320C3x/C4x Options -mcpu=cpu -mbig -msmall -mregparm -mmemparm -mfast-fix -mmpyi -mbk -mti -mdp-isr-reload -mrpts=count -mrptb -mdb -mloop-unsigned -mparal- lel-insns -mparallel-mpy -mpreserve-float V850 Options -mlong-calls -mno-long-calls -mep -mno-ep -mpro- log-function -mno-prolog-function -mspace -mtda=n -msda=n -mzda=n -mv850 -mbig-switch NS32K Options -m32032 -m32332 -m32532 -m32081 -m32381 -mmult-add -mnomult-add -msoft-float -mrtd -mnortd -mregparam -mnoregparam -msb -mnosb -mbitfield -mnobitfield -mhimem -mnohimem AVR Options -mmcu=mcu -msize -minit-stack=n -mno-interrupts -mcall-prologues -mno-tablejump -mtiny-stack MCore Options -mhardlit -mno-hardlit -mdiv -mno-div -mre- lax-immediates -mno-relax-immediates -mwide-bitfields -mno-wide-bitfields -m4byte-functions -mno-4byte-functions -mcallgraph-data -mno-call- graph-data -mslow-bytes -mno-slow-bytes -mno-lsim -mlittle-endian -mbig-endian -m210 -m340 -mstack-increment IA-64 Options -mbig-endian -mlittle-endian -mgnu-as -mgnu-ld -mno-pic -mvolatile-asm-stop -mb-step -mregis- ter-names -mno-sdata -mconstant-gp -mauto-pic -min- line-divide-min-latency -minline-divide-max-throughput -mno-dwarf2-asm -mfixed-range=register-range S/390 and zSeries Options -mhard-float -msoft-float -mbackchain -mno-backchain -msmall-exec -mno-small-exec -mmvcle -mno-mvcle -m64 -m31 -mdebug -mno-debug Xtensa Options -mbig-endian -mlittle-endian -mdensity -mno-density -mmac16 -mno-mac16 -mmul16 -mno-mul16 -mmul32 -mno-mul32 -mnsa -mno-nsa -mminmax -mno-minmax -msext -mno-sext -mbooleans -mno-booleans -mhard-float -msoft-float -mfused-madd -mno-fused-madd -mserial- ize-volatile -mno-serialize-volatile -mtext-sec- tion-literals -mno-text-section-literals -mtar- get-align -mno-target-align -mlongcalls -mno-longcalls Code Generation Options -fcall-saved-reg -fcall-used-reg -ffixed-reg -fexcep- tions -fnon-call-exceptions -funwind-tables -fin- hibit-size-directive -finstrument-functions -fcheck-memory-usage -fprefix-function-name -fno-com- mon -fno-ident -fno-gnu-linker -fpcc-struct-return -fpic -fPIC -freg-struct-return -fshared-data -fshort-enums -fshort-double -fvolatile -fvolatile-global -fvolatile-static -fverbose-asm -fpack-struct -fstack-check -fstack-limit-regis- ter=reg -fstack-limit-symbol=sym -fargument-alias -fargument-noalias -fargument-noalias-global -flead- ing-underscore Options Controlling the Kind of Output Compilation can involve up to four stages: preprocessing, compilation proper, assembly and linking, always in that order. The first three stages apply to an individual source file, and end by producing an object file; linking combines all the object files (those newly compiled, and those specified as input) into an executable file. For any given input file, the file name suffix determines what kind of compilation is done: file.c C source code which must be preprocessed. file.i C source code which should not be preprocessed. file.ii C++ source code which should not be preprocessed. file.m Objective-C source code. Note that you must link with the library libobjc.a to make an Objective-C program work. file.mi Objective-C source code which should not be prepro- cessed. file.h C header file (not to be compiled or linked). file.cc file.cp file.cxx file.cpp file.c++ file.C C++ source code which must be preprocessed. Note that in .cxx, the last two letters must both be literally x. Likewise, .C refers to a literal capital C. file.f file.for file.FOR Fortran source code which should not be preprocessed. file.F file.fpp file.FPP Fortran source code which must be preprocessed (with the traditional preprocessor). file.r Fortran source code which must be preprocessed with a RATFOR preprocessor (not included with GCC). file.s Assembler code. file.S Assembler code which must be preprocessed. other An object file to be fed straight into linking. Any file name with no recognized suffix is treated this way. You can specify the input language explicitly with the -x option: -x language Specify explicitly the language for the following input files (rather than letting the compiler choose a default based on the file name suffix). This option applies to all following input files until the next -x option. Possible values for language are: c c-header cpp-output c++ c++-cpp-output objective-c objc-cpp-output assembler assembler-with-cpp f77 f77-cpp-input ratfor java -x none Turn off any specification of a language, so that sub- sequent files are handled according to their file name suffixes (as they are if -x has not been used at all). -pass-exit-codes Normally the gcc program will exit with the code of 1 if any phase of the compiler returns a non-success return code. If you specify -pass-exit-codes, the gcc program will instead return with numerically highest error produced by any phase that returned an error indication. If you only want some of the stages of compilation, you can use -x (or filename suffixes) to tell gcc where to start, and one of the options -c, -S, or -E to say where gcc is to stop. Note that some combinations (for example, -x cpp-output -E) instruct gcc to do nothing at all. -c Compile or assemble the source files, but do not link. The linking stage simply is not done. The ultimate output is in the form of an object file for each source file. By default, the object file name for a source file is made by replacing the suffix .c, .i, .s, etc., with .o. Unrecognized input files, not requiring compilation or assembly, are ignored. -S Stop after the stage of compilation proper; do not assemble. The output is in the form of an assembler code file for each non-assembler input file specified. By default, the assembler file name for a source file is made by replacing the suffix .c, .i, etc., with .s. Input files that don't require compilation are ignored. -E Stop after the preprocessing stage; do not run the compiler proper. The output is in the form of prepro- cessed source code, which is sent to the standard out- put. Input files which don't require preprocessing are ignored. -o file Place output in file file. This applies regardless to whatever sort of output is being produced, whether it be an executable file, an object file, an assembler file or preprocessed C code. Since only one output file can be specified, it does not make sense to use -o when compiling more than one input file, unless you are producing an executable file as output. If -o is not specified, the default is to put an exe- cutable file in a.out, the object file for source.suf- fix in source.o, its assembler file in source.s, and all preprocessed C source on standard output. -v Print (on standard error output) the commands executed to run the stages of compilation. Also print the ver- sion number of the compiler driver program and of the preprocessor and the compiler proper. -pipe Use pipes rather than temporary files for communica- tion between the various stages of compilation. This fails to work on some systems where the assembler is unable to read from a pipe; but the GNU assembler has no trouble. --help Print (on the standard output) a description of the command line options understood by gcc. If the -v option is also specified then --help will also be passed on to the various processes invoked by gcc, so that they can display the command line options they accept. If the -W option is also specified then com- mand line options which have no documentation associ- ated with them will also be displayed. --target-help Print (on the standard output) a description of target specific command line options for each tool. Compiling C++ Programs C++ source files conventionally use one of the suffixes .C, .cc, .cpp, .c++, .cp, or .cxx; preprocessed C++ files use the suffix .ii. GCC recognizes files with these names and compiles them as C++ programs even if you call the compiler the same way as for compiling C programs (usually with the name gcc). However, C++ programs often require class libraries as well as a compiler that understands the C++ language---and under some circumstances, you might want to compile pro- grams from standard input, or otherwise without a suffix that flags them as C++ programs. g++ is a program that calls GCC with the default language set to C++, and auto- matically specifies linking against the C++ library. On many systems, g++ is also installed with the name c++. When you compile C++ programs, you may specify many of the same command-line options that you use for compiling pro- grams in any language; or command-line options meaningful for C and related languages; or options that are meaning- ful only for C++ programs. Options Controlling C Dialect The following options control the dialect of C (or lan- guages derived from C, such as C++ and Objective C) that the compiler accepts: -ansi In C mode, support all ISO C89 programs. In C++ mode, remove GNU extensions that conflict with ISO C++. This turns off certain features of GCC that are incom- patible with ISO C89 (when compiling C code), or of standard C++ (when compiling C++ code), such as the "asm" and "typeof" keywords, and predefined macros such as "unix" and "vax" that identify the type of system you are using. It also enables the undesirable and rarely used ISO trigraph feature. For the C com- piler, it disables recognition of C++ style // com- ments as well as the "inline" keyword. The alternate keywords "__asm__", "__extension__", "__inline__" and "__typeof__" continue to work despite -ansi. You would not want to use them in an ISO C program, of course, but it is useful to put them in header files that might be included in compilations done with -ansi. Alternate predefined macros such as "__unix__" and "__vax__" are also available, with or without -ansi. The -ansi option does not cause non-ISO programs to be rejected gratuitously. For that, -pedantic is required in addition to -ansi. The macro "__STRICT_ANSI__" is predefined when the -ansi option is used. Some header files may notice this macro and refrain from declaring certain func- tions or defining certain macros that the ISO standard doesn't call for; this is to avoid interfering with any programs that might use these names for other things. Functions which would normally be built in but do not have semantics defined by ISO C (such as "alloca" and "ffs") are not built-in functions with -ansi is used. -std= Determine the language standard. This option is cur- rently only supported when compiling C. A value for this option must be provided; possible values are c89 iso9899:1990 ISO C89 (same as -ansi). iso9899:199409 ISO C89 as modified in amendment 1. c99 c9x iso9899:1999 iso9899:199x ISO C99. Note that this standard is not yet fully supported; see <http://gcc.gnu.org/c99status.html> for more information. The names c9x and iso9899:199x are deprecated. gnu89 Default, ISO C89 plus GNU extensions (including some C99 features). gnu99 gnu9x ISO C99 plus GNU extensions. When ISO C99 is fully implemented in GCC, this will become the default. The name gnu9x is deprecated. Even when this option is not specified, you can still use some of the features of newer standards in so far as they do not conflict with previous C standards. For example, you may use "__restrict__" even when -std=c99 is not specified. The -std options specifying some version of ISO C have the same effects as -ansi, except that features that were not in ISO C89 but are in the specified version (for example, // comments and the "inline" keyword in ISO C99) are not disabled. -aux-info filename Output to the given filename prototyped declarations for all functions declared and/or defined in a trans- lation unit, including those in header files. This option is silently ignored in any language other than C. Besides declarations, the file indicates, in comments, the origin of each declaration (source file and line), whether the declaration was implicit, prototyped or unprototyped (I, N for new or O for old, respectively, in the first character after the line number and the colon), and whether it came from a declaration or a definition (C or F, respectively, in the following character). In the case of function definitions, a K&R-style list of arguments followed by their declara- tions is also provided, inside comments, after the declaration. -fno-asm Do not recognize "asm", "inline" or "typeof" as a key- word, so that code can use these words as identifiers. You can use the keywords "__asm__", "__inline__" and "__typeof__" instead. -ansi implies -fno-asm. In C++, this switch only affects the "typeof" keyword, since "asm" and "inline" are standard keywords. You may want to use the -fno-gnu-keywords flag instead, which has the same effect. In C99 mode (-std=c99 or -std=gnu99), this switch only affects the "asm" and "typeof" keywords, since "inline" is a standard key- word in ISO C99. -fno-builtin Don't recognize built-in functions that do not begin with __builtin_ as prefix. GCC normally generates special code to handle certain built-in functions more efficiently; for instance, calls to "alloca" may become single instructions that adjust the stack directly, and calls to "memcpy" may become inline copy loops. The resulting code is often both smaller and faster, but since the function calls no longer appear as such, you cannot set a breakpoint on those calls, nor can you change the behavior of the functions by linking with a different library. In C++, -fno-builtin is always in effect. The -fbuiltin option has no effect. Therefore, in C++, the only way to get the optimization benefits of built-in functions is to call the function using the __builtin_ prefix. The GNU C++ Standard Library uses built-in functions to implement many functions (like "std::strchr"), so that you automatically get effi- cient code. -fhosted Assert that compilation takes place in a hosted envi- ronment. This implies -fbuiltin. A hosted environ- ment is one in which the entire standard library is available, and in which "main" has a return type of "int". Examples are nearly everything except a ker- nel. This is equivalent to -fno-freestanding. -ffreestanding Assert that compilation takes place in a freestanding environment. This implies -fno-builtin. A freestand- ing environment is one in which the standard library may not exist, and program startup may not necessarily be at "main". The most obvious example is an OS ker- nel. This is equivalent to -fno-hosted. -trigraphs Support ISO C trigraphs. The -ansi option (and -std options for strict ISO C conformance) implies -tri- graphs. -traditional Attempt to support some aspects of traditional C com- pilers. Specifically: o All "extern" declarations take effect globally even if they are written inside of a function def- inition. This includes implicit declarations of functions. o The newer keywords "typeof", "inline", "signed", "const" and "volatile" are not recognized. (You can still use the alternative keywords such as "__typeof__", "__inline__", and so on.) o Comparisons between pointers and integers are always allowed. o Integer types "unsigned short" and "unsigned char" promote to "unsigned int". o Out-of-range floating point literals are not an error. o Certain constructs which ISO regards as a single invalid preprocessing number, such as 0xe-0xd, are treated as expressions instead. o String ``constants'' are not necessarily constant; they are stored in writable space, and identical looking constants are allocated separately. (This is the same as the effect of -fwritable-strings.) o All automatic variables not declared "register" are preserved by "longjmp". Ordinarily, GNU C follows ISO C: automatic variables not declared "volatile" may be clobbered. o The character escape sequences \x and \a evaluate as the literal characters x and a respectively. Without -traditional, \x is a prefix for the hex- adecimal representation of a character, and \a produces a bell. You may wish to use -fno-builtin as well as -tradi- tional if your program uses names that are normally GNU C built-in functions for other purposes of its own. You cannot use -traditional if you include any header files that rely on ISO C features. Some vendors are starting to ship systems with ISO C header files and you cannot use -traditional on such systems to compile files that include any system headers. The -traditional option also enables -traditional-cpp, which is described next. -traditional-cpp Attempt to support some aspects of traditional C pre- processors. Specifically: o Comments convert to nothing at all, rather than to a space. This allows traditional token concatena- tion. o In a preprocessing directive, the # symbol must appear as the first character of a line. o Macro arguments are recognized within string con- stants in a macro definition (and their values are stringified, though without additional quote marks, when they appear in such a context). The preprocessor always considers a string constant to end at a newline. o The predefined macro "__STDC__" is not defined when you use -traditional, but "__GNUC__" is (since the GNU extensions which "__GNUC__" indi- cates are not affected by -traditional). If you need to write header files that work differently depending on whether -traditional is in use, by testing both of these predefined macros you can distinguish four situations: GNU C, traditional GNU C, other ISO C compilers, and other old C com- pilers. The predefined macro "__STDC_VERSION__" is also not defined when you use -traditional. o The preprocessor considers a string constant to end at a newline (unless the newline is escaped with \). (Without -traditional, string constants can contain the newline character as typed.) -fcond-mismatch Allow conditional expressions with mismatched types in the second and third arguments. The value of such an expression is void. This option is not supported for C++. -funsigned-char Let the type "char" be unsigned, like "unsigned char". Each kind of machine has a default for what "char" should be. It is either like "unsigned char" by default or like "signed char" by default. Ideally, a portable program should always use "signed char" or "unsigned char" when it depends on the signedness of an object. But many programs have been written to use plain "char" and expect it to be signed, or expect it to be unsigned, depending on the machines they were written for. This option, and its inverse, let you make such a program work with the opposite default. The type "char" is always a distinct type from each of "signed char" or "unsigned char", even though its behavior is always just like one of those two. -fsigned-char Let the type "char" be signed, like "signed char". Note that this is equivalent to -fno-unsigned-char, which is the negative form of -funsigned-char. Like- wise, the option -fno-signed-char is equivalent to -funsigned-char. -fsigned-bitfields -funsigned-bitfields -fno-signed-bitfields -fno-unsigned-bitfields These options control whether a bit-field is signed or unsigned, when the declaration does not use either "signed" or "unsigned". By default, such a bit-field is signed, because this is consistent: the basic inte- ger types such as "int" are signed types. However, when -traditional is used, bit-fields are all unsigned no matter what. -fwritable-strings Store string constants in the writable data segment and don't uniquize them. This is for compatibility with old programs which assume they can write into string constants. The option -traditional also has this effect. Writing into string constants is a very bad idea; ``constants'' should be constant. -fallow-single-precision Do not promote single precision math operations to double precision, even when compiling with -tradi- tional. Traditional K&R C promotes all floating point opera- tions to double precision, regardless of the sizes of the operands. On the architecture for which you are compiling, single precision may be faster than double precision. If you must use -traditional, but want to use single precision operations when the operands are single precision, use this option. This option has no effect when compiling with ISO or GNU C conventions (the default). -fshort-wchar Override the underlying type for wchar_t to be short unsigned int instead of the default for the target. This option is useful for building programs to run under WINE. Options Controlling C++ Dialect This section describes the command-line options that are only meaningful for C++ programs; but you can also use most of the GNU compiler options regardless of what lan- guage your program is in. For example, you might compile a file "firstClass.C" like this: g++ -g -frepo -O -c firstClass.C In this example, only -frepo is an option meant only for C++ programs; you can use the other options with any lan- guage supported by GCC. Here is a list of options that are only for compiling C++ programs: -fno-access-control Turn off all access checking. This switch is mainly useful for working around bugs in the access control code. -fcheck-new Check that the pointer returned by "operator new" is non-null before attempting to modify the storage allo- cated. The current Working Paper requires that "oper- ator new" never return a null pointer, so this check is normally unnecessary. An alternative to using this option is to specify that your "operator new" does not throw any exceptions; if you declare it throw(), G++ will check the return value. See also new (nothrow). -fconserve-space Put uninitialized or runtime-initialized global vari- ables into the common segment, as C does. This saves space in the executable at the cost of not diagnosing duplicate definitions. If you compile with this flag and your program mysteriously crashes after "main()" has completed, you may have an object that is being destroyed twice because two definitions were merged. This option is no longer useful on most targets, now that support has been added for putting variables into BSS without making them common. -fno-const-strings Give string constants type "char *" instead of type "const char *". By default, G++ uses type "const char *" as required by the standard. Even if you use -fno-const-strings, you cannot actually modify the value of a string constant, unless you also use -fwritable-strings. This option might be removed in a future release of G++. For maximum portability, you should structure your code so that it works with string constants that have type "const char *". -fdollars-in-identifiers Accept $ in identifiers. You can also explicitly pro- hibit use of $ with the option -fno-dollars-in-identi- fiers. (GNU C allows $ by default on most target sys- tems, but there are a few exceptions.) Traditional C allowed the character $ to form part of identifiers. However, ISO C and C++ forbid $ in identifiers. -fno-elide-constructors The C++ standard allows an implementation to omit cre- ating a temporary which is only used to initialize another object of the same type. Specifying this option disables that optimization, and forces G++ to call the copy constructor in all cases. -fno-enforce-eh-specs Don't check for violation of exception specifications at runtime. This option violates the C++ standard, but may be useful for reducing code size in production builds, much like defining NDEBUG. The compiler will still optimize based on the exception specifications. -fexternal-templates Cause template instantiations to obey #pragma inter- face and implementation; template instances are emit- ted or not according to the location of the template definition. This option is deprecated. -falt-external-templates Similar to -fexternal-templates, but template instances are emitted or not according to the place where they are first instantiated. This option is deprecated. -ffor-scope -fno-for-scope If -ffor-scope is specified, the scope of variables declared in a for-init-statement is limited to the for loop itself, as specified by the C++ standard. If -fno-for-scope is specified, the scope of variables declared in a for-init-statement extends to the end of the enclosing scope, as was the case in old versions of G++, and other (traditional) implementations of C++. The default if neither flag is given to follow the standard, but to allow and give a warning for old- style code that would otherwise be invalid, or have different behavior. -fno-gnu-keywords Do not recognize "typeof" as a keyword, so that code can use this word as an identifier. You can use the keyword "__typeof__" instead. -ansi implies -fno-gnu-keywords. -fno-implicit-templates Never emit code for non-inline templates which are instantiated implicitly (i.e. by use); only emit code for explicit instantiations. -fno-implicit-inline-templates Don't emit code for implicit instantiations of inline templates, either. The default is to handle inlines differently so that compiles with and without opti- mization will need the same set of explicit instantia- tions. -fno-implement-inlines To save space, do not emit out-of-line copies of inline functions controlled by #pragma implementation. This will cause linker errors if these functions are not inlined everywhere they are called. -fms-extensions Disable pedantic warnings about constructs used in MFC, such as implicit int and getting a pointer to member function via non-standard syntax. -fno-nonansi-builtins Disable built-in declarations of functions that are not mandated by ANSI/ISO C. These include "ffs", "alloca", "_exit", "index", "bzero", "conjf", and other related functions. -fno-operator-names Do not treat the operator name keywords "and", "bitand", "bitor", "compl", "not", "or" and "xor" as synonyms as keywords. -fno-optional-diags Disable diagnostics that the standard says a compiler does not need to issue. Currently, the only such diagnostic issued by G++ is the one for a name having multiple meanings within a class. -fpermissive Downgrade messages about nonconformant code from errors to warnings. By default, G++ effectively sets -pedantic-errors without -pedantic; this option reverses that. This behavior and this option are superseded by -pedantic, which works as it does for GNU C. -frepo Enable automatic template instantiation. This option also implies -fno-implicit-templates. -fno-rtti Disable generation of information about every class with virtual functions for use by the C++ runtime type identification features (dynamic_cast and typeid). If you don't use those parts of the language, you can save some space by using this flag. Note that excep- tion handling uses the same information, but it will generate it as needed. -fstats Emit statistics about front-end processing at the end of the compilation. This information is generally only useful to the G++ development team. -ftemplate-depth-n Set the maximum instantiation depth for template classes to n. A limit on the template instantiation depth is needed to detect endless recursions during template class instantiation. ANSI/ISO C++ conforming programs must not rely on a maximum depth greater than 17. -fuse-cxa-atexit Register destructors for objects with static storage duration with the "__cxa_atexit" function rather than the "atexit" function. This option is required for fully standards-compliant handling of static destruc- tors, but will only work if your C library supports "__cxa_atexit". -fno-weak Do not use weak symbol support, even if it is provided by the linker. By default, G++ will use weak symbols if they are available. This option exists only for testing, and should not be used by end-users; it will result in inferior code and has no benefits. This option may be removed in a future release of G++. -nostdinc++ Do not search for header files in the standard direc- tories specific to C++, but do still search the other standard directories. (This option is used when building the C++ library.) In addition, these optimization, warning, and code genera- tion options have meanings only for C++ programs: -fno-default-inline Do not assume inline for functions defined inside a class scope. Note that these functions will have linkage like inline functions; they just won't be inlined by default. -Wctor-dtor-privacy (C++ only) Warn when a class seems unusable, because all the con- structors or destructors in a class are private and the class has no friends or public static member func- tions. -Wnon-virtual-dtor (C++ only) Warn when a class declares a non-virtual destructor that should probably be virtual, because it looks like the class will be used polymorphically. -Wreorder (C++ only) Warn when the order of member initializers given in the code does not match the order in which they must be executed. For instance: struct A { int i; int j; A(): j (0), i (1) { } }; Here the compiler will warn that the member initializ- ers for i and j will be rearranged to match the decla- ration order of the members. The following -W... options are not affected by -Wall. -Weffc++ (C++ only) Warn about violations of various style guidelines from Scott Meyers' Effective C++ books. If you use this option, you should be aware that the standard library headers do not obey all of these guidelines; you can use grep -v to filter out those warnings. -Wno-deprecated (C++ only) Do not warn about usage of deprecated features. -Wno-non-template-friend (C++ only) Disable warnings when non-templatized friend functions are declared within a template. With the advent of explicit template specification support in G++, if the name of the friend is an unqualified-id (i.e., friend foo(o)), the C++ language specification demands that the friend declare or define an ordinary, nontemplate function. (Section 14.5.3). Before G++ implemented explicit specification, unqualified-ids could be interpreted as a particular specialization of a tem- platized function. Because this non-conforming behav- ior is no longer the default behavior for G++, -Wnon-template-friend allows the compiler to check existing code for potential trouble spots, and is on by default. This new compiler behavior can be turned off with -Wno-non-template-friend which keeps the con- formant compiler code but disables the helpful warn- ing. -Wold-style-cast (C++ only) Warn if an old-style (C-style) cast is used within a C++ program. The new-style casts (static_cast, rein- terpret_cast, and const_cast) are less vulnerable to unintended effects, and much easier to grep for. -Woverloaded-virtual (C++ only) Warn when a derived class function declaration may be an error in defining a virtual function. In a derived class, the definitions of virtual functions must match the type signature of a virtual function declared in the base class. With this option, the compiler warns when you define a function with the same name as a virtual function, but with a type signature that does not match any declarations from the base class. -Wno-pmf-conversions (C++ only) Disable the diagnostic for converting a bound pointer to member function to a plain pointer. -Wsign-promo (C++ only) Warn when overload resolution chooses a promotion from unsigned or enumeral type to a signed type over a con- version to an unsigned type of the same size. Previ- ous versions of G++ would try to preserve unsigned- ness, but the standard mandates the current behavior. -Wsynth (C++ only) Warn when G++'s synthesis behavior does not match that of cfront. For instance: struct A { operator int (); A& operator = (int); }; main () { A a,b; a = b; } In this example, G++ will synthesize a default A& operator = (const A&);, while cfront will use the user-defined operator =. Options Controlling Objective-C Dialect This section describes the command-line options that are only meaningful for Objective-C programs; but you can also use most of the GNU compiler options regardless of what language your program is in. For example, you might com- pile a file "some_class.m" like this: gcc -g -fgnu-runtime -O -c some_class.m In this example, only -fgnu-runtime is an option meant only for Objective-C programs; you can use the other options with any language supported by GCC. Here is a list of options that are only for compiling Objective-C programs: -fconstant-string-class=class-name Use class-name as the name of the class to instantiate for each literal string specified with the syntax "@"..."". The default class name is "NXCon- stantString". -fgnu-runtime Generate object code compatible with the standard GNU Objective-C runtime. This is the default for most types of systems. -fnext-runtime Generate output compatible with the NeXT runtime. This is the default for NeXT-based systems, including Darwin and Mac OS X. -gen-decls Dump interface declarations for all classes seen in the source file to a file named sourcename.decl. -Wno-protocol Do not warn if methods required by a protocol are not implemented in the class adopting it. -Wselector Warn if a selector has multiple methods of different types defined. Options to Control Diagnostic Messages Formatting Traditionally, diagnostic messages have been formatted irrespective of the output device's aspect (e.g. its width, ...). The options described below can be used to control the diagnostic messages formatting algorithm, e.g. how many characters per line, how often source location information should be reported. Right now, only the C++ front end can honor these options. However it is expected, in the near future, that the remaining front ends would be able to digest them correctly. -fmessage-length=n Try to format error messages so that they fit on lines of about n characters. The default is 72 characters for g++ and 0 for the rest of the front ends supported by GCC. If n is zero, then no line-wrapping will be done; each error message will appear on a single line. -fdiagnostics-show-location=once Only meaningful in line-wrapping mode. Instructs the diagnostic messages reporter to emit once source loca- tion information; that is, in case the message is too long to fit on a single physical line and has to be wrapped, the source location won't be emitted (as pre- fix) again, over and over, in subsequent continuation lines. This is the default behaviour. -fdiagnostics-show-location=every-line Only meaningful in line-wrapping mode. Instructs the diagnostic messages reporter to emit the same source location information (as prefix) for physical lines that result from the process of breaking a message which is too long to fit on a single line. Options to Request or Suppress Warnings Warnings are diagnostic messages that report constructions which are not inherently erroneous but which are risky or suggest there may have been an error. You can request many specific warnings with options begin- ning -W, for example -Wimplicit to request warnings on implicit declarations. Each of these specific warning options also has a negative form beginning -Wno- to turn off warnings; for example, -Wno-implicit. This manual lists only one of the two forms, whichever is not the default. These options control the amount and kinds of warnings produced by GCC: -fsyntax-only Check the code for syntax errors, but don't do any- thing beyond that. -pedantic Issue all the warnings demanded by strict ISO C and ISO C++; reject all programs that use forbidden exten- sions, and some other programs that do not follow ISO C and ISO C++. For ISO C, follows the version of the ISO C standard specified by any -std option used. Valid ISO C and ISO C++ programs should compile prop- erly with or without this option (though a rare few will require -ansi or a -std option specifying the required version of ISO C). However, without this option, certain GNU extensions and traditional C and C++ features are supported as well. With this option, they are rejected. -pedantic does not cause warning messages for use of the alternate keywords whose names begin and end with __. Pedantic warnings are also disabled in the expression that follows "__extension__". However, only system header files should use these escape routes; application programs should avoid them. Some users try to use -pedantic to check programs for strict ISO C conformance. They soon find that it does not do quite what they want: it finds some non-ISO practices, but not all---only those for which ISO C requires a diagnostic, and some others for which diagnostics have been added. A feature to report any failure to conform to ISO C might be useful in some instances, but would require considerable additional work and would be quite dif- ferent from -pedantic. We don't have plans to support such a feature in the near future. Where the standard specified with -std represents a GNU extended dialect of C, such as gnu89 or gnu99, there is a corresponding base standard, the version of ISO C on which the GNU extended dialect is based. Warnings from -pedantic are given where they are required by the base standard. (It would not make sense for such warnings to be given only for features not in the specified GNU C dialect, since by defini- tion the GNU dialects of C include all features the compiler supports with the given option, and there would be nothing to warn about.) -pedantic-errors Like -pedantic, except that errors are produced rather than warnings. -w Inhibit all warning messages. -Wno-import Inhibit warning messages about the use of #import. -Wchar-subscripts Warn if an array subscript has type "char". This is a common cause of error, as programmers often forget that this type is signed on some machines. -Wcomment Warn whenever a comment-start sequence /* appears in a /* comment, or whenever a Backslash-Newline appears in a // comment. -Wformat Check calls to "printf" and "scanf", etc., to make sure that the arguments supplied have types appropri- ate to the format string specified, and that the con- versions specified in the format string make sense. This includes standard functions, and others specified by format attributes, in the "printf", "scanf", "strf- time" and "strfmon" (an X/Open extension, not in the C standard) families. The formats are checked against the format features supported by GNU libc version 2.2. These include all ISO C89 and C99 features, as well as features from the Single Unix Specification and some BSD and GNU exten- sions. Other library implementations may not support all these features; GCC does not support warning about features that go beyond a particular library's limita- tions. However, if -pedantic is used with -Wformat, warnings will be given about format features not in the selected standard version (but not for "strfmon" formats, since those are not in any version of the C standard). -Wformat is included in -Wall. For more control over some aspects of format checking, the options -Wno-for- mat-y2k, -Wno-format-extra-args, -Wformat-nonliteral, -Wformat-security and -Wformat=2 are available, but are not included in -Wall. -Wno-format-y2k If -Wformat is specified, do not warn about "strftime" formats which may yield only a two-digit year. -Wno-format-extra-args If -Wformat is specified, do not warn about excess arguments to a "printf" or "scanf" format function. The C standard specifies that such arguments are ignored. -Wformat-nonliteral If -Wformat is specified, also warn if the format string is not a string literal and so cannot be checked, unless the format function takes its format arguments as a "va_list". -Wformat-security If -Wformat is specified, also warn about uses of for- mat functions that represent possible security prob- lems. At present, this warns about calls to "printf" and "scanf" functions where the format string is not a string literal and there are no format arguments, as in "printf (foo);". This may be a security hole if the format string came from untrusted input and con- tains %n. (This is currently a subset of what -Wfor- mat-nonliteral warns about, but in future warnings may be added to -Wformat-security that are not included in -Wformat-nonliteral.) -Wformat=2 Enable -Wformat plus format checks not included in -Wformat. Currently equivalent to -Wformat -Wfor- mat-nonliteral -Wformat-security. -Wimplicit-int Warn when a declaration does not specify a type. -Wimplicit-function-declaration -Werror-implicit-function-declaration Give a warning (or error) whenever a function is used before being declared. -Wimplicit Same as -Wimplicit-int and -Wimplicit-function-decla- ration. -Wmain Warn if the type of main is suspicious. main should be a function with external linkage, returning int, taking either zero arguments, two, or three arguments of appropriate types. -Wmissing-braces Warn if an aggregate or union initializer is not fully bracketed. In the following example, the initializer for a is not fully bracketed, but that for b is fully bracketed. int a[2][2] = { 0, 1, 2, 3 }; int b[2][2] = { { 0, 1 }, { 2, 3 } }; -Wmultichar Warn if a multicharacter constant ('FOOF') is used. Usually they indicate a typo in the user's code, as they have implementation-defined values, and should not be used in portable code. -Wparentheses Warn if parentheses are omitted in certain contexts, such as when there is an assignment in a context where a truth value is expected, or when operators are nested whose precedence people often get confused about. Also warn about constructions where there may be con- fusion to which "if" statement an "else" branch belongs. Here is an example of such a case: { if (a) if (b) foo (); else bar (); } In C, every "else" branch belongs to the innermost possible "if" statement, which in this example is "if (b)". This is often not what the programmer expected, as illustrated in the above example by indentation the programmer chose. When there is the potential for this confusion, GCC will issue a warning when this flag is specified. To eliminate the warning, add explicit braces around the innermost "if" statement so there is no way the "else" could belong to the enclos- ing "if". The resulting code would look like this: { if (a) { if (b) foo (); else bar (); } } -Wsequence-point Warn about code that may have undefined semantics because of violations of sequence point rules in the C standard. The C standard defines the order in which expressions in a C program are evaluated in terms of sequence points, which represent a partial ordering between the execution of parts of the program: those executed before the sequence point, and those executed after it. These occur after the evaluation of a full expression (one which is not part of a larger expres- sion), after the evaluation of the first operand of a "&&", "||", "? :" or "," (comma) operator, before a function is called (but after the evaluation of its arguments and the expression denoting the called func- tion), and in certain other places. Other than as expressed by the sequence point rules, the order of evaluation of subexpressions of an expression is not specified. All these rules describe only a partial order rather than a total order, since, for example, if two functions are called within one expression with no sequence point between them, the order in which the functions are called is not specified. However, the standards committee have ruled that function calls do not overlap. It is not specified when between sequence points modi- fications to the values of objects take effect. Pro- grams whose behavior depends on this have undefined behavior; the C standard specifies that ``Between the previous and next sequence point an object shall have its stored value modified at most once by the evalua- tion of an expression. Furthermore, the prior value shall be read only to determine the value to be stored.''. If a program breaks these rules, the results on any particular implementation are entirely unpredictable. Examples of code with undefined behavior are "a = a++;", "a[n] = b[n++]" and "a[i++] = i;". Some more complicated cases are not diagnosed by this option, and it may give an occasional false positive result, but in general it has been found fairly effective at detecting this sort of problem in programs. The present implementation of this option only works for C programs. A future implementation may also work for C++ programs. There is some controversy over the precise meaning of the sequence point rules in subtle cases. Links to papers with alternative formal definitions and other related discussions may be found on our readings page <http://gcc.gnu.org/readings.html>. -Wreturn-type Warn whenever a function is defined with a return-type that defaults to "int". Also warn about any "return" statement with no return-value in a function whose return-type is not "void". For C++, a function without return type always pro- duces a diagnostic message, even when -Wno-return-type is specified. The only exceptions are main and func- tions defined in system headers. -Wswitch Warn whenever a "switch" statement has an index of enumeral type and lacks a "case" for one or more of the named codes of that enumeration. (The presence of a "default" label prevents this warning.) "case" labels outside the enumeration range also provoke warnings when this option is used. -Wtrigraphs Warn if any trigraphs are encountered that might change the meaning of the program (trigraphs within comments are not warned about). -Wunused-function Warn whenever a static function is declared but not defined or a non\-inline static function is unused. -Wunused-label Warn whenever a label is declared but not used. To suppress this warning use the unused attribute. -Wunused-parameter Warn whenever a function parameter is unused aside from its declaration. To suppress this warning use the unused attribute. -Wunused-variable Warn whenever a local variable or non-constant static variable is unused aside from its declaration To suppress this warning use the unused attribute. -Wunused-value Warn whenever a statement computes a result that is explicitly not used. To suppress this warning cast the expression to void. -Wunused All all the above -Wunused options combined. In order to get a warning about an unused function parameter, you must either specify -W -Wunused or sep- arately specify -Wunused-parameter. -Wuninitialized Warn if an automatic variable is used without first being initialized or if a variable may be clobbered by a "setjmp" call. These warnings are possible only in optimizing compi- lation, because they require data flow information that is computed only when optimizing. If you don't specify -O, you simply won't get these warnings. These warnings occur only for variables that are can- didates for register allocation. Therefore, they do not occur for a variable that is declared "volatile", or whose address is taken, or whose size is other than 1, 2, 4 or 8 bytes. Also, they do not occur for structures, unions or arrays, even when they are in registers. Note that there may be no warning about a variable that is used only to compute a value that itself is never used, because such computations may be deleted by data flow analysis before the warnings are printed. These warnings are made optional because GCC is not smart enough to see all the reasons why the code might be correct despite appearing to have an error. Here is one example of how this can happen: { int x; switch (y) { case 1: x = 1; break; case 2: x = 4; break; case 3: x = 5; } foo (x); } If the value of "y" is always 1, 2 or 3, then "x" is always initialized, but GCC doesn't know this. Here is another common case: { int save_y; if (change_y) save_y = y, y = new_y; ... if (change_y) y = save_y; } This has no bug because "save_y" is used only if it is set. This option also warns when a non-volatile automatic variable might be changed by a call to "longjmp". These warnings as well are possible only in optimizing compilation. The compiler sees only the calls to "setjmp". It can- not know where "longjmp" will be called; in fact, a signal handler could call it at any point in the code. As a result, you may get a warning even when there is in fact no problem because "longjmp" cannot in fact be called at the place which would cause a problem. Some spurious warnings can be avoided if you declare all the functions you use that never return as "nore- turn". -Wreorder (C++ only) Warn when the order of member initializers given in the code does not match the order in which they must be executed. For instance: -Wunknown-pragmas Warn when a #pragma directive is encountered which is not understood by GCC. If this command line option is used, warnings will even be issued for unknown pragmas in system header files. This is not the case if the warnings were only enabled by the -Wall command line option. -Wall All of the above -W options combined. This enables all the warnings about constructions that some users consider questionable, and that are easy to avoid (or modify to prevent the warning), even in conjunction with macros. -Wsystem-headers Print warning messages for constructs found in system header files. Warnings from system headers are normally suppressed, on the assumption that they usu- ally do not indicate real problems and would only make the compiler output harder to read. Using this com- mand line option tells GCC to emit warnings from sys- tem headers as if they occurred in user code. How- ever, note that using -Wall in conjunction with this option will not warn about unknown pragmas in system headers---for that, -Wunknown-pragmas must also be used. The following -W... options are not implied by -Wall. Some of them warn about constructions that users generally do not consider questionable, but which occasionally you might wish to check for; others warn about constructions that are necessary or hard to avoid in some cases, and there is no simple way to modify the code to suppress the warning. -W Print extra warning messages for these events: o A function can return either with or without a value. (Falling off the end of the function body is considered returning without a value.) For example, this function would evoke such a warning: foo (a) { if (a > 0) return a; } o An expression-statement or the left-hand side of a comma expression contains no side effects. To suppress the warning, cast the unused expression to void. For example, an expression such as x[i,j] will cause a warning, but x[(void)i,j] will not. o An unsigned value is compared against zero with < or <=. o A comparison like x<=y<=z appears; this is equiva- lent to (x<=y ? 1 : 0) <= z, which is a different interpretation from that of ordinary mathematical notation. o Storage-class specifiers like "static" are not the first things in a declaration. According to the C Standard, this usage is obsolescent. o The return type of a function has a type qualifier such as "const". Such a type qualifier has no effect, since the value returned by a function is not an lvalue. (But don't warn about the GNU extension of "volatile void" return types. That extension will be warned about if -pedantic is specified.) o If -Wall or -Wunused is also specified, warn about unused arguments. o A comparison between signed and unsigned values could produce an incorrect result when the signed value is converted to unsigned. (But don't warn if -Wno-sign-compare is also specified.) o An aggregate has a partly bracketed initializer. For example, the following code would evoke such a warning, because braces are missing around the initializer for "x.h": struct s { int f, g; }; struct t { struct s h; int i; }; struct t x = { 1, 2, 3 }; o An aggregate has an initializer which does not initialize all members. For example, the follow- ing code would cause such a warning, because "x.h" would be implicitly initialized to zero: struct s { int f, g, h; }; struct s x = { 3, 4 }; -Wfloat-equal Warn if floating point values are used in equality comparisons. The idea behind this is that sometimes it is conve- nient (for the programmer) to consider floating-point values as approximations to infinitely precise real numbers. If you are doing this, then you need to com- pute (by analysing the code, or in some other way) the maximum or likely maximum error that the computation introduces, and allow for it when performing compar- isons (and when producing output, but that's a differ- ent problem). In particular, instead of testing for equality, you would check to see whether the two val- ues have ranges that overlap; and this is done with the relational operators, so equality comparisons are probably mistaken. -Wtraditional (C only) Warn about certain constructs that behave differently in traditional and ISO C. Also warn about ISO C con- structs that have no traditional C equivalent, and/or problematic constructs which should be avoided. o Macro parameters that appear within string liter- als in the macro body. In traditional C macro replacement takes place within string literals, but does not in ISO C. o In traditional C, some preprocessor directives did not exist. Traditional preprocessors would only consider a line to be a directive if the # appeared in column 1 on the line. Therefore -Wtraditional warns about directives that tradi- tional C understands but would ignore because the # does not appear as the first character on the line. It also suggests you hide directives like #pragma not understood by traditional C by indent- ing them. Some traditional implementations would not recognise #elif, so it suggests avoiding it altogether. o A function-like macro that appears without argu- ments. o The unary plus operator. o The U integer constant suffix, or the F or L floating point constant suffixes. (Traditional C does support the L suffix on integer constants.) Note, these suffixes appear in macros defined in the system headers of most modern systems, e.g. the _MIN/_MAX macros in "<limits.h>". Use of these macros in user code might normally lead to spurious warnings, however gcc's integrated pre- processor has enough context to avoid warning in these cases. o A function declared external in one block and then used after the end of the block. o A "switch" statement has an operand of type "long". o A non-"static" function declaration follows a "static" one. This construct is not accepted by some traditional C compilers. o The ISO type of an integer constant has a differ- ent width or signedness from its traditional type. This warning is only issued if the base of the constant is ten. I.e. hexadecimal or octal val- ues, which typically represent bit patterns, are not warned about. o Usage of ISO string concatenation is detected. o Initialization of automatic aggregates. o Identifier conflicts with labels. Traditional C lacks a separate namespace for labels. o Initialization of unions. If the initializer is zero, the warning is omitted. This is done under the assumption that the zero initializer in user code appears conditioned on e.g. "__STDC__" to avoid missing initializer warnings and relies on default initialization to zero in the traditional C case. o Conversions by prototypes between fixed/floating point values and vice versa. The absence of these prototypes when compiling with traditional C would cause serious problems. This is a subset of the possible conversion warnings, for the full set use -Wconversion. -Wundef Warn if an undefined identifier is evaluated in an #if directive. -Wshadow Warn whenever a local variable shadows another local variable, parameter or global variable or whenever a built-in function is shadowed. -Wid-clash-len Warn whenever two distinct identifiers match in the first len characters. This may help you prepare a program that will compile with certain obsolete, brain-damaged compilers. -Wlarger-than-len Warn whenever an object of larger than len bytes is defined. -Wpointer-arith Warn about anything that depends on the ``size of'' a function type or of "void". GNU C assigns these types a size of 1, for convenience in calculations with "void *" pointers and pointers to functions. -Wbad-function-cast (C only) Warn whenever a function call is cast to a non-match- ing type. For example, warn if "int malloc()" is cast to "anything *". -Wcast-qual Warn whenever a pointer is cast so as to remove a type qualifier from the target type. For example, warn if a "const char *" is cast to an ordinary "char *". -Wcast-align Warn whenever a pointer is cast such that the required alignment of the target is increased. For example, warn if a "char *" is cast to an "int *" on machines where integers can only be accessed at two- or four- byte boundaries. -Wwrite-strings When compiling C, give string constants the type "const char[length]" so that copying the address of one into a non-"const" "char *" pointer will get a warning; when compiling C++, warn about the deprecated conversion from string constants to "char *". These warnings will help you find at compile time code that can try to write into a string constant, but only if you have been very careful about using "const" in dec- larations and prototypes. Otherwise, it will just be a nuisance; this is why we did not make -Wall request these warnings. -Wconversion Warn if a prototype causes a type conversion that is different from what would happen to the same argument in the absence of a prototype. This includes conver- sions of fixed point to floating and vice versa, and conversions changing the width or signedness of a fixed point argument except when the same as the default promotion. Also, warn if a negative integer constant expression is implicitly converted to an unsigned type. For example, warn about the assignment "x = -1" if "x" is unsigned. But do not warn about explicit casts like "(unsigned) -1". -Wsign-compare Warn when a comparison between signed and unsigned values could produce an incorrect result when the signed value is converted to unsigned. This warning is also enabled by -W; to get the other warnings of -W without this warning, use -W -Wno-sign-compare. -Waggregate-return Warn if any functions that return structures or unions are defined or called. (In languages where you can return an array, this also elicits a warning.) -Wstrict-prototypes (C only) Warn if a function is declared or defined without specifying the argument types. (An old-style function definition is permitted without a warning if preceded by a declaration which specifies the argument types.) -Wmissing-prototypes (C only) Warn if a global function is defined without a previ- ous prototype declaration. This warning is issued even if the definition itself provides a prototype. The aim is to detect global functions that fail to be declared in header files. -Wmissing-declarations Warn if a global function is defined without a previ- ous declaration. Do so even if the definition itself provides a prototype. Use this option to detect global functions that are not declared in header files. -Wmissing-noreturn Warn about functions which might be candidates for attribute "noreturn". Note these are only possible candidates, not absolute ones. Care should be taken to manually verify functions actually do not ever return before adding the "noreturn" attribute, other- wise subtle code generation bugs could be introduced. You will not get a warning for "main" in hosted C environments. -Wmissing-format-attribute If -Wformat is enabled, also warn about functions which might be candidates for "format" attributes. Note these are only possible candidates, not absolute ones. GCC will guess that "format" attributes might be appropriate for any function that calls a function like "vprintf" or "vscanf", but this might not always be the case, and some functions for which "format" attributes are appropriate may not be detected. This option has no effect unless -Wformat is enabled (pos- sibly by -Wall). -Wpacked Warn if a structure is given the packed attribute, but the packed attribute has no effect on the layout or size of the structure. Such structures may be mis- aligned for little benefit. For instance, in this code, the variable "f.x" in "struct bar" will be mis- aligned even though "struct bar" does not itself have the packed attribute: struct foo { int x; char a, b, c, d; } __attribute__((packed)); struct bar { char z; struct foo f; }; -Wpadded Warn if padding is included in a structure, either to align an element of the structure or to align the whole structure. Sometimes when this happens it is possible to rearrange the fields of the structure to reduce the padding and so make the structure smaller. -Wredundant-decls Warn if anything is declared more than once in the same scope, even in cases where multiple declaration is valid and changes nothing. -Wnested-externs (C only) Warn if an "extern" declaration is encountered within a function. -Wunreachable-code Warn if the compiler detects that code will never be executed. This option is intended to warn when the compiler detects that at least a whole line of source code will never be executed, because some condition is never satisfied or because it is after a procedure that never returns. It is possible for this option to produce a warning even though there are circumstances under which part of the affected line can be executed, so care should be taken when removing apparently-unreachable code. For instance, when a function is inlined, a warning may mean that the line is unreachable in only one inlined copy of the function. This option is not made part of -Wall because in a debugging version of a program there is often substan- tial code which checks correct functioning of the pro- gram and is, hopefully, unreachable because the pro- gram does work. Another common use of unreachable code is to provide behaviour which is selectable at compile-time. -Winline Warn if a function can not be inlined and it was declared as inline. -Wlong-long Warn if long long type is used. This is default. To inhibit the warning messages, use -Wno-long-long. Flags -Wlong-long and -Wno-long-long are taken into account only when -pedantic flag is used. -Wdisabled-optimization Warn if a requested optimization pass is disabled. This warning does not generally indicate that there is anything wrong with your code; it merely indicates that GCC's optimizers were unable to handle the code effectively. Often, the problem is that your code is too big or too complex; GCC will refuse to optimize programs when the optimization itself is likely to take inordinate amounts of time. -Werror Make all warnings into errors. Options for Debugging Your Program or GCC GCC has various special options that are used for debug- ging either your program or GCC: -g Produce debugging information in the operating sys- tem's native format (stabs, COFF, XCOFF, or DWARF). GDB can work with this debugging information. On most systems that use stabs format, -g enables use of extra debugging information that only GDB can use; this extra information makes debugging work better in GDB but will probably make other debuggers crash or refuse to read the program. If you want to control for certain whether to generate the extra information, use -gstabs+, -gstabs, -gxcoff+, -gxcoff, -gdwarf-1+, or -gdwarf-1 (see below). Unlike most other C compilers, GCC allows you to use -g with -O. The shortcuts taken by optimized code may occasionally produce surprising results: some vari- ables you declared may not exist at all; flow of con- trol may briefly move where you did not expect it; some statements may not be executed because they com- pute constant results or their values were already at hand; some statements may execute in different places because they were moved out of loops. Nevertheless it proves possible to debug optimized output. This makes it reasonable to use the optimizer for programs that might have bugs. The following options are useful when GCC is generated with the capability for more than one debugging for- mat. -ggdb Produce debugging information for use by GDB. This means to use the most expressive format available (DWARF 2, stabs, or the native format if neither of those are supported), including GDB extensions if at all possible. -gstabs Produce debugging information in stabs format (if that is supported), without GDB extensions. This is the format used by DBX on most BSD systems. On MIPS, Alpha and System V Release 4 systems this option pro- duces stabs debugging output which is not understood by DBX or SDB. On System V Release 4 systems this option requires the GNU assembler. -gstabs+ Produce debugging information in stabs format (if that is supported), using GNU extensions understood only by the GNU debugger (GDB). The use of these extensions is likely to make other debuggers crash or refuse to read the program. -gcoff Produce debugging information in COFF format (if that is supported). This is the format used by SDB on most System V systems prior to System V Release 4. -gxcoff Produce debugging information in XCOFF format (if that is supported). This is the format used by the DBX debugger on IBM RS/6000 systems. -gxcoff+ Produce debugging information in XCOFF format (if that is supported), using GNU extensions understood only by the GNU debugger (GDB). The use of these extensions is likely to make other debuggers crash or refuse to read the program, and may cause assemblers other than the GNU assembler (GAS) to fail with an error. -gdwarf Produce debugging information in DWARF version 1 for- mat (if that is supported). This is the format used by SDB on most System V Release 4 systems. -gdwarf+ Produce debugging information in DWARF version 1 for- mat (if that is supported), using GNU extensions understood only by the GNU debugger (GDB). The use of these extensions is likely to make other debuggers crash or refuse to read the program. -gdwarf-2 Produce debugging information in DWARF version 2 for- mat (if that is supported). This is the format used by DBX on IRIX 6. -glevel -ggdblevel -gstabslevel -gcofflevel -gxcofflevel -gdwarflevel -gdwarf-2level Request debugging information and also use level to specify how much information. The default level is 2. Level 1 produces minimal information, enough for mak- ing backtraces in parts of the program that you don't plan to debug. This includes descriptions of func- tions and external variables, but no information about local variables and no line numbers. Level 3 includes extra information, such as all the macro definitions present in the program. Some debug- gers support macro expansion when you use -g3. -p Generate extra code to write profile information suit- able for the analysis program "prof". You must use this option when compiling the source files you want data about, and you must also use it when linking. -pg Generate extra code to write profile information suit- able for the analysis program "gprof". You must use this option when compiling the source files you want data about, and you must also use it when linking. -a Generate extra code to write profile information for basic blocks, which will record the number of times each basic block is executed, the basic block start address, and the function name containing the basic block. If -g is used, the line number and filename of the start of the basic block will also be recorded. If not overridden by the machine description, the default action is to append to the text file bb.out. This data could be analyzed by a program like "tcov". Note, however, that the format of the data is not what "tcov" expects. Eventually GNU "gprof" should be extended to process this data. -Q Makes the compiler print out each function name as it is compiled, and print some statistics about each pass when it finishes. -ftime-report Makes the compiler print some statistics about the time consumed by each pass when it finishes. -fmem-report Makes the compiler print some statistics about perma- nent memory allocation when it finishes. -ax Generate extra code to profile basic blocks. Your executable will produce output that is a superset of that produced when -a is used. Additional output is the source and target address of the basic blocks where a jump takes place, the number of times a jump is executed, and (optionally) the complete sequence of basic blocks being executed. The output is appended to file bb.out. You can examine different profiling aspects without recompilation. Your executable will read a list of function names from file bb.in. Profiling starts when a function on the list is entered and stops when that invocation is exited. To exclude a function from pro- filing, prefix its name with -. If a function name is not unique, you can disambiguate it by writing it in the form /path/filename.d:functionname. Your exe- cutable will write the available paths and filenames in file bb.out. Several function names have a special meaning: "__bb_jumps__" Write source, target and frequency of jumps to file bb.out. "__bb_hidecall__" Exclude function calls from frequency count. "__bb_showret__" Include function returns in frequency count. "__bb_trace__" Write the sequence of basic blocks executed to file bbtrace.gz. The file will be compressed using the program gzip, which must exist in your PATH. On systems without the popen function, the file will be named bbtrace and will not be com- pressed. Profiling for even a few seconds on these systems will produce a very large file. Note: "__bb_hidecall__" and "__bb_showret__" will not affect the sequence written to bbtrace.gz. Here's a short example using different profiling parameters in file bb.in. Assume function "foo" con- sists of basic blocks 1 and 2 and is called twice from block 3 of function "main". After the calls, block 3 transfers control to block 4 of "main". With "__bb_trace__" and "main" contained in file bb.in, the following sequence of blocks is written to file bbtrace.gz: 0 3 1 2 1 2 4. The return from block 2 to block 3 is not shown, because the return is to a point inside the block and not to the top. The block address 0 always indicates, that control is trans- ferred to the trace from somewhere outside the observed functions. With -foo added to bb.in, the blocks of function "foo" are removed from the trace, so only 0 3 4 remains. With "__bb_jumps__" and "main" contained in file bb.in, jump frequencies will be written to file bb.out. The frequencies are obtained by constructing a trace of blocks and incrementing a counter for every neighbouring pair of blocks in the trace. The trace 0 3 1 2 1 2 4 displays the following frequencies: Jump from block 0x0 to block 0x3 executed 1 time(e) Jump from block 0x3 to block 0x1 executed 1 time(e) Jump from block 0x1 to block 0x2 executed 2 time(e) Jump from block 0x2 to block 0x1 executed 1 time(e) Jump from block 0x2 to block 0x4 executed 1 time(e) With "__bb_hidecall__", control transfer due to call instructions is removed from the trace, that is the trace is cut into three parts: 0 3 4, 0 1 2 and 0 1 2. With "__bb_showret__", control transfer due to return instructions is added to the trace. The trace becomes: 0 3 1 2 3 1 2 3 4. Note, that this trace is not the same, as the sequence written to bbtrace.gz. It is solely used for counting jump frequencies. -fprofile-arcs Instrument arcs during compilation. For each function of your program, GCC creates a program flow graph, then finds a spanning tree for the graph. Only arcs that are not on the spanning tree have to be instru- mented: the compiler adds code to count the number of times that these arcs are executed. When an arc is the only exit or only entrance to a block, the instru- mentation code can be added to the block; otherwise, a new basic block must be created to hold the instrumen- tation code. Since not every arc in the program must be instru- mented, programs compiled with this option run faster than programs compiled with -a, which adds instrumen- tation code to every basic block in the program. The tradeoff: since "gcov" does not have execution counts for all branches, it must start with the execution counts for the instrumented branches, and then iterate over the program flow graph until the entire graph has been solved. Hence, "gcov" runs a little more slowly than a program which uses information from -a. -fprofile-arcs also makes it possible to estimate branch probabilities, and to calculate basic block execution counts. In general, basic block execution counts do not give enough information to estimate all branch probabilities. When the compiled program exits, it saves the arc execution counts to a file called sourcename.da. Use the compiler option -fbranch-probabilities when recompiling, to optimize using estimated branch probabilities. -ftest-coverage Create data files for the "gcov" code-coverage util- ity. The data file names begin with the name of your source file: sourcename.bb A mapping from basic blocks to line numbers, which "gcov" uses to associate basic block execution counts with line numbers. sourcename.bbg A list of all arcs in the program flow graph. This allows "gcov" to reconstruct the program flow graph, so that it can compute all basic block and arc execution counts from the information in the "sourcename.da" file (this last file is the output from -fprofile-arcs). -dletters Says to make debugging dumps during compilation at times specified by letters. This is used for debug- ging the compiler. The file names for most of the dumps are made by appending a pass number and a word to the source file name (e.g. foo.c.00.rtl or foo.c.01.sibling). Here are the possible letters for use in letters, and their meanings: A Annotate the assembler output with miscellaneous debugging information. b Dump after computing branch probabilities, to file.11.bp. B Dump after block reordering, to file.26.bbro. c Dump after instruction combination, to the file file.14.combine. C Dump after the first if conversion, to the file file.15.ce. d Dump after delayed branch scheduling, to file.29.dbr. D Dump all macro definitions, at the end of prepro- cessing, in addition to normal output. e Dump after SSA optimizations, to file.05.ssa and file.06.ussa. E Dump after the second if conversion, to file.24.ce2. f Dump after life analysis, to file.13.life. F Dump after purging "ADDRESSOF" codes, to file.04.addressof. g Dump after global register allocation, to file.19.greg. o Dump after post-reload CSE and other optimiza- tions, to file.20.postreload. G Dump after GCSE, to file.08.gcse. i Dump after sibling call optimizations, to file.01.sibling. j Dump after the first jump optimization, to file.02.jump. J Dump after the last jump optimization, to file.27.jump2. k Dump after conversion from registers to stack, to file.29.stack. l Dump after local register allocation, to file.18.lreg. L Dump after loop optimization, to file.09.loop. M Dump after performing the machine dependent reor- ganisation pass, to file.28.mach. n Dump after register renumbering, to file.23.rnreg. N Dump after the register move pass, to file.16.reg- move. r Dump after RTL generation, to file.00.rtl. R Dump after the second instruction scheduling pass, to file.25.sched2. s Dump after CSE (including the jump optimization that sometimes follows CSE), to file.03.cse. S Dump after the first instruction scheduling pass, to file.17.sched. t Dump after the second CSE pass (including the jump optimization that sometimes follows CSE), to file.10.cse2. w Dump after the second flow pass, to file.21.flow2. X Dump after dead code elimination, to file.06.dce. z Dump after the peephole pass, to file.22.peep- hole2. a Produce all the dumps listed above. m Print statistics on memory usage, at the end of the run, to standard error. p Annotate the assembler output with a comment indi- cating which pattern and alternative was used. The length of each instruction is also printed. P Dump the RTL in the assembler output as a comment before each instruction. Also turns on -dp anno- tation. v For each of the other indicated dump files (except for file.00.rtl), dump a representation of the control flow graph suitable for viewing with VCG to file.pass.vcg. x Just generate RTL for a function instead of com- piling it. Usually used with r. y Dump debugging information during parsing, to standard error. -fdump-unnumbered When doing debugging dumps (see -d option above), sup- press instruction numbers and line number note output. This makes it more feasible to use diff on debugging dumps for compiler invocations with different options, in particular with and without -g. -fdump-translation-unit (C and C++ only) -fdump-translation-unit-number (C and C++ only) Dump a representation of the tree structure for the entire translation unit to a file. The file name is made by appending .tu to the source file name. If the -number form is used, number controls the details of the dump as described for the -fdump-tree options. -fdump-class-hierarchy (C++ only) -fdump-class-hierarchy-number (C++ only) Dump a representation of each class's hierarchy and virtual function table layout to a file. The file name is made by appending .class to the source file name. If the -number form is used, number controls the details of the dump as described for the -fdump-tree options. -fdump-ast-switch (C++ only) -fdump-ast-switch-number (C++ only) Control the dumping at various stages of processing the abstract syntax tree to a file. The file name is generated by appending a switch specific suffix to the source file name. If the -number form is used, number is a bit mask which controls the details of the dump. The following bits are meaningful (these are not set symbolically, as the primary function of these dumps is for debugging gcc itself): bit0 (1) Print the address of each node. Usually this is not meaningful as it changes according to the environment and source file. bit1 (2) Inhibit dumping of members of a scope or body of a function, unless they are reachable by some other path. The following tree dumps are possible: original Dump before any tree based optimization, to file.original. optimized Dump after all tree based optimization, to file.optimized. -fpretend-float When running a cross-compiler, pretend that the target machine uses the same floating point format as the host machine. This causes incorrect output of the actual floating constants, but the actual instruction sequence will probably be the same as GCC would make when running on the target machine. -save-temps Store the usual ``temporary'' intermediate files per- manently; place them in the current directory and name them based on the source file. Thus, compiling foo.c with -c -save-temps would produce files foo.i and foo.s, as well as foo.o. This creates a preprocessed foo.i output file even though the compiler now nor- mally uses an integrated preprocessor. -time Report the CPU time taken by each subprocess in the compilation sequence. For C source files, this is the compiler proper and assembler (plus the linker if linking is done). The output looks like this: # cc1 0.12 0.01 # as 0.00 0.01 The first number on each line is the ``user time,'' that is time spent executing the program itself. The second number is ``system time,'' time spent executing operating system routines on behalf of the program. Both numbers are in seconds. -print-file-name=library Print the full absolute name of the library file library that would be used when linking---and don't do anything else. With this option, GCC does not compile or link anything; it just prints the file name. -print-multi-directory Print the directory name corresponding to the multilib selected by any other switches present in the command line. This directory is supposed to exist in GCC_EXEC_PREFIX. -print-multi-lib Print the mapping from multilib directory names to compiler switches that enable them. The directory name is separated from the switches by ;, and each switch starts with an @} instead of the @samp{-, with- out spaces between multiple switches. This is sup- posed to ease shell-processing. -print-prog-name=program Like -print-file-name, but searches for a program such as cpp. -print-libgcc-file-name Same as -print-file-name=libgcc.a. This is useful when you use -nostdlib or -nodefault- libs but you do want to link with libgcc.a. You can do gcc -nostdlib <files>... `gcc -print-libgcc-file-name` -print-search-dirs Print the name of the configured installation direc- tory and a list of program and library directories gcc will search---and don't do anything else. This is useful when gcc prints the error message installation problem, cannot exec cpp0: No such file or directory. To resolve this you either need to put cpp0 and the other compiler components where gcc expects to find them, or you can set the environment variable GCC_EXEC_PREFIX to the directory where you installed them. Don't forget the trailing '/'. -dumpmachine Print the compiler's target machine (for example, i686-pc-linux-gnu)---and don't do anything else. -dumpversion Print the compiler version (for example, 3.0)---and don't do anything else. -dumpspecs Print the compiler's built-in specs---and don't do anything else. (This is used when GCC itself is being built.) Options That Control Optimization These options control various sorts of optimizations: -O -O1 Optimize. Optimizing compilation takes somewhat more time, and a lot more memory for a large function. Without -O, the compiler's goal is to reduce the cost of compilation and to make debugging produce the expected results. Statements are independent: if you stop the program with a breakpoint between statements, you can then assign a new value to any variable or change the program counter to any other statement in the function and get exactly the results you would expect from the source code. Without -O, the compiler only allocates variables declared "register" in registers. The resulting com- piled code is a little worse than produced by PCC without -O. With -O, the compiler tries to reduce code size and execution time. When you specify -O, the compiler turns on -fthread-jumps and -fdefer-pop on all machines. The compiler turns on -fdelayed-branch on machines that have delay slots, and -fomit-frame-pointer on machines that can support debugging even without a frame pointer. On some machines the compiler also turns on other flags. -O2 Optimize even more. GCC performs nearly all supported optimizations that do not involve a space-speed trade- off. The compiler does not perform loop unrolling or function inlining when you specify -O2. As compared to -O, this option increases both compilation time and the performance of the generated code. -O2 turns on all optional optimizations except for loop unrolling, function inlining, and register renam- ing. It also turns on the -fforce-mem option on all machines and frame pointer elimination on machines where doing so does not interfere with debugging. Please note the warning under -fgcse about invoking -O2 on programs that use computed gotos. -O3 Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-func- tions and -frename-registers options. -O0 Do not optimize. -Os Optimize for size. -Os enables all -O2 optimizations that do not typically increase code size. It also performs further optimizations designed to reduce code size. If you use multiple -O options, with or without level numbers, the last such option is the one that is effective. Options of the form -fflag specify machine-independent flags. Most flags have both positive and negative forms; the negative form of -ffoo would be -fno-foo. In the table below, only one of the forms is listed---the one which is not the default. You can figure out the other form by either removing no- or adding it. -ffloat-store Do not store floating point variables in registers, and inhibit other options that might change whether a floating point value is taken from a register or mem- ory. This option prevents undesirable excess precision on machines such as the 68000 where the floating regis- ters (of the 68881) keep more precision than a "dou- ble" is supposed to have. Similarly for the x86 architecture. For most programs, the excess precision does only good, but a few programs rely on the precise definition of IEEE floating point. Use -ffloat-store for such programs, after modifying them to store all pertinent intermediate computations into variables. -fno-default-inline Do not make member functions inline by default merely because they are defined inside the class scope (C++ only). Otherwise, when you specify -O, member func- tions defined inside class scope are compiled inline by default; i.e., you don't need to add inline in front of the member function name. -fno-defer-pop Always pop the arguments to each function call as soon as that function returns. For machines which must pop arguments after a function call, the compiler normally lets arguments accumulate on the stack for several function calls and pops them all at once. -fforce-mem Force memory operands to be copied into registers before doing arithmetic on them. This produces better code by making all memory references potential common subexpressions. When they are not common subexpres- sions, instruction combination should eliminate the separate register-load. The -O2 option turns on this option. -fforce-addr Force memory address constants to be copied into reg- isters before doing arithmetic on them. This may pro- duce better code just as -fforce-mem may. -fomit-frame-pointer Don't keep the frame pointer in a register for func- tions that don't need one. This avoids the instruc- tions to save, set up and restore frame pointers; it also makes an extra register available in many func- tions. It also makes debugging impossible on some machines. On some machines, such as the Vax, this flag has no effect, because the standard calling sequence automat- ically handles the frame pointer and nothing is saved by pretending it doesn't exist. The machine-descrip- tion macro "FRAME_POINTER_REQUIRED" controls whether a target machine supports this flag. -foptimize-sibling-calls Optimize sibling and tail recursive calls. -ftrapv This option generates traps for signed overflow on addition, subtraction, multiplication operations. -fno-inline Don't pay attention to the "inline" keyword. Normally this option is used to keep the compiler from expand- ing any functions inline. Note that if you are not optimizing, no functions can be expanded inline. -finline-functions Integrate all simple functions into their callers. The compiler heuristically decides which functions are simple enough to be worth integrating in this way. If all calls to a given function are integrated, and the function is declared "static", then the function is normally not output as assembler code in its own right. -finline-limit=n By default, gcc limits the size of functions that can be inlined. This flag allows the control of this limit for functions that are explicitly marked as inline (ie marked with the inline keyword or defined within the class definition in c++). n is the size of functions that can be inlined in number of pseudo instructions (not counting parameter handling). The default value of n is 600. Increasing this value can result in more inlined code at the cost of compilation time and memory consumption. Decreasing usually makes the compilation faster and less code will be inlined (which presumably means slower programs). This option is particularly useful for programs that use inlining heavily such as those based on recursive templates with C++. Note: pseudo instruction represents, in this particu- lar context, an abstract measurement of function's size. In no way, it represents a count of assembly instructions and as such its exact meaning might change from one release to an another. -fkeep-inline-functions Even if all calls to a given function are integrated, and the function is declared "static", nevertheless output a separate run-time callable version of the function. This switch does not affect "extern inline" functions. -fkeep-static-consts Emit variables declared "static const" when optimiza- tion isn't turned on, even if the variables aren't referenced. GCC enables this option by default. If you want to force the compiler to check if the variable was refer- enced, regardless of whether or not optimization is turned on, use the -fno-keep-static-consts option. -fno-function-cse Do not put function addresses in registers; make each instruction that calls a constant function contain the function's address explicitly. This option results in less efficient code, but some strange hacks that alter the assembler output may be confused by the optimizations performed when this option is not used. -ffast-math This option allows GCC to violate some ISO or IEEE rules and/or specifications in the interest of opti- mizing code for speed. For example, it allows the compiler to assume arguments to the "sqrt" function are non-negative numbers and that no floating-point values are NaNs. This option causes the preprocessor macro "__FAST_MATH__" to be defined. This option should never be turned on by any -O option since it can result in incorrect output for programs which depend on an exact implementation of IEEE or ISO rules/specifications for math functions. -fno-math-errno Do not set ERRNO after calling math functions that are executed with a single instruction, e.g., sqrt. A program that relies on IEEE exceptions for math error handling may want to use this flag for speed while maintaining IEEE arithmetic compatibility. The default is -fmath-errno. The -ffast-math option sets -fno-math-errno. The following options control specific optimizations. The -O2 option turns on all of these optimizations except -funroll-loops and -funroll-all-loops. On most machines, the -O option turns on the -fthread-jumps and -fde- layed-branch options, but specific machines may handle it differently. You can use the following flags in the rare cases when ``fine-tuning'' of optimizations to be performed is desired. -fstrength-reduce Perform the optimizations of loop strength reduction and elimination of iteration variables. -fthread-jumps Perform optimizations where we check to see if a jump branches to a location where another comparison sub- sumed by the first is found. If so, the first branch is redirected to either the destination of the second branch or a point immediately following it, depending on whether the condition is known to be true or false. -fcse-follow-jumps In common subexpression elimination, scan through jump instructions when the target of the jump is not reached by any other path. For example, when CSE encounters an "if" statement with an "else" clause, CSE will follow the jump when the condition tested is false. -fcse-skip-blocks This is similar to -fcse-follow-jumps, but causes CSE to follow jumps which conditionally skip over blocks. When CSE encounters a simple "if" statement with no else clause, -fcse-skip-blocks causes CSE to follow the jump around the body of the "if". -frerun-cse-after-loop Re-run common subexpression elimination after loop optimizations has been performed. -frerun-loop-opt Run the loop optimizer twice. -fgcse Perform a global common subexpression elimination pass. This pass also performs global constant and copy propagation. Note: When compiling a program using computed gotos, a GCC extension, you may get better runtime performance if you disable the global common subexpression elmina- tion pass by adding -fno-gcse to the command line. -fdelete-null-pointer-checks Use global dataflow analysis to identify and eliminate useless null pointer checks. Programs which rely on NULL pointer dereferences not halting the program may not work properly with this option. Use -fno-delete-null-pointer-checks to disable this opti- mizing for programs which depend on that behavior. -fexpensive-optimizations Perform a number of minor optimizations that are rela- tively expensive. -foptimize-register-move -fregmove Attempt to reassign register numbers in move instruc- tions and as operands of other simple instructions in order to maximize the amount of register tying. This is especially helpful on machines with two-operand instructions. GCC enables this optimization by default with -O2 or higher. Note -fregmove and -foptimize-register-move are the same optimization. -fdelayed-branch If supported for the target machine, attempt to reorder instructions to exploit instruction slots available after delayed branch instructions. -fschedule-insns If supported for the target machine, attempt to reorder instructions to eliminate execution stalls due to required data being unavailable. This helps machines that have slow floating point or memory load instructions by allowing other instructions to be issued until the result of the load or floating point instruction is required. -fschedule-insns2 Similar to -fschedule-insns, but requests an addi- tional pass of instruction scheduling after register allocation has been done. This is especially useful on machines with a relatively small number of regis- ters and where memory load instructions take more than one cycle. -ffunction-sections -fdata-sections Place each function or data item into its own section in the output file if the target supports arbitrary sections. The name of the function or the name of the data item determines the section's name in the output file. Use these options on systems where the linker can per- form optimizations to improve locality of reference in the instruction space. HPPA processors running HP-UX and Sparc processors running Solaris 2 have linkers with such optimizations. Other systems using the ELF object format as well as AIX may have these optimiza- tions in the future. Only use these options when there are significant ben- efits from doing so. When you specify these options, the assembler and linker will create larger object and executable files and will also be slower. You will not be able to use "gprof" on all systems if you spec- ify this option and you may have problems with debug- ging if you specify both this option and -g. -fcaller-saves Enable values to be allocated in registers that will be clobbered by function calls, by emitting extra instructions to save and restore the registers around such calls. Such allocation is done only when it seems to result in better code than would otherwise be produced. This option is always enabled by default on certain machines, usually those which have no call-preserved registers to use instead. For all machines, optimization level 2 and higher enables this flag by default. -funroll-loops Perform the optimization of loop unrolling. This is only done for loops whose number of iterations can be determined at compile time or run time. -fun- roll-loops implies both -fstrength-reduce and -fre- run-cse-after-loop. -funroll-all-loops Perform the optimization of loop unrolling. This is done for all loops and usually makes programs run more slowly. -funroll-all-loops implies -fstrength-reduce as well as -frerun-cse-after-loop. -fmove-all-movables Forces all invariant computations in loops to be moved outside the loop. -freduce-all-givs Forces all general-induction variables in loops to be strength-reduced. Note: When compiling programs written in Fortran, -fmove-all-movables and -freduce-all-givs are enabled by default when you use the optimizer. These options may generate better or worse code; results are highly dependent on the structure of loops within the source code. These two options are intended to be removed someday, once they have helped determine the efficacy of vari- ous approaches to improving loop optimizations. Please let us (<gcc@gcc.gnu.org> and <for- tran@gnu.org>) know how use of these options affects the performance of your production code. We're very interested in code that runs slower when these options are enabled. -fno-peephole -fno-peephole2 Disable any machine-specific peephole optimizations. The difference between -fno-peephole and -fno-peep- hole2 is in how they are implemented in the compiler; some targets use one, some use the other, a few use both. -fbranch-probabilities After running a program compiled with -fprofile-arcs, you can compile it a second time using -fbranch-proba- bilities, to improve optimizations based on guessing the path a branch might take. -fno-guess-branch-probability Sometimes gcc will opt to guess branch probabilities when none are available from either profile directed feedback (-fprofile-arcs) or __builtin_expect. In a hard real-time system, people don't want different runs of the compiler to produce code that has differ- ent behavior; minimizing non-determinism is of paramount import. This switch allows users to reduce non-determinism, possibly at the expense of inferior optimization. -fstrict-aliasing Allows the compiler to assume the strictest aliasing rules applicable to the language being compiled. For C (and C++), this activates optimizations based on the type of expressions. In particular, an object of one type is assumed never to reside at the same address as an object of a different type, unless the types are almost the same. For example, an "unsigned int" can alias an "int", but not a "void*" or a "double". A character type may alias any other type. Pay special attention to code like this: union a_union { int i; double d; }; int f() { a_union t; t.d = 3.0; return t.i; } The practice of reading from a different union member than the one most recently written to (called ``type-punning'') is common. Even with -fstrict-aliasing, type-punning is allowed, provided the memory is accessed through the union type. So, the code above will work as expected. However, this code might not: int f() { a_union t; int* ip; t.d = 3.0; ip = &t.i; return *ip; } -falign-functions -falign-functions=n Align the start of functions to the next power-of-two greater than n, skipping up to n bytes. For instance, -falign-functions=32 aligns functions to the next 32-byte boundary, but -falign-functions=24 would align to the next 32-byte boundary only if this can be done by skipping 23 bytes or less. -fno-align-functions and -falign-functions=1 are equivalent and mean that functions will not be aligned. Some assemblers only support this flag when n is a power of two; in that case, it is rounded up. If n is not specified, use a machine-dependent default. -falign-labels -falign-labels=n Align all branch targets to a power-of-two boundary, skipping up to n bytes like -falign-functions. This option can easily make code slower, because it must insert dummy operations for when the branch target is reached in the usual flow of the code. If -falign-loops or -falign-jumps are applicable and are greater than this value, then their values are used instead. If n is not specified, use a machine-dependent default which is very likely to be 1, meaning no alignment. -falign-loops -falign-loops=n Align loops to a power-of-two boundary, skipping up to n bytes like -falign-functions. The hope is that the loop will be executed many times, which will make up for any execution of the dummy operations. If n is not specified, use a machine-dependent default. -falign-jumps -falign-jumps=n Align branch targets to a power-of-two boundary, for branch targets where the targets can only be reached by jumping, skipping up to n bytes like -falign-func- tions. In this case, no dummy operations need be exe- cuted. If n is not specified, use a machine-dependent default. -fssa Perform optimizations in static single assignment form. Each function's flow graph is translated into SSA form, optimizations are performed, and the flow graph is translated back from SSA form. Users should not specify this option, since it is not yet ready for production use. -fdce Perform dead-code elimination in SSA form. Requires -fssa. Like -fssa, this is an experimental feature. -fsingle-precision-constant Treat floating point constant as single precision con- stant instead of implicitly converting it to double precision constant. -frename-registers Attempt to avoid false dependencies in scheduled code by making use of registers left over after register allocation. This optimization will most benefit pro- cessors with lots of registers. It can, however, make debugging impossible, since variables will no longer stay in a ``home register''. --param name=value In some places, GCC uses various constants to control the amount of optimization that is done. For example, GCC will not inline functions that contain more that a certain number of instructions. You can control some of these constants on the command-line using the --param option. In each case, the value is an integer. The allowable choices for name are given in the following table: max-delay-slot-insn-search The maximum number of instructions to consider when looking for an instruction to fill a delay slot. If more than this arbitrary number of instructions is searched, the time savings from filling the delay slot will be minimal so stop searching. Increasing values mean more aggressive optimization, making the compile time increase with probably small improvement in executable run time. max-delay-slot-live-search When trying to fill delay slots, the maximum num- ber of instructions to consider when searching for a block with valid live register information. Increasing this arbitrarily chosen value means more aggressive optimization, increasing the com- pile time. This parameter should be removed when the delay slot code is rewritten to maintain the control-flow graph. max-gcse-memory The approximate maximum amount of memory that will be allocated in order to perform the global common subexpression elimination optimization. If more memory than specified is required, the optimiza- tion will not be done. max-pending-list-length The maximum number of pending dependencies scheduling will allow before flushing the current state and starting over. Large functions with few branches or calls can create excessively large lists which needlessly consume memory and resources. max-inline-insns If an function contains more than this many instructions, it will not be inlined. This option is precisely equivalent to -finline-limit. Options Controlling the Preprocessor These options control the C preprocessor, which is run on each C source file before actual compilation. If you use the -E option, nothing is done except prepro- cessing. Some of these options make sense only together with -E because they cause the preprocessor output to be unsuitable for actual compilation. -include file Process file as input before processing the regular input file. In effect, the contents of file are com- piled first. Any -D and -U options on the command line are always processed before -include file, regardless of the order in which they are written. All the -include and -imacros options are processed in the order in which they are written. -imacros file Process file as input, discarding the resulting out- put, before processing the regular input file. Because the output generated from file is discarded, the only effect of -imacros file is to make the macros defined in file available for use in the main input. All the -include and -imacros options are processed in the order in which they are written. -idirafter dir Add the directory dir to the second include path. The directories on the second include path are searched when a header file is not found in any of the directo- ries in the main include path (the one that -I adds to). -iprefix prefix Specify prefix as the prefix for subsequent -iwithpre- fix options. -iwithprefix dir Add a directory to the second include path. The directory's name is made by concatenating prefix and dir, where prefix was specified previously with -iprefix. If you have not specified a prefix yet, the directory containing the installed passes of the com- piler is used as the default. -iwithprefixbefore dir Add a directory to the main include path. The direc- tory's name is made by concatenating prefix and dir, as in the case of -iwithprefix. -isystem dir Add a directory to the beginning of the second include path, marking it as a system directory, so that it gets the same special treatment as is applied to the standard system directories. -nostdinc Do not search the standard system directories for header files. Only the directories you have specified with -I options (and the current directory, if appro- priate) are searched. By using both -nostdinc and -I-, you can limit the include-file search path to only those directories you specify explicitly. -remap When searching for a header file in a directory, remap file names if a file named header.gcc exists in that directory. This can be used to work around limita- tions of file systems with file name restrictions. The header.gcc file should contain a series of lines with two tokens on each line: the first token is the name to map, and the second token is the actual name to use. -undef Do not predefine any nonstandard macros. (Including architecture flags). -E Run only the C preprocessor. Preprocess all the C source files specified and output the results to stan- dard output or to the specified output file. -C Tell the preprocessor not to discard comments. Used with the -E option. -P Tell the preprocessor not to generate #line direc- tives. Used with the -E option. -M Instead of outputting the result of preprocessing, output a rule suitable for "make" describing the dependencies of the main source file. The preproces- sor outputs one "make" rule containing the object file name for that source file, a colon, and the names of all the included files. Unless overridden explicitly, the object file name consists of the basename of the source file with any suffix replaced with object file suffix. If there are many included files then the rule is split into several lines using \-newline. -M implies -E. -MM Like -M, but mention only the files included with #include "file". System header files included with #include <file> are omitted. -MD Like -M but the dependency information is written to a file rather than stdout. "gcc" will use the same file name and directory as the object file, but with the suffix .d instead. This is in addition to compiling the main file as specified----MD does not inhibit ordinary compilation the way -M does, unless you also specify -MG. With Mach, you can use the utility "md" to merge mul- tiple dependency files into a single dependency file suitable for using with the make command. -MMD Like -MD except mention only user header files, not system -header files. -MF file When used with -M or -MM, specifies a file to write the dependencies to. This allows the preprocessor to write the preprocessed file to stdout normally. If no -MF switch is given, CPP sends the rules to stdout and suppresses normal preprocessed output. Another way to specify output of a "make" rule is by setting the environment variable DEPENDENCIES_OUTPUT. -MG When used with -M or -MM, -MG says to treat missing header files as generated files and assume they live in the same directory as the source file. It sup- presses preprocessed output, as a missing header file is ordinarily an error. This feature is used in automatic updating of make- files. -MP This option instructs CPP to add a phony target for each dependency other than the main file, causing each to depend on nothing. These dummy rules work around errors "make" gives if you remove header files without updating the "Makefile" to match. This is typical output:- /tmp/test.o: /tmp/test.c /tmp/test.h /tmp/test.h: -MQ target -MT target By default CPP uses the main file name, including any path, and appends the object suffix, normally ``.o'', to it to obtain the name of the target for dependency generation. With -MT you can specify a target your- self, overriding the default one. If you want multiple targets, you can specify them as a single argument to -MT, or use multiple -MT options. The targets you specify are output in the order they appear on the command line. -MQ is identical to -MT, except that the target name is quoted for Make, but with -MT it isn't. For example, -MT '$(objpfx)foo.o' gives $(objpfx)foo.o: /tmp/foo.c but -MQ '$(objpfx)foo.o' gives $$(objpfx)foo.o: /tmp/foo.c The default target is automatically quoted, as if it were given with -MQ. -H Print the name of each header file used, in addition to other normal activities. -Aquestion(n) Assert the answer answer for question, in case it is tested with a preprocessing conditional such as #if #question(n). -A- disables the standard asser- tions that normally describe the target machine. -Dmacro Define macro macro with the string 1 as its defini- tion. -Dmacro=defn Define macro macro as defn. All instances of -D on the command line are processed before any -U options. Any -D and -U options on the command line are pro- cessed in order, and always before -imacros file, regardless of the order in which they are written. -Umacro Undefine macro macro. -U options are evaluated after all -D options, but before any -include and -imacros options. Any -D and -U options on the command line are pro- cessed in order, and always before -imacros file, regardless of the order in which they are written. -dM Tell the preprocessor to output only a list of the macro definitions that are in effect at the end of preprocessing. Used with the -E option. -dD Tell the preprocessing to pass all macro definitions into the output, in their proper sequence in the rest of the output. -dN Like -dD except that the macro arguments and contents are omitted. Only #define name is included in the output. -dI Output #include directives in addition to the result of preprocessing. -fpreprocessed Indicate to the preprocessor that the input file has already been preprocessed. This suppresses things like macro expansion, trigraph conversion, escaped newline splicing, and processing of most directives. In this mode the integrated preprocessor is little more than a tokenizer for the front ends. -fpreprocessed is implicit if the input file has one of the extensions i, ii or mi indicating it has already been preprocessed. -trigraphs Process ISO standard trigraph sequences. These are three-character sequences, all starting with ??, that are defined by ISO C to stand for single characters. For example, ??/ stands for \, so '??/n' is a charac- ter constant for a newline. By default, GCC ignores trigraphs, but in standard-conforming modes it con- verts them. See the -std and -ansi options. The nine trigraph sequences are ??( @expansion{} [ ??) @expansion{} ] ??< @expansion{} { ??> @expansion{} } ??= @expansion{} # ??/ @expansion{} \ ??' @expansion{} ^ ??! @expansion{} | ??- @expansion{} ~ Trigraph support is not popular, so many compilers do not implement it properly. Portable code should not rely on trigraphs being either converted or ignored. -Wp,option Pass option as an option to the preprocessor. If option contains commas, it is split into multiple options at the commas. Passing Options to the Assembler You can pass options to the assembler. -Wa,option Pass option as an option to the assembler. If option contains commas, it is split into multiple options at the commas. Options for Linking These options come into play when the compiler links object files into an executable output file. They are meaningless if the compiler is not doing a link step. object-file-name A file name that does not end in a special recognized suffix is considered to name an object file or library. (Object files are distinguished from libraries by the linker according to the file con- tents.) If linking is done, these object files are used as input to the linker. -c -S -E If any of these options is used, then the linker is not run, and object file names should not be used as arguments. -llibrary Search the library named library when linking. It makes a difference where in the command you write this option; the linker searches processes libraries and object files in the order they are specified. Thus, foo.o -lz bar.o searches library z after file foo.o but before bar.o. If bar.o refers to functions in z, those functions may not be loaded. The linker searches a standard list of directories for the library, which is actually a file named libli- brary.a. The linker then uses this file as if it had been specified precisely by name. The directories searched include several standard sys- tem directories plus any that you specify with -L. Normally the files found this way are library files---archive files whose members are object files. The linker handles an archive file by scanning through it for members which define symbols that have so far been referenced but not defined. But if the file that is found is an ordinary object file, it is linked in the usual fashion. The only difference between using an -l option and specifying a file name is that -l surrounds library with lib and .a and searches several directories. -lobjc You need this special case of the -l option in order to link an Objective C program. -nostartfiles Do not use the standard system startup files when linking. The standard system libraries are used nor- mally, unless -nostdlib or -nodefaultlibs is used. -nodefaultlibs Do not use the standard system libraries when linking. Only the libraries you specify will be passed to the linker. The standard startup files are used normally, unless -nostartfiles is used. The compiler may gener- ate calls to memcmp, memset, and memcpy for System V (and ISO C) environments or to bcopy and bzero for BSD environments. These entries are usually resolved by entries in libc. These entry points should be sup- plied through some other mechanism when this option is specified. -nostdlib Do not use the standard system startup files or libraries when linking. No startup files and only the libraries you specify will be passed to the linker. The compiler may generate calls to memcmp, memset, and memcpy for System V (and ISO C) environments or to bcopy and bzero for BSD environments. These entries are usually resolved by entries in libc. These entry points should be supplied through some other mechanism when this option is specified. One of the standard libraries bypassed by -nostdlib and -nodefaultlibs is libgcc.a, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some lan- guages. In most cases, you need libgcc.a even when you want to avoid other standard libraries. In other words, when you specify -nostdlib or -nodefaultlibs you should usually specify -lgcc as well. This ensures that you have no unresolved references to internal GCC library subroutines. (For example, __main, used to ensure C++ constructors will be called.) -s Remove all symbol table and relocation information from the executable. -static On systems that support dynamic linking, this prevents linking with the shared libraries. On other systems, this option has no effect. -shared Produce a shared object which can then be linked with other objects to form an executable. Not all systems support this option. For predictable results, you must also specify the same set of options that were used to generate code (-fpic, -fPIC, or model subop- tions) when you specify this option.[1] -shared-libgcc -static-libgcc On systems that provide libgcc as a shared library, these options force the use of either the shared or static version respectively. If no shared version of libgcc was built when the compiler was configured, these options have no effect. There are several situations in which an application should use the shared libgcc instead of the static version. The most common of these is when the appli- cation wishes to throw and catch exceptions across different shared libraries. In that case, each of the libraries as well as the application itself should use the shared libgcc. Therefore, whenever you specify the -shared option, the GCC driver automatically adds -shared-libgcc, unless you explicitly specify -static-libgcc. The G++ driver automatically adds -shared-libgcc when you build a main executable as well because for C++ pro- grams that is typically the right thing to do. (Exception-handling will not work reliably otherwise.) However, when linking a main executable written in C, you must explicitly say -shared-libgcc if you want to use the shared libgcc. -symbolic Bind references to global symbols when building a shared object. Warn about any unresolved references (unless overridden by the link editor option -Xlinker -z -Xlinker defs). Only a few systems support this option. -Xlinker option Pass option as an option to the linker. You can use this to supply system-specific linker options which GCC does not know how to recognize. If you want to pass an option that takes an argument, you must use -Xlinker twice, once for the option and once for the argument. For example, to pass -assert definitions, you must write -Xlinker -assert -Xlinker definitions. It does not work to write -Xlinker "-assert definitions", because this passes the entire string as a single argument, which is not what the linker expects. -Wl,option Pass option as an option to the linker. If option contains commas, it is split into multiple options at the commas. -u symbol Pretend the symbol symbol is undefined, to force link- ing of library modules to define it. You can use -u multiple times with different symbols to force loading of additional library modules. Options for Directory Search These options specify directories to search for header files, for libraries and for parts of the compiler: -Idir Add the directory dir to the head of the list of directories to be searched for header files. This can be used to override a system header file, substituting your own version, since these directories are searched before the system header file directories. However, you should not use this option to add directories that contain vendor-supplied system header files (use -isystem for that). If you use more than one -I option, the directories are scanned in left-to-right order; the standard system directories come after. -I- Any directories you specify with -I options before the -I- option are searched only for the case of #include "file"; they are not searched for #include <file>. If additional directories are specified with -I options after the -I-, these directories are searched for all #include directives. (Ordinarily all -I directories are used this way.) In addition, the -I- option inhibits the use of the current directory (where the current input file came from) as the first search directory for #include "file". There is no way to override this effect of -I-. With -I. you can specify searching the directory which was current when the compiler was invoked. That is not exactly the same as what the preprocessor does by default, but it is often satisfactory. -I- does not inhibit the use of the standard system directories for header files. Thus, -I- and -nostdinc are independent. -Ldir Add directory dir to the list of directories to be searched for -l. -Bprefix This option specifies where to find the executables, libraries, include files, and data files of the com- piler itself. The compiler driver program runs one or more of the subprograms cpp, cc1, as and ld. It tries prefix as a prefix for each program it tries to run, both with and without machine/version/. For each subprogram to be run, the compiler driver first tries the -B prefix, if any. If that name is not found, or if -B was not specified, the driver tries two standard prefixes, which are /usr/lib/gcc/ and /usr/local/lib/gcc-lib/. If neither of those results in a file name that is found, the unmodified program name is searched for using the directories specified in your PATH environment variable. -B prefixes that effectively specify directory names also apply to libraries in the linker, because the compiler translates these options into -L options for the linker. They also apply to includes files in the preprocessor, because the compiler translates these options into -isystem options for the preprocessor. In this case, the compiler appends include to the pre- fix. The run-time support file libgcc.a can also be searched for using the -B prefix, if needed. If it is not found there, the two standard prefixes above are tried, and that is all. The file is left out of the link if it is not found by those means. Another way to specify a prefix much like the -B pre- fix is to use the environment variable GCC_EXEC_PRE- FIX. -specs=file Process file after the compiler reads in the standard specs file, in order to override the defaults that the gcc driver program uses when determining what switches to pass to cc1, cc1plus, as, ld, etc. More than one -specs=file can be specified on the command line, and they are processed in order, from left to right. Specifying Target Machine and Compiler Version By default, GCC compiles code for the same type of machine that you are using. However, it can also be installed as a cross-compiler, to compile for some other type of machine. In fact, several different configurations of GCC, for different target machines, can be installed side by side. Then you specify which one to use with the -b option. In addition, older and newer versions of GCC can be installed side by side. One of them (probably the newest) will be the default, but you may sometimes wish to use another. -b machine The argument machine specifies the target machine for compilation. This is useful when you have installed GCC as a cross-compiler. The value to use for machine is the same as was speci- fied as the machine type when configuring GCC as a cross-compiler. For example, if a cross-compiler was configured with configure i386v, meaning to compile for an 80386 running System V, then you would specify -b i386v to run that cross compiler. When you do not specify -b, it normally means to com- pile for the same type of machine that you are using. -V version The argument version specifies which version of GCC to run. This is useful when multiple versions are installed. For example, version might be 2.0, meaning to run GCC version 2.0. The default version, when you do not specify -V, is the last version of GCC that you installed. The -b and -V options actually work by controlling part of the file name used for the executable files and libraries used for compilation. A given version of GCC, for a given target machine, is normally kept in the directory /usr/local/lib/gcc-lib/machine/version. Thus, sites can customize the effect of -b or -V either by changing the names of these directories or adding alter- nate names (or symbolic links). If in directory /usr/local/lib/gcc-lib/ the file 80386 is a link to the file i386v, then -b 80386 becomes an alias for -b i386v. In one respect, the -b or -V do not completely change to a different compiler: the top-level driver program gcc that you originally invoked continues to run and invoke the other executables (preprocessor, compiler per se, assem- bler and linker) that do the real work. However, since no real work is done in the driver program, it usually does not matter that the driver program in use is not the one for the specified target. It is common for the interface to the other executables to change incompatibly between compiler versions, so unless the version specified is very close to that of the driver (for example, -V 3.0 with a driver program from GCC version 3.0.1), use of -V may not work; for example, using -V 2.95.2 will not work with a driver program from GCC 3.0. The only way that the driver program depends on the target machine is in the parsing and handling of special machine- specific options. However, this is controlled by a file which is found, along with the other executables, in the directory for the specified version and target machine. As a result, a single installed driver program adapts to any specified target machine, and sufficiently similar compiler versions. The driver program executable does control one significant thing, however: the default version and target machine. Therefore, you can install different instances of the driver program, compiled for different targets or ver- sions, under different names. For example, if the driver for version 2.0 is installed as ogcc and that for version 2.1 is installed as gcc, then the command gcc will use version 2.1 by default, while ogcc will use 2.0 by default. However, you can choose either version with either command with the -V option. Hardware Models and Configurations Earlier we discussed the standard option -b which chooses among different installed compilers for completely differ- ent target machines, such as Vax vs. 68000 vs. 80386. In addition, each of these target machine types can have its own special options, starting with -m, to choose among various hardware models or configurations---for example, 68010 vs 68020, floating coprocessor or none. A single installed version of the compiler can compile for any model or configuration, according to the options speci- fied. Some configurations of the compiler also support addi- tional special options, usually for compatibility with other compilers on the same platform. M680x0 Options These are the -m options defined for the 68000 series. The default values for these options depends on which style of 68000 was selected when the compiler was config- ured; the defaults for the most common choices are given below. -m68000 -mc68000 Generate output for a 68000. This is the default when the compiler is configured for 68000-based systems. Use this option for microcontrollers with a 68000 or EC000 core, including the 68008, 68302, 68306, 68307, 68322, 68328 and 68356. -m68020 -mc68020 Generate output for a 68020. This is the default when the compiler is configured for 68020-based systems. -m68881 Generate output containing 68881 instructions for floating point. This is the default for most 68020 systems unless --nfp was specified when the compiler was configured. -m68030 Generate output for a 68030. This is the default when the compiler is configured for 68030-based systems. -m68040 Generate output for a 68040. This is the default when the compiler is configured for 68040-based systems. This option inhibits the use of 68881/68882 instruc- tions that have to be emulated by software on the 68040. Use this option if your 68040 does not have code to emulate those instructions. -m68060 Generate output for a 68060. This is the default when the compiler is configured for 68060-based systems. This option inhibits the use of 68020 and 68881/68882 instructions that have to be emulated by software on the 68060. Use this option if your 68060 does not have code to emulate those instructions. -mcpu32 Generate output for a CPU32. This is the default when the compiler is configured for CPU32-based systems. Use this option for microcontrollers with a CPU32 or CPU32+ core, including the 68330, 68331, 68332, 68333, 68334, 68336, 68340, 68341, 68349 and 68360. -m5200 Generate output for a 520X ``coldfire'' family cpu. This is the default when the compiler is configured for 520X-based systems. Use this option for microcontroller with a 5200 core, including the MCF5202, MCF5203, MCF5204 and MCF5202. -m68020-40 Generate output for a 68040, without using any of the new instructions. This results in code which can run relatively efficiently on either a 68020/68881 or a 68030 or a 68040. The generated code does use the 68881 instructions that are emulated on the 68040. -m68020-60 Generate output for a 68060, without using any of the new instructions. This results in code which can run relatively efficiently on either a 68020/68881 or a 68030 or a 68040. The generated code does use the 68881 instructions that are emulated on the 68060. -mfpa Generate output containing Sun FPA instructions for floating point. -msoft-float Generate output containing library calls for floating point. Warning: the requisite libraries are not available for all m68k targets. Normally the facili- ties of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. The embedded targets m68k-*-aout and m68k-*-coff do provide soft- ware floating point support. -mshort Consider type "int" to be 16 bits wide, like "short int". -mnobitfield Do not use the bit-field instructions. The -m68000, -mcpu32 and -m5200 options imply -mnobitfield. -mbitfield Do use the bit-field instructions. The -m68020 option implies -mbitfield. This is the default if you use a configuration designed for a 68020. -mrtd Use a different function-calling convention, in which functions that take a fixed number of arguments return with the "rtd" instruction, which pops their arguments while returning. This saves one instruction in the caller since there is no need to pop the arguments there. This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix com- piler. Also, you must provide function prototypes for all functions that take variable numbers of arguments (including "printf"); otherwise incorrect code will be generated for calls to those functions. In addition, seriously incorrect code will result if you call a function with too many arguments. (Nor- mally, extra arguments are harmlessly ignored.) The "rtd" instruction is supported by the 68010, 68020, 68030, 68040, 68060 and CPU32 processors, but not by the 68000 or 5200. -malign-int -mno-align-int Control whether GCC aligns "int", "long", "long long", "float", "double", and "long double" variables on a 32-bit boundary (-malign-int) or a 16-bit boundary (-mno-align-int). Aligning variables on 32-bit bound- aries produces code that runs somewhat faster on pro- cessors with 32-bit busses at the expense of more mem- ory. Warning: if you use the -malign-int switch, GCC will align structures containing the above types differ- ently than most published application binary interface specifications for the m68k. -mpcrel Use the pc-relative addressing mode of the 68000 directly, instead of using a global offset table. At present, this option implies -fpic, allowing at most a 16-bit offset for pc-relative addressing. -fPIC is not presently supported with -mpcrel, though this could be supported for 68020 and higher processors. -mno-strict-align -mstrict-align Do not (do) assume that unaligned memory references will be handled by the system. M68hc1x Options These are the -m options defined for the 68hc11 and 68hc12 microcontrollers. The default values for these options depends on which style of microcontroller was selected when the compiler was configured; the defaults for the most common choices are given below. -m6811 -m68hc11 Generate output for a 68HC11. This is the default when the compiler is configured for 68HC11-based sys- tems. -m6812 -m68hc12 Generate output for a 68HC12. This is the default when the compiler is configured for 68HC12-based sys- tems. -mauto-incdec Enable the use of 68HC12 pre and post auto-increment and auto-decrement addressing modes. -mshort Consider type "int" to be 16 bits wide, like "short int". -msoft-reg-count=count Specify the number of pseudo-soft registers which are used for the code generation. The maximum number is 32. Using more pseudo-soft register may or may not result in better code depending on the program. The default is 4 for 68HC11 and 2 for 68HC12. VAX Options These -m options are defined for the Vax: -munix Do not output certain jump instructions ("aobleq" and so on) that the Unix assembler for the Vax cannot han- dle across long ranges. -mgnu Do output those jump instructions, on the assumption that you will assemble with the GNU assembler. -mg Output code for g-format floating point numbers instead of d-format. SPARC Options These -m switches are supported on the SPARC: -mno-app-regs -mapp-regs Specify -mapp-regs to generate output using the global registers 2 through 4, which the SPARC SVR4 ABI reserves for applications. This is the default. To be fully SVR4 ABI compliant at the cost of some performance loss, specify -mno-app-regs. You should compile libraries and system software with this option. -mfpu -mhard-float Generate output containing floating point instruc- tions. This is the default. -mno-fpu -msoft-float Generate output containing library calls for floating point. Warning: the requisite libraries are not available for all SPARC targets. Normally the facili- ties of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. The embedded targets sparc-*-aout and sparclite-*-* do provide software floating point support. -msoft-float changes the calling convention in the output file; therefore, it is only useful if you com- pile all of a program with this option. In particu- lar, you need to compile libgcc.a, the library that comes with GCC, with -msoft-float in order for this to work. -mhard-quad-float Generate output containing quad-word (long double) floating point instructions. -msoft-quad-float Generate output containing library calls for quad-word (long double) floating point instructions. The func- tions called are those specified in the SPARC ABI. This is the default. As of this writing, there are no sparc implementations that have hardware support for the quad-word floating point instructions. They all invoke a trap handler for one of these instructions, and then the trap han- dler emulates the effect of the instruction. Because of the trap handler overhead, this is much slower than calling the ABI library routines. Thus the -msoft-quad-float option is the default. -mno-epilogue -mepilogue With -mepilogue (the default), the compiler always emits code for function exit at the end of each func- tion. Any function exit in the middle of the function (such as a return statement in C) will generate a jump to the exit code at the end of the function. With -mno-epilogue, the compiler tries to emit exit code inline at every function exit. -mno-flat -mflat With -mflat, the compiler does not generate save/restore instructions and will use a ``flat'' or single register window calling convention. This model uses %i7 as the frame pointer and is compatible with the normal register window model. Code from either may be intermixed. The local registers and the input registers (0--5) are still treated as ``call saved'' registers and will be saved on the stack as necessary. With -mno-flat (the default), the compiler emits save/restore instructions (except for leaf functions) and is the normal mode of operation. -mno-unaligned-doubles -munaligned-doubles Assume that doubles have 8 byte alignment. This is the default. With -munaligned-doubles, GCC assumes that doubles have 8 byte alignment only if they are contained in another type, or if they have an absolute address. Otherwise, it assumes they have 4 byte alignment. Specifying this option avoids some rare compatibility problems with code generated by other compilers. It is not the default because it results in a performance loss, especially for floating point code. -mno-faster-structs -mfaster-structs With -mfaster-structs, the compiler assumes that structures should have 8 byte alignment. This enables the use of pairs of "ldd" and "std" instructions for copies in structure assignment, in place of twice as many "ld" and "st" pairs. However, the use of this changed alignment directly violates the Sparc ABI. Thus, it's intended only for use on targets where the developer acknowledges that their resulting code will not be directly in line with the rules of the ABI. -mv8 -msparclite These two options select variations on the SPARC architecture. By default (unless specifically configured for the Fujitsu SPARClite), GCC generates code for the v7 variant of the SPARC architecture. -mv8 will give you SPARC v8 code. The only difference from v7 code is that the compiler emits the integer multiply and integer divide instructions which exist in SPARC v8 but not in SPARC v7. -msparclite will give you SPARClite code. This adds the integer multiply, integer divide step and scan ("ffs") instructions which exist in SPARClite but not in SPARC v7. These options are deprecated and will be deleted in a future GCC release. They have been replaced with -mcpu=xxx. -mcypress -msupersparc These two options select the processor for which the code is optimised. With -mcypress (the default), the compiler optimizes code for the Cypress CY7C602 chip, as used in the SparcStation/SparcServer 3xx series. This is also appropriate for the older SparcStation 1, 2, IPX etc. With -msupersparc the compiler optimizes code for the SuperSparc cpu, as used in the SparcStation 10, 1000 and 2000 series. This flag also enables use of the full SPARC v8 instruction set. These options are deprecated and will be deleted in a future GCC release. They have been replaced with -mcpu=xxx. -mcpu=cpu_type Set the instruction set, register set, and instruction scheduling parameters for machine type cpu_type. Sup- ported values for cpu_type are v7, cypress, v8, super- sparc, sparclite, hypersparc, sparclite86x, f930, f934, sparclet, tsc701, v9, and ultrasparc. Default instruction scheduling parameters are used for values that select an architecture and not an imple- mentation. These are v7, v8, sparclite, sparclet, v9. Here is a list of each supported architecture and their supported implementations. v7: cypress v8: supersparc, hypersparc sparclite: f930, f934, sparclite86x sparclet: tsc701 v9: ultrasparc -mtune=cpu_type Set the instruction scheduling parameters for machine type cpu_type, but do not set the instruction set or register set that the option -mcpu=cpu_type would. The same values for -mcpu=cpu_type are used for -mtune=cpu_type, though the only useful values are those that select a particular cpu implementation: cypress, supersparc, hypersparc, f930, f934, spar- clite86x, tsc701, ultrasparc. These -m switches are supported in addition to the above on the SPARCLET processor. -mlittle-endian Generate code for a processor running in little-endian mode. -mlive-g0 Treat register %g0 as a normal register. GCC will continue to clobber it as necessary but will not assume it always reads as 0. -mbroken-saverestore Generate code that does not use non-trivial forms of the "save" and "restore" instructions. Early versions of the SPARCLET processor do not correctly handle "save" and "restore" instructions used with arguments. They correctly handle them used without arguments. A "save" instruction used without arguments increments the current window pointer but does not allocate a new stack frame. It is assumed that the window overflow trap handler will properly handle this case as will interrupt handlers. These -m switches are supported in addition to the above on SPARC V9 processors in 64-bit environments. -mlittle-endian Generate code for a processor running in little-endian mode. -m32 -m64 Generate code for a 32-bit or 64-bit environment. The 32-bit environment sets int, long and pointer to 32 bits. The 64-bit environment sets int to 32 bits and long and pointer to 64 bits. -mcmodel=medlow Generate code for the Medium/Low code model: the pro- gram must be linked in the low 32 bits of the address space. Pointers are 64 bits. Programs can be statically or dynamically linked. -mcmodel=medmid Generate code for the Medium/Middle code model: the program must be linked in the low 44 bits of the address space, the text segment must be less than 2G bytes, and data segment must be within 2G of the text segment. Pointers are 64 bits. -mcmodel=medany Generate code for the Medium/Anywhere code model: the program may be linked anywhere in the address space, the text segment must be less than 2G bytes, and data segment must be within 2G of the text segment. Point- ers are 64 bits. -mcmodel=embmedany Generate code for the Medium/Anywhere code model for embedded systems: assume a 32-bit text and a 32-bit data segment, both starting anywhere (determined at link time). Register %g4 points to the base of the data segment. Pointers are still 64 bits. Programs are statically linked, PIC is not supported. -mstack-bias -mno-stack-bias With -mstack-bias, GCC assumes that the stack pointer, and frame pointer if present, are offset by -2047 which must be added back when making stack frame ref- erences. Otherwise, assume no such offset is present. Convex Options These -m options are defined for Convex: -mc1 Generate output for C1. The code will run on any Con- vex machine. The preprocessor symbol "__convex__c1__" is defined. -mc2 Generate output for C2. Uses instructions not avail- able on C1. Scheduling and other optimizations are chosen for max performance on C2. The preprocessor symbol "__convex_c2__" is defined. -mc32 Generate output for C32xx. Uses instructions not available on C1. Scheduling and other optimizations are chosen for max performance on C32. The preproces- sor symbol "__convex_c32__" is defined. -mc34 Generate output for C34xx. Uses instructions not available on C1. Scheduling and other optimizations are chosen for max performance on C34. The preproces- sor symbol "__convex_c34__" is defined. -mc38 Generate output for C38xx. Uses instructions not available on C1. Scheduling and other optimizations are chosen for max performance on C38. The preproces- sor symbol "__convex_c38__" is defined. -margcount Generate code which puts an argument count in the word preceding each argument list. This is compatible with regular CC, and a few programs may need the argument count word. GDB and other source-level debuggers do not need it; this info is in the symbol table. -mnoargcount Omit the argument count word. This is the default. -mvolatile-cache Allow volatile references to be cached. This is the default. -mvolatile-nocache Volatile references bypass the data cache, going all the way to memory. This is only needed for multi-pro- cessor code that does not use standard synchronization instructions. Making non-volatile references to volatile locations will not necessarily work. -mlong32 Type long is 32 bits, the same as type int. This is the default. -mlong64 Type long is 64 bits, the same as type long long. This option is useless, because no library support exists for it. AMD29K Options These -m options are defined for the AMD Am29000: -mdw Generate code that assumes the "DW" bit is set, i.e., that byte and halfword operations are directly sup- ported by the hardware. This is the default. -mndw Generate code that assumes the "DW" bit is not set. -mbw Generate code that assumes the system supports byte and halfword write operations. This is the default. -mnbw Generate code that assumes the systems does not sup- port byte and halfword write operations. -mnbw implies -mndw. -msmall Use a small memory model that assumes that all func- tion addresses are either within a single 256 KB seg- ment or at an absolute address of less than 256k. This allows the "call" instruction to be used instead of a "const", "consth", "calli" sequence. -mnormal Use the normal memory model: Generate "call" instruc- tions only when calling functions in the same file and "calli" instructions otherwise. This works if each file occupies less than 256 KB but allows the entire executable to be larger than 256 KB. This is the default. -mlarge Always use "calli" instructions. Specify this option if you expect a single file to compile into more than 256 KB of code. -m29050 Generate code for the Am29050. -m29000 Generate code for the Am29000. This is the default. -mkernel-registers Generate references to registers "gr64-gr95" instead of to registers "gr96-gr127". This option can be used when compiling kernel code that wants a set of global registers disjoint from that used by user-mode code. Note that when this option is used, register names in -f flags must use the normal, user-mode, names. -muser-registers Use the normal set of global registers, "gr96-gr127". This is the default. -mstack-check -mno-stack-check Insert (or do not insert) a call to "__msp_check" after each stack adjustment. This is often used for kernel code. -mstorem-bug -mno-storem-bug -mstorem-bug handles 29k processors which cannot han- dle the separation of a mtsrim insn and a storem instruction (most 29000 chips to date, but not the 29050). -mno-reuse-arg-regs -mreuse-arg-regs -mno-reuse-arg-regs tells the compiler to only use incoming argument registers for copying out arguments. This helps detect calling a function with fewer argu- ments than it was declared with. -mno-impure-text -mimpure-text -mimpure-text, used in addition to -shared, tells the compiler to not pass -assert pure-text to the linker when linking a shared object. -msoft-float Generate output containing library calls for floating point. Warning: the requisite libraries are not part of GCC. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. -mno-multm Do not generate multm or multmu instructions. This is useful for some embedded systems which do not have trap handlers for these instructions. ARM Options These -m options are defined for Advanced RISC Machines (ARM) architectures: -mapcs-frame Generate a stack frame that is compliant with the ARM Procedure Call Standard for all functions, even if this is not strictly necessary for correct execution of the code. Specifying -fomit-frame-pointer with this option will cause the stack frames not to be gen- erated for leaf functions. The default is -mno-apcs-frame. -mapcs This is a synonym for -mapcs-frame. -mapcs-26 Generate code for a processor running with a 26-bit program counter, and conforming to the function call- ing standards for the APCS 26-bit option. This option replaces the -m2 and -m3 options of previous releases of the compiler. -mapcs-32 Generate code for a processor running with a 32-bit program counter, and conforming to the function call- ing standards for the APCS 32-bit option. This option replaces the -m6 option of previous releases of the compiler. -mthumb-interwork Generate code which supports calling between the ARM and Thumb instruction sets. Without this option the two instruction sets cannot be reliably used inside one program. The default is -mno-thumb-interwork, since slightly larger code is generated when -mthumb-interwork is specified. -mno-sched-prolog Prevent the reordering of instructions in the function prolog, or the merging of those instruction with the instructions in the function's body. This means that all functions will start with a recognizable set of instructions (or in fact one of a choice from a small set of different function prologues), and this infor- mation can be used to locate the start if functions inside an executable piece of code. The default is -msched-prolog. -mhard-float Generate output containing floating point instruc- tions. This is the default. -msoft-float Generate output containing library calls for floating point. Warning: the requisite libraries are not available for all ARM targets. Normally the facili- ties of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suit- able library functions for cross-compilation. -msoft-float changes the calling convention in the output file; therefore, it is only useful if you com- pile all of a program with this option. In particu- lar, you need to compile libgcc.a, the library that comes with GCC, with -msoft-float in order for this to work. -mlittle-endian Generate code for a processor running in little-endian mode. This is the default for all standard configura- tions. -mbig-endian Generate code for a processor running in big-endian mode; the default is to compile code for a little- endian processor. -mwords-little-endian This option only applies when generating code for big- endian processors. Generate code for a little-endian word order but a big-endian byte order. That is, a byte order of the form 32107654. Note: this option should only be used if you require compatibility with code for big-endian ARM processors generated by ver- sions of the compiler prior to 2.8. -malignment-traps Generate code that will not trap if the MMU has align- ment traps enabled. On ARM architectures prior to ARMv4, there were no instructions to access half-word objects stored in memory. However, when reading from memory a feature of the ARM architecture allows a word load to be used, even if the address is unaligned, and the processor core will rotate the data as it is being loaded. This option tells the compiler that such mis- aligned accesses will cause a MMU trap and that it should instead synthesise the access as a series of byte accesses. The compiler can still use word accesses to load half-word data if it knows that the address is aligned to a word boundary. This option is ignored when compiling for ARM archi- tecture 4 or later, since these processors have instructions to directly access half-word objects in memory. -mno-alignment-traps Generate code that assumes that the MMU will not trap unaligned accesses. This produces better code when the target instruction set does not have half-word memory operations (i.e. implementations prior to ARMv4). Note that you cannot use this option to access unaligned word objects, since the processor will only fetch one 32-bit aligned object from memory. The default setting for most targets is -mno-align- ment-traps, since this produces better code when there are no half-word memory instructions available. -mshort-load-bytes -mno-short-load-words These are deprecated aliases for -malignment-traps. -mno-short-load-bytes -mshort-load-words This are deprecated aliases for -mno-alignment-traps. -mbsd This option only applies to RISC iX. Emulate the native BSD-mode compiler. This is the default if -ansi is not specified. -mxopen This option only applies to RISC iX. Emulate the native X/Open-mode compiler. -mno-symrename This option only applies to RISC iX. Do not run the assembler post-processor, symrename, after code has been assembled. Normally it is necessary to modify some of the standard symbols in preparation for link- ing with the RISC iX C library; this option suppresses this pass. The post-processor is never run when the compiler is built for cross-compilation. -mcpu=name This specifies the name of the target ARM processor. GCC uses this name to determine what kind of instruc- tions it can emit when generating assembly code. Per- missible names are: arm2, arm250, arm3, arm6, arm60, arm600, arm610, arm620, arm7, arm7m, arm7d, arm7dm, arm7di, arm7dmi, arm70, arm700, arm700i, arm710, arm710c, arm7100, arm7500, arm7500fe, arm7tdmi, arm8, strongarm, strongarm110, strongarm1100, arm8, arm810, arm9, arm9e, arm920, arm920t, arm940t, arm9tdmi, arm10tdmi, arm1020t, xscale. -mtune=name This option is very similar to the -mcpu= option, except that instead of specifying the actual target processor type, and hence restricting which instruc- tions can be used, it specifies that GCC should tune the performance of the code as if the target were of the type specified in this option, but still choosing the instructions that it will generate based on the cpu specified by a -mcpu= option. For some ARM imple- mentations better performance can be obtained by using this option. -march=name This specifies the name of the target ARM architec- ture. GCC uses this name to determine what kind of instructions it can emit when generating assembly code. This option can be used in conjunction with or instead of the -mcpu= option. Permissible names are: armv2, armv2a, armv3, armv3m, armv4, armv4t, armv5, armv5t, armv5te. -mfpe=number -mfp=number This specifies the version of the floating point emu- lation available on the target. Permissible values are 2 and 3. -mfp= is a synonym for -mfpe=, for com- patibility with older versions of GCC. -mstructure-size-boundary=n The size of all structures and unions will be rounded up to a multiple of the number of bits set by this option. Permissible values are 8 and 32. The default value varies for different toolchains. For the COFF targeted toolchain the default value is 8. Specifying the larger number can produce faster, more efficient code, but can also increase the size of the program. The two values are potentially incompatible. Code compiled with one value cannot necessarily expect to work with code or libraries compiled with the other value, if they exchange information using structures or unions. -mabort-on-noreturn Generate a call to the function "abort" at the end of a "noreturn" function. It will be executed if the function tries to return. -mlong-calls -mno-long-calls Tells the compiler to perform function calls by first loading the address of the function into a register and then performing a subroutine call on this regis- ter. This switch is needed if the target function will lie outside of the 64 megabyte addressing range of the offset based version of subroutine call instruction. Even if this switch is enabled, not all function calls will be turned into long calls. The heuristic is that static functions, functions which have the short-call attribute, functions that are inside the scope of a #pragma no_long_calls directive and functions whose definitions have already been compiled within the cur- rent compilation unit, will not be turned into long calls. The exception to this rule is that weak func- tion definitions, functions with the long-call attribute or the section attribute, and functions that are within the scope of a #pragma long_calls direc- tive, will always be turned into long calls. This feature is not enabled by default. Specifying -mno-long-calls will restore the default behaviour, as will placing the function calls within the scope of a #pragma long_calls_off directive. Note these switches have no effect on how the compiler generates code to handle function calls via function pointers. -mnop-fun-dllimport Disable support for the "dllimport" attribute. -msingle-pic-base Treat the register used for PIC addressing as read-only, rather than loading it in the prologue for each function. The run-time system is responsible for initialising this register with an appropriate value before execution begins. -mpic-register=reg Specify the register to be used for PIC addressing. The default is R10 unless stack-checking is enabled, when R9 is used. -mpoke-function-name Write the name of each function into the text section, directly preceding the function prologue. The gener- ated code is similar to this: t0 .ascii "arm_poke_function_name", 0 .align t1 .word 0xff000000 + (t1 - t0) arm_poke_function_name mov ip, sp stmfd sp!, {fp, ip, lr, pc} sub fp, ip, #4 When performing a stack backtrace, code can inspect the value of "pc" stored at "fp + 0". If the trace function then looks at location "pc - 12" and the top 8 bits are set, then we know that there is a function name embedded immediately preceding this location and has length "((pc[-3]) & 0xff000000)". -mthumb Generate code for the 16-bit Thumb instruction set. The default is to use the 32-bit ARM instruction set. -mtpcs-frame Generate a stack frame that is compliant with the Thumb Procedure Call Standard for all non-leaf func- tions. (A leaf function is one that does not call any other functions.) The default is -mno-tpcs-frame. -mtpcs-leaf-frame Generate a stack frame that is compliant with the Thumb Procedure Call Standard for all leaf functions. (A leaf function is one that does not call any other functions.) The default is -mno-apcs-leaf-frame. -mcallee-super-interworking Gives all externally visible functions in the file being compiled an ARM instruction set header which switches to Thumb mode before executing the rest of the function. This allows these functions to be called from non-interworking code. -mcaller-super-interworking Allows calls via function pointers (including virtual functions) to execute correctly regardless of whether the target code has been compiled for interworking or not. There is a small overhead in the cost of execut- ing a function pointer if this option is enabled. MN10200 Options These -m options are defined for Matsushita MN10200 archi- tectures: -mrelax Indicate to the linker that it should perform a relax- ation optimization pass to shorten branches, calls and absolute memory addresses. This option only has an effect when used on the command line for the final link step. This option makes symbolic debugging impossible. MN10300 Options These -m options are defined for Matsushita MN10300 archi- tectures: -mmult-bug Generate code to avoid bugs in the multiply instruc- tions for the MN10300 processors. This is the default. -mno-mult-bug Do not generate code to avoid bugs in the multiply instructions for the MN10300 processors. -mam33 Generate code which uses features specific to the AM33 processor. -mno-am33 Do not generate code which uses features specific to the AM33 processor. This is the default. -mno-crt0 Do not link in the C run-time initialization object file. -mrelax Indicate to the linker that it should perform a relax- ation optimization pass to shorten branches, calls and absolute memory addresses. This option only has an effect when used on the command line for the final link step. This option makes symbolic debugging impossible. M32R/D Options These -m options are defined for Mitsubishi M32R/D archi- tectures: -mcode-model=small Assume all objects live in the lower 16MB of memory (so that their addresses can be loaded with the "ld24" instruction), and assume all subroutines are reachable with the "bl" instruction. This is the default. The addressability of a particular object can be set with the "model" attribute. -mcode-model=medium Assume objects may be anywhere in the 32-bit address space (the compiler will generate "seth/add3" instruc- tions to load their addresses), and assume all subrou- tines are reachable with the "bl" instruction. -mcode-model=large Assume objects may be anywhere in the 32-bit address space (the compiler will generate "seth/add3" instruc- tions to load their addresses), and assume subroutines may not be reachable with the "bl" instruction (the compiler will generate the much slower "seth/add3/jl" instruction sequence). -msdata=none Disable use of the small data area. Variables will be put into one of .data, bss, or .rodata (unless the "section" attribute has been specified). This is the default. The small data area consists of sections .sdata and .sbss. Objects may be explicitly put in the small data area with the "section" attribute using one of these sections. -msdata=sdata Put small global and static data in the small data area, but do not generate special code to reference them. -msdata=use Put small global and static data in the small data area, and generate special instructions to reference them. -G num Put global and static objects less than or equal to num bytes into the small data or bss sections instead of the normal data or bss sections. The default value of num is 8. The -msdata option must be set to one of sdata or use for this option to have any effect. All modules should be compiled with the same -G num value. Compiling with different values of num may or may not work; if it doesn't the linker will give an error message---incorrect code will not be generated. M88K Options These -m options are defined for Motorola 88k architec- tures: -m88000 Generate code that works well on both the m88100 and the m88110. -m88100 Generate code that works best for the m88100, but that also runs on the m88110. -m88110 Generate code that works best for the m88110, and may not run on the m88100. -mbig-pic Obsolete option to be removed from the next revision. Use -fPIC. -midentify-revision Include an "ident" directive in the assembler output recording the source file name, compiler name and ver- sion, timestamp, and compilation flags used. -mno-underscores In assembler output, emit symbol names without adding an underscore character at the beginning of each name. The default is to use an underscore as prefix on each name. -mocs-debug-info -mno-ocs-debug-info Include (or omit) additional debugging information (about registers used in each stack frame) as speci- fied in the 88open Object Compatibility Standard, ``OCS''. This extra information allows debugging of code that has had the frame pointer eliminated. The default for DG/UX, SVr4, and Delta 88 SVr3.2 is to include this information; other 88k configurations omit this information by default. -mocs-frame-position When emitting COFF debugging information for automatic variables and parameters stored on the stack, use the offset from the canonical frame address, which is the stack pointer (register 31) on entry to the function. The DG/UX, SVr4, Delta88 SVr3.2, and BCS configura- tions use -mocs-frame-position; other 88k configurations have the default -mno-ocs-frame-posi- tion. -mno-ocs-frame-position When emitting COFF debugging information for automatic variables and parameters stored on the stack, use the offset from the frame pointer register (register 30). When this option is in effect, the frame pointer is not eliminated when debugging information is selected by the -g switch. -moptimize-arg-area -mno-optimize-arg-area Control how function arguments are stored in stack frames. -moptimize-arg-area saves space by optimizing them, but this conflicts with the 88open specifica- tions. The opposite alternative, -mno-opti- mize-arg-area, agrees with 88open standards. By default GCC does not optimize the argument area. -mshort-data-num Generate smaller data references by making them rela- tive to "r0", which allows loading a value using a single instruction (rather than the usual two). You control which data references are affected by specify- ing num with this option. For example, if you specify -mshort-data-512, then the data references affected are those involving displacements of less than 512 bytes. -mshort-data-num is not effective for num greater than 64k. -mserialize-volatile -mno-serialize-volatile Do, or don't, generate code to guarantee sequential consistency of volatile memory references. By default, consistency is guaranteed. The order of memory references made by the MC88110 processor does not always match the order of the instructions requesting those references. In particu- lar, a load instruction may execute before a preceding store instruction. Such reordering violates sequen- tial consistency of volatile memory references, when there are multiple processors. When consistency must be guaranteed, GCC generates special instructions, as needed, to force execution in the proper order. The MC88100 processor does not reorder memory refer- ences and so always provides sequential consistency. However, by default, GCC generates the special instructions to guarantee consistency even when you use -m88100, so that the code may be run on an MC88110 processor. If you intend to run your code only on the MC88100 processor, you may use -mno-serial- ize-volatile. The extra code generated to guarantee consistency may affect the performance of your application. If you know that you can safely forgo this guarantee, you may use -mno-serialize-volatile. -msvr4 -msvr3 Turn on (-msvr4) or off (-msvr3) compiler extensions related to System V release 4 (SVr4). This controls the following: 1. Which variant of the assembler syntax to emit. 2. -msvr4 makes the C preprocessor recognize #pragma weak that is used on System V release 4. 3. -msvr4 makes GCC issue additional declaration directives used in SVr4. -msvr4 is the default for the m88k-motorola-sysv4 and m88k-dg-dgux m88k configurations. -msvr3 is the default for all other m88k configurations. -mversion-03.00 This option is obsolete, and is ignored. -mno-check-zero-division -mcheck-zero-division Do, or don't, generate code to guarantee that integer division by zero will be detected. By default, detec- tion is guaranteed. Some models of the MC88100 processor fail to trap upon integer division by zero under certain conditions. By default, when compiling code that might be run on such a processor, GCC generates code that explicitly checks for zero-valued divisors and traps with exception num- ber 503 when one is detected. Use of mno-check-zero- division suppresses such checking for code generated to run on an MC88100 processor. GCC assumes that the MC88110 processor correctly detects all instances of integer division by zero. When -m88110 is specified, both -mcheck-zero-division and -mno-check-zero-division are ignored, and no explicit checks for zero-valued divisors are gener- ated. -muse-div-instruction Use the div instruction for signed integer division on the MC88100 processor. By default, the div instruc- tion is not used. On the MC88100 processor the signed integer division instruction div) traps to the operating system on a negative operand. The operating system transparently completes the operation, but at a large cost in execu- tion time. By default, when compiling code that might be run on an MC88100 processor, GCC emulates signed integer division using the unsigned integer division instruction divu), thereby avoiding the large penalty of a trap to the operating system. Such emulation has its own, smaller, execution cost in both time and space. To the extent that your code's important signed integer division operations are performed on two nonnegative operands, it may be desirable to use the div instruction directly. On the MC88110 processor the div instruction (also known as the divs instruction) processes negative operands without trapping to the operating system. When -m88110 is specified, -muse-div-instruction is ignored, and the div instruction is used for signed integer division. Note that the result of dividing "INT_MIN" by -1 is undefined. In particular, the behavior of such a division with and without -muse-div-instruction may differ. -mtrap-large-shift -mhandle-large-shift Include code to detect bit-shifts of more than 31 bits; respectively, trap such shifts or emit code to handle them properly. By default GCC makes no special provision for large bit shifts. -mwarn-passed-structs Warn when a function passes a struct as an argument or result. Structure-passing conventions have changed during the evolution of the C language, and are often the source of portability problems. By default, GCC issues no such warning. IBM RS/6000 and PowerPC Options These -m options are defined for the IBM RS/6000 and Pow- erPC: -mpower -mno-power -mpower2 -mno-power2 -mpowerpc -mno-powerpc -mpowerpc-gpopt -mno-powerpc-gpopt -mpowerpc-gfxopt -mno-powerpc-gfxopt -mpowerpc64 -mno-powerpc64 GCC supports two related instruction set architectures for the RS/6000 and PowerPC. The POWER instruction set are those instructions supported by the rios chip set used in the original RS/6000 systems and the Pow- erPC instruction set is the architecture of the Motorola MPC5xx, MPC6xx, MPC8xx microprocessors, and the IBM 4xx microprocessors. Neither architecture is a subset of the other. How- ever there is a large common subset of instructions supported by both. An MQ register is included in pro- cessors supporting the POWER architecture. You use these options to specify which instructions are available on the processor you are using. The default value of these options is determined when con- figuring GCC. Specifying the -mcpu=cpu_type overrides the specification of these options. We recommend you use the -mcpu=cpu_type option rather than the options listed above. The -mpower option allows GCC to generate instructions that are found only in the POWER architecture and to use the MQ register. Specifying -mpower2 implies -power and also allows GCC to generate instructions that are present in the POWER2 architecture but not the original POWER architecture. The -mpowerpc option allows GCC to generate instruc- tions that are found only in the 32-bit subset of the PowerPC architecture. Specifying -mpowerpc-gpopt implies -mpowerpc and also allows GCC to use the optional PowerPC architecture instructions in the Gen- eral Purpose group, including floating-point square root. Specifying -mpowerpc-gfxopt implies -mpowerpc and also allows GCC to use the optional PowerPC archi- tecture instructions in the Graphics group, including floating-point select. The -mpowerpc64 option allows GCC to generate the additional 64-bit instructions that are found in the full PowerPC64 architecture and to treat GPRs as 64-bit, doubleword quantities. GCC defaults to -mno-powerpc64. If you specify both -mno-power and -mno-powerpc, GCC will use only the instructions in the common subset of both architectures plus some special AIX common-mode calls, and will not use the MQ register. Specifying both -mpower and -mpowerpc permits GCC to use any instruction from either architecture and to allow use of the MQ register; specify this for the Motorola MPC601. -mnew-mnemonics -mold-mnemonics Select which mnemonics to use in the generated assem- bler code. -mnew-mnemonics requests output that uses the assembler mnemonics defined for the PowerPC archi- tecture, while -mold-mnemonics requests the assembler mnemonics defined for the POWER architecture. Instructions defined in only one architecture have only one mnemonic; GCC uses that mnemonic irrespective of which of these options is specified. GCC defaults to the mnemonics appropriate for the architecture in use. Specifying -mcpu=cpu_type some- times overrides the value of these option. Unless you are building a cross-compiler, you should normally not specify either -mnew-mnemonics or -mold-mnemonics, but should instead accept the default. -mcpu=cpu_type Set architecture type, register usage, choice of mnemonics, and instruction scheduling parameters for machine type cpu_type. Supported values for cpu_type are rios, rios1, rsc, rios2, rs64a, 601, 602, 603, 603e, 604, 604e, 620, 630, 740, 750, power, power2, powerpc, 403, 505, 801, 821, 823, and 860 and common. -mcpu=power, -mcpu=power2, -mcpu=powerpc, and -mcpu=powerpc64 specify generic POWER, POWER2, pure 32-bit PowerPC (i.e., not MPC601), and 64-bit PowerPC architecture machine types, with an appropriate, generic processor model assumed for scheduling pur- poses. Specifying any of the following options: -mcpu=rios1, -mcpu=rios2, -mcpu=rsc, -mcpu=power, or -mcpu=power2 enables the -mpower option and disables the -mpowerpc option; -mcpu=601 enables both the -mpower and -mpow- erpc options. All of -mcpu=rs64a, -mcpu=602, -mcpu=603, -mcpu=603e, -mcpu=604, -mcpu=620, -mcpu=630, -mcpu=740, and -mcpu=750 enable the -mpow- erpc option and disable the -mpower option. Exactly similarly, all of -mcpu=403, -mcpu=505, -mcpu=821, -mcpu=860 and -mcpu=powerpc enable the -mpowerpc option and disable the -mpower option. -mcpu=common disables both the -mpower and -mpowerpc options. AIX versions 4 or greater selects -mcpu=common by default, so that code will operate on all members of the RS/6000 POWER and PowerPC families. In that case, GCC will use only the instructions in the common sub- set of both architectures plus some special AIX com- mon-mode calls, and will not use the MQ register. GCC assumes a generic processor model for scheduling pur- poses. Specifying any of the options -mcpu=rios1, -mcpu=rios2, -mcpu=rsc, -mcpu=power, or -mcpu=power2 also disables the new-mnemonics option. Specifying -mcpu=601, -mcpu=602, -mcpu=603, -mcpu=603e, -mcpu=604, -mcpu=620, -mcpu=630, -mcpu=403, -mcpu=505, -mcpu=821, -mcpu=860 or -mcpu=powerpc also enables the new-mnemonics option. Specifying -mcpu=403, -mcpu=821, or -mcpu=860 also enables the -msoft-float option. -mtune=cpu_type Set the instruction scheduling parameters for machine type cpu_type, but do not set the architecture type, register usage, choice of mnemonics like -mcpu=cpu_type would. The same values for cpu_type are used for -mtune=cpu_type as for -mcpu=cpu_type. The -mtune=cpu_type option overrides the -mcpu=cpu_type option in terms of instruction schedul- ing parameters. -mfull-toc -mno-fp-in-toc -mno-sum-in-toc -mminimal-toc Modify generation of the TOC (Table Of Contents), which is created for every executable file. The -mfull-toc option is selected by default. In that case, GCC will allocate at least one TOC entry for each unique non-automatic variable reference in your program. GCC will also place floating-point constants in the TOC. However, only 16,384 entries are avail- able in the TOC. If you receive a linker error message that saying you have overflowed the available TOC space, you can reduce the amount of TOC space used with the -mno-fp-in-toc and -mno-sum-in-toc options. -mno-fp-in-toc prevents GCC from putting floating- point constants in the TOC and -mno-sum-in-toc forces GCC to generate code to calculate the sum of an address and a constant at run-time instead of putting that sum into the TOC. You may specify one or both of these options. Each causes GCC to produce very slightly slower and larger code at the expense of con- serving TOC space. If you still run out of space in the TOC even when you specify both of these options, specify -mminimal-toc instead. This option causes GCC to make only one TOC entry for every file. When you specify this option, GCC will produce code that is slower and larger but which uses extremely little TOC space. You may wish to use this option only on files that contain less frequently executed code. -maix64 -maix32 Enable 64-bit AIX ABI and calling convention: 64-bit pointers, 64-bit "long" type, and the infrastructure needed to support them. Specifying -maix64 implies -mpowerpc64 and -mpowerpc, while -maix32 disables the 64-bit ABI and implies -mno-powerpc64. GCC defaults to -maix32. -mxl-call -mno-xl-call On AIX, pass floating-point arguments to prototyped functions beyond the register save area (RSA) on the stack in addition to argument FPRs. The AIX calling convention was extended but not initially documented to handle an obscure K&R C case of calling a function that takes the address of its arguments with fewer arguments than declared. AIX XL compilers access floating point arguments which do not fit in the RSA from the stack when a subroutine is compiled without optimization. Because always storing floating-point arguments on the stack is inefficient and rarely needed, this option is not enabled by default and only is necessary when calling subroutines compiled by AIX XL compilers without optimization. -mthreads Support AIX Threads. Link an application written to use pthreads with special libraries and startup code to enable the application to run. -mpe Support IBM RS/6000 SP Parallel Environment (PE). Link an application written to use message passing with special startup code to enable the application to run. The system must have PE installed in the stan- dard location (/usr/lpp/ppe.poe/), or the specs file must be overridden with the -specs= option to specify the appropriate directory location. The Parallel Environment does not support threads, so the -mpe option and the -mthreads option are incompatible. -msoft-float -mhard-float Generate code that does not use (uses) the floating- point register set. Software floating point emulation is provided if you use the -msoft-float option, and pass the option to GCC when linking. -mmultiple -mno-multiple Generate code that uses (does not use) the load multi- ple word instructions and the store multiple word instructions. These instructions are generated by default on POWER systems, and not generated on PowerPC systems. Do not use -mmultiple on little endian Pow- erPC systems, since those instructions do not work when the processor is in little endian mode. The exceptions are PPC740 and PPC750 which permit the instructions usage in little endian mode. -mstring -mno-string Generate code that uses (does not use) the load string instructions and the store string word instructions to save multiple registers and do small block moves. These instructions are generated by default on POWER systems, and not generated on PowerPC systems. Do not use -mstring on little endian PowerPC systems, since those instructions do not work when the processor is in little endian mode. The exceptions are PPC740 and PPC750 which permit the instructions usage in little endian mode. -mupdate -mno-update Generate code that uses (does not use) the load or store instructions that update the base register to the address of the calculated memory location. These instructions are generated by default. If you use -mno-update, there is a small window between the time that the stack pointer is updated and the address of the previous frame is stored, which means code that walks the stack frame across interrupts or signals may get corrupted data. -mfused-madd -mno-fused-madd Generate code that uses (does not use) the floating point multiply and accumulate instructions. These instructions are generated by default if hardware floating is used. -mno-bit-align -mbit-align On System V.4 and embedded PowerPC systems do not (do) force structures and unions that contain bit-fields to be aligned to the base type of the bit-field. For example, by default a structure containing nothing but 8 "unsigned" bit-fields of length 1 would be aligned to a 4 byte boundary and have a size of 4 bytes. By using -mno-bit-align, the structure would be aligned to a 1 byte boundary and be one byte in size. -mno-strict-align -mstrict-align On System V.4 and embedded PowerPC systems do not (do) assume that unaligned memory references will be han- dled by the system. -mrelocatable -mno-relocatable On embedded PowerPC systems generate code that allows (does not allow) the program to be relocated to a dif- ferent address at runtime. If you use -mrelocatable on any module, all objects linked together must be compiled with -mrelocatable or -mrelocatable-lib. -mrelocatable-lib -mno-relocatable-lib On embedded PowerPC systems generate code that allows (does not allow) the program to be relocated to a dif- ferent address at runtime. Modules compiled with -mrelocatable-lib can be linked with either modules compiled without -mrelocatable and -mrelocatable-lib or with modules compiled with the -mrelocatable options. -mno-toc -mtoc On System V.4 and embedded PowerPC systems do not (do) assume that register 2 contains a pointer to a global area pointing to the addresses used in the program. -mlittle -mlittle-endian On System V.4 and embedded PowerPC systems compile code for the processor in little endian mode. The -mlittle-endian option is the same as -mlittle. -mbig -mbig-endian On System V.4 and embedded PowerPC systems compile code for the processor in big endian mode. The -mbig-endian option is the same as -mbig. -mcall-sysv On System V.4 and embedded PowerPC systems compile code using calling conventions that adheres to the March 1995 draft of the System V Application Binary Interface, PowerPC processor supplement. This is the default unless you configured GCC using pow- erpc-*-eabiaix. -mcall-sysv-eabi Specify both -mcall-sysv and -meabi options. -mcall-sysv-noeabi Specify both -mcall-sysv and -mno-eabi options. -mcall-aix On System V.4 and embedded PowerPC systems compile code using calling conventions that are similar to those used on AIX. This is the default if you config- ured GCC using powerpc-*-eabiaix. -mcall-solaris On System V.4 and embedded PowerPC systems compile code for the Solaris operating system. -mcall-linux On System V.4 and embedded PowerPC systems compile code for the Linux-based GNU system. -mcall-netbsd On System V.4 and embedded PowerPC systems compile code for the NetBSD operating system. -mprototype -mno-prototype On System V.4 and embedded PowerPC systems assume that all calls to variable argument functions are properly prototyped. Otherwise, the compiler must insert an instruction before every non prototyped call to set or clear bit 6 of the condition code register (CR) to indicate whether floating point values were passed in the floating point registers in case the function takes a variable arguments. With -mprototype, only calls to prototyped variable argument functions will set or clear the bit. -msim On embedded PowerPC systems, assume that the startup module is called sim-crt0.o and that the standard C libraries are libsim.a and libc.a. This is the default for powerpc-*-eabisim. configurations. -mmvme On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libmvme.a and libc.a. -mads On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libads.a and libc.a. -myellowknife On embedded PowerPC systems, assume that the startup module is called crt0.o and the standard C libraries are libyk.a and libc.a. -mvxworks On System V.4 and embedded PowerPC systems, specify that you are compiling for a VxWorks system. -memb On embedded PowerPC systems, set the PPC_EMB bit in the ELF flags header to indicate that eabi extended relocations are used. -meabi -mno-eabi On System V.4 and embedded PowerPC systems do (do not) adhere to the Embedded Applications Binary Interface (eabi) which is a set of modifications to the System V.4 specifications. Selecting -meabi means that the stack is aligned to an 8 byte boundary, a function "__eabi" is called to from "main" to set up the eabi environment, and the -msdata option can use both "r2" and "r13" to point to two separate small data areas. Selecting -mno-eabi means that the stack is aligned to a 16 byte boundary, do not call an initialization function from "main", and the -msdata option will only use "r13" to point to a single small data area. The -meabi option is on by default if you configured GCC using one of the powerpc*-*-eabi* options. -msdata=eabi On System V.4 and embedded PowerPC systems, put small initialized "const" global and static data in the .sdata2 section, which is pointed to by register "r2". Put small initialized non-"const" global and static data in the .sdata section, which is pointed to by register "r13". Put small uninitialized global and static data in the .sbss section, which is adjacent to the .sdata section. The -msdata=eabi option is incom- patible with the -mrelocatable option. The -msdata=eabi option also sets the -memb option. -msdata=sysv On System V.4 and embedded PowerPC systems, put small global and static data in the .sdata section, which is pointed to by register "r13". Put small uninitialized global and static data in the .sbss section, which is adjacent to the .sdata section. The -msdata=sysv option is incompatible with the -mrelocatable option. -msdata=default -msdata On System V.4 and embedded PowerPC systems, if -meabi is used, compile code the same as -msdata=eabi, other- wise compile code the same as -msdata=sysv. -msdata-data On System V.4 and embedded PowerPC systems, put small global and static data in the .sdata section. Put small uninitialized global and static data in the .sbss section. Do not use register "r13" to address small data however. This is the default behavior unless other -msdata options are used. -msdata=none -mno-sdata On embedded PowerPC systems, put all initialized global and static data in the .data section, and all uninitialized data in the .bss section. -G num On embedded PowerPC systems, put global and static items less than or equal to num bytes into the small data or bss sections instead of the normal data or bss section. By default, num is 8. The -G num switch is also passed to the linker. All modules should be com- piled with the same -G num value. -mregnames -mno-regnames On System V.4 and embedded PowerPC systems do (do not) emit register names in the assembly language output using symbolic forms. IBM RT Options These -m options are defined for the IBM RT PC: -min-line-mul Use an in-line code sequence for integer multiplies. This is the default. -mcall-lib-mul Call "lmul$$" for integer multiples. -mfull-fp-blocks Generate full-size floating point data blocks, includ- ing the minimum amount of scratch space recommended by IBM. This is the default. -mminimum-fp-blocks Do not include extra scratch space in floating point data blocks. This results in smaller code, but slower execution, since scratch space must be allocated dynamically. -mfp-arg-in-fpregs Use a calling sequence incompatible with the IBM call- ing convention in which floating point arguments are passed in floating point registers. Note that "varargs.h" and "stdarg.h" will not work with floating point operands if this option is specified. -mfp-arg-in-gregs Use the normal calling convention for floating point arguments. This is the default. -mhc-struct-return Return structures of more than one word in memory, rather than in a register. This provides compatibil- ity with the MetaWare HighC (hc) compiler. Use the option -fpcc-struct-return for compatibility with the Portable C Compiler (pcc). -mnohc-struct-return Return some structures of more than one word in regis- ters, when convenient. This is the default. For com- patibility with the IBM-supplied compilers, use the option -fpcc-struct-return or the option -mhc-struct-return. MIPS Options These -m options are defined for the MIPS family of com- puters: -mcpu=cpu-type Assume the defaults for the machine type cpu-type when scheduling instructions. The choices for cpu-type are r2000, r3000, r3900, r4000, r4100, r4300, r4400, r4600, r4650, r5000, r6000, r8000, and orion. Addi- tionally, the r2000, r3000, r4000, r5000, and r6000 can be abbreviated as r2k (or r2K), r3k, etc. While picking a specific cpu-type will schedule things appropriately for that particular chip, the compiler will not generate any code that does not meet level 1 of the MIPS ISA (instruction set architecture) without a -mipsX or -mabi switch being used. -mips1 Issue instructions from level 1 of the MIPS ISA. This is the default. r3000 is the default cpu-type at this ISA level. -mips2 Issue instructions from level 2 of the MIPS ISA (branch likely, square root instructions). r6000 is the default cpu-type at this ISA level. -mips3 Issue instructions from level 3 of the MIPS ISA (64-bit instructions). r4000 is the default cpu-type at this ISA level. -mips4 Issue instructions from level 4 of the MIPS ISA (con- ditional move, prefetch, enhanced FPU instructions). r8000 is the default cpu-type at this ISA level. -mfp32 Assume that 32 32-bit floating point registers are available. This is the default. -mfp64 Assume that 32 64-bit floating point registers are available. This is the default when the -mips3 option is used. -mgp32 Assume that 32 32-bit general purpose registers are available. This is the default. -mgp64 Assume that 32 64-bit general purpose registers are available. This is the default when the -mips3 option is used. -mint64 Force int and long types to be 64 bits wide. See -mlong32 for an explanation of the default, and the width of pointers. -mlong64 Force long types to be 64 bits wide. See -mlong32 for an explanation of the default, and the width of point- ers. -mlong32 Force long, int, and pointer types to be 32 bits wide. If none of -mlong32, -mlong64, or -mint64 are set, the size of ints, longs, and pointers depends on the ABI and ISA chosen. For -mabi=32, and -mabi=n32, ints and longs are 32 bits wide. For -mabi=64, ints are 32 bits, and longs are 64 bits wide. For -mabi=eabi and either -mips1 or -mips2, ints and longs are 32 bits wide. For -mabi=eabi and higher ISAs, ints are 32 bits, and longs are 64 bits wide. The width of pointer types is the smaller of the width of longs or the width of general purpose registers (which in turn depends on the ISA). -mabi=32 -mabi=o64 -mabi=n32 -mabi=64 -mabi=eabi Generate code for the indicated ABI. The default instruction level is -mips1 for 32, -mips3 for n32, and -mips4 otherwise. Conversely, with -mips1 or -mips2, the default ABI is 32; otherwise, the default ABI is 64. -mmips-as Generate code for the MIPS assembler, and invoke mips- tfile to add normal debug information. This is the default for all platforms except for the OSF/1 refer- ence platform, using the OSF/rose object format. If the either of the -gstabs or -gstabs+ switches are used, the mips-tfile program will encapsulate the stabs within MIPS ECOFF. -mgas Generate code for the GNU assembler. This is the default on the OSF/1 reference platform, using the OSF/rose object format. Also, this is the default if the configure option --with-gnu-as is used. -msplit-addresses -mno-split-addresses Generate code to load the high and low parts of address constants separately. This allows GCC to optimize away redundant loads of the high order bits of addresses. This optimization requires GNU as and GNU ld. This optimization is enabled by default for some embedded targets where GNU as and GNU ld are standard. -mrnames -mno-rnames The -mrnames switch says to output code using the MIPS software names for the registers, instead of the hard- ware names (ie, a0 instead of $4). The only known assembler that supports this option is the Algorith- mics assembler. -mgpopt -mno-gpopt The -mgpopt switch says to write all of the data dec- larations before the instructions in the text section, this allows the MIPS assembler to generate one word memory references instead of using two words for short global or static data items. This is on by default if optimization is selected. -mstats -mno-stats For each non-inline function processed, the -mstats switch causes the compiler to emit one line to the standard error file to print statistics about the pro- gram (number of registers saved, stack size, etc.). -mmemcpy -mno-memcpy The -mmemcpy switch makes all block moves call the appropriate string function (memcpy or bcopy) instead of possibly generating inline code. -mmips-tfile -mno-mips-tfile The -mno-mips-tfile switch causes the compiler not postprocess the object file with the mips-tfile pro- gram, after the MIPS assembler has generated it to add debug support. If mips-tfile is not run, then no local variables will be available to the debugger. In addition, stage2 and stage3 objects will have the tem- porary file names passed to the assembler embedded in the object file, which means the objects will not com- pare the same. The -mno-mips-tfile switch should only be used when there are bugs in the mips-tfile program that prevents compilation. -msoft-float Generate output containing library calls for floating point. Warning: the requisite libraries are not part of GCC. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. -mhard-float Generate output containing floating point instruc- tions. This is the default if you use the unmodified sources. -mabicalls -mno-abicalls Emit (or do not emit) the pseudo operations .abicalls, .cpload, and .cprestore that some System V.4 ports use for position independent code. -mlong-calls -mno-long-calls Do all calls with the JALR instruction, which requires loading up a function's address into a register before the call. You need to use this switch, if you call outside of the current 512 megabyte segment to func- tions that are not through pointers. -mhalf-pic -mno-half-pic Put pointers to extern references into the data sec- tion and load them up, rather than put the references in the text section. -membedded-pic -mno-embedded-pic Generate PIC code suitable for some embedded systems. All calls are made using PC relative address, and all data is addressed using the $gp register. No more than 65536 bytes of global data may be used. This requires GNU as and GNU ld which do most of the work. This currently only works on targets which use ECOFF; it does not work with ELF. -membedded-data -mno-embedded-data Allocate variables to the read-only data section first if possible, then next in the small data section if possible, otherwise in data. This gives slightly slower code than the default, but reduces the amount of RAM required when executing, and thus may be pre- ferred for some embedded systems. -muninit-const-in-rodata -mno-uninit-const-in-rodata When used together with -membedded-data, it will always store uninitialized const variables in the read-only data section. -msingle-float -mdouble-float The -msingle-float switch tells gcc to assume that the floating point coprocessor only supports single preci- sion operations, as on the r4650 chip. The -mdou- ble-float switch permits gcc to use double precision operations. This is the default. -mmad -mno-mad Permit use of the mad, madu and mul instructions, as on the r4650 chip. -m4650 Turns on -msingle-float, -mmad, and, at least for now, -mcpu=r4650. -mips16 -mno-mips16 Enable 16-bit instructions. -mentry Use the entry and exit pseudo ops. This option can only be used with -mips16. -EL Compile code for the processor in little endian mode. The requisite libraries are assumed to exist. -EB Compile code for the processor in big endian mode. The requisite libraries are assumed to exist. -G num Put global and static items less than or equal to num bytes into the small data or bss sections instead of the normal data or bss section. This allows the assembler to emit one word memory reference instruc- tions based on the global pointer (gp or $28), instead of the normal two words used. By default, num is 8 when the MIPS assembler is used, and 0 when the GNU assembler is used. The -G num switch is also passed to the assembler and linker. All modules should be compiled with the same -G num value. -nocpp Tell the MIPS assembler to not run its preprocessor over user assembler files (with a .s suffix) when assembling them. -mfix7000 Pass an option to gas which will cause nops to be inserted if the read of the destination register of an mfhi or mflo instruction occurs in the following two instructions. -no-crt0 Do not include the default crt0. Intel 386 Options These -m options are defined for the i386 family of com- puters: -mcpu=cpu-type Assume the defaults for the machine type cpu-type when scheduling instructions. The choices for cpu-type are i386, i486, i586, i686, pentium, pentiumpro, k6, and athlon While picking a specific cpu-type will schedule things appropriately for that particular chip, the compiler will not generate any code that does not run on the i386 without the -march=cpu-type option being used. i586 is equivalent to pentium and i686 is equivalent to pentiumpro. k6 is the AMD chip as opposed to the Intel ones. -march=cpu-type Generate instructions for the machine type cpu-type. The choices for cpu-type are the same as for -mcpu. Moreover, specifying -march=cpu-type implies -mcpu=cpu-type. -m386 -m486 -mpentium -mpentiumpro Synonyms for -mcpu=i386, -mcpu=i486, -mcpu=pentium, and -mcpu=pentiumpro respectively. These synonyms are deprecated. -mintel-syntax Emit assembly using Intel syntax opcodes instead of AT&T syntax. -mieee-fp -mno-ieee-fp Control whether or not the compiler uses IEEE floating point comparisons. These handle correctly the case where the result of a comparison is unordered. -msoft-float Generate output containing library calls for floating point. Warning: the requisite libraries are not part of GCC. Normally the facilities of the machine's usual C compiler are used, but this can't be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. On machines where a function returns floating point results in the 80387 register stack, some floating point opcodes may be emitted even if -msoft-float is used. -mno-fp-ret-in-387 Do not use the FPU registers for return values of functions. The usual calling convention has functions return val- ues of types "float" and "double" in an FPU register, even if there is no FPU. The idea is that the operat- ing system should emulate an FPU. The option -mno-fp-ret-in-387 causes such values to be returned in ordinary CPU registers instead. -mno-fancy-math-387 Some 387 emulators do not support the "sin", "cos" and "sqrt" instructions for the 387. Specify this option to avoid generating those instructions. This option is the default on FreeBSD. As of revision 2.6.1, these instructions are not generated unless you also use the -ffast-math switch. -malign-double -mno-align-double Control whether GCC aligns "double", "long double", and "long long" variables on a two word boundary or a one word boundary. Aligning "double" variables on a two word boundary will produce code that runs somewhat faster on a Pentium at the expense of more memory. -m128bit-long-double Control the size of "long double" type. i386 applica- tion binary interface specify the size to be 12 bytes, while modern architectures (Pentium and newer) prefer "long double" aligned to 8 or 16 byte boundary. This is impossible to reach with 12 byte long doubles in the array accesses. Warning: if you use the -m128bit-long-double switch, the structures and arrays containing "long double" will change their size as well as function calling convention for function taking "long double" will be modified. -m96bit-long-double Set the size of "long double" to 96 bits as required by the i386 application binary interface. This is the default. -msvr3-shlib -mno-svr3-shlib Control whether GCC places uninitialized locals into "bss" or "data". -msvr3-shlib places these locals into "bss". These options are meaningful only on Sys- tem V Release 3. -mrtd Use a different function-calling convention, in which functions that take a fixed number of arguments return with the "ret" num instruction, which pops their argu- ments while returning. This saves one instruction in the caller since there is no need to pop the arguments there. You can specify that an individual function is called with this calling sequence with the function attribute stdcall. You can also override the -mrtd option by using the function attribute cdecl. Warning: this calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix com- piler. Also, you must provide function prototypes for all functions that take variable numbers of arguments (including "printf"); otherwise incorrect code will be generated for calls to those functions. In addition, seriously incorrect code will result if you call a function with too many arguments. (Nor- mally, extra arguments are harmlessly ignored.) -mreg-alloc=regs Control the default allocation order of integer regis- ters. The string regs is a series of letters specify- ing a register. The supported letters are: "a" allo- cate EAX; "b" allocate EBX; "c" allocate ECX; "d" allocate EDX; "S" allocate ESI; "D" allocate EDI; "B" allocate EBP. This option is deprecated and will not be supported by future releases of gcc. -mregparm=num Control how many registers are used to pass integer arguments. By default, no registers are used to pass arguments, and at most 3 registers can be used. You can control this behavior for a specific function by using the function attribute regparm. Warning: if you use this switch, and num is nonzero, then you must build all modules with the same value, including any libraries. This includes the system libraries and startup modules. -malign-loops=num Align loops to a 2 raised to a num byte boundary. If -malign-loops is not specified, the default is 2 unless gas 2.8 (or later) is being used in which case the default is to align the loop on a 16 byte boundary if it is less than 8 bytes away. -malign-jumps=num Align instructions that are only jumped to to a 2 raised to a num byte boundary. If -malign-jumps is not specified, the default is 2 if optimizing for a 386, and 4 if optimizing for a 486 unless gas 2.8 (or later) is being used in which case the default is to align the instruction on a 16 byte boundary if it is less than 8 bytes away. -malign-functions=num Align the start of functions to a 2 raised to num byte boundary. If -malign-functions is not specified, the default is 2 if optimizing for a 386, and 4 if opti- mizing for a 486. -mpreferred-stack-boundary=num Attempt to keep the stack boundary aligned to a 2 raised to num byte boundary. If -mpre- ferred-stack-boundary is not specified, the default is 4 (16 bytes or 128 bits). The stack is required to be aligned on a 4 byte bound- ary. On Pentium and PentiumPro, "double" and "long double" values should be aligned to an 8 byte boundary (see -malign-double) or suffer significant run time performance penalties. On Pentium III, the Streaming SIMD Extension (SSE) data type "__m128" suffers simi- lar penalties if it is not 16 byte aligned. To ensure proper alignment of this values on the stack, the stack boundary must be as aligned as that required by any value stored on the stack. Further, every function must be generated such that it keeps the stack aligned. Thus calling a function compiled with a higher preferred stack boundary from a function compiled with a lower preferred stack boundary will most likely misalign the stack. It is recommended that libraries that use callbacks always use the default setting. This extra alignment does consume extra stack space. Code that is sensitive to stack space usage, such as embedded systems and operating system kernels, may want to reduce the preferred alignment to -mpre- ferred-stack-boundary=2. -mpush-args -mno-push-args Use PUSH operations to store outgoing parameters. This method is shorter and usually equally fast as method using SUB/MOV operations and is enabled by default. In some cases disabling it may improve per- formance because of improved scheduling and reduced dependencies. -maccumulate-outgoing-args If enabled, the maximum amount of space required for outgoing arguments will be computed in the function prologue. This is faster on most modern CPUs because of reduced dependencies, improved scheduling and reduced stack usage when preferred stack boundary is not equal to 2. The drawback is a notable increase in code size. This switch implies -mno-push-args. -mthreads Support thread-safe exception handling on Mingw32. Code that relies on thread-safe exception handling must compile and link all code with the -mthreads option. When compiling, -mthreads defines -D_MT; when linking, it links in a special thread helper library -lmingwthrd which cleans up per thread exception han- dling data. -mno-align-stringops Do not align destination of inlined string operations. This switch reduces code size and improves performance in case the destination is already aligned, but gcc don't know about it. -minline-all-stringops By default GCC inlines string operations only when destination is known to be aligned at least to 4 byte boundary. This enables more inlining, increase code size, but may improve performance of code that depends on fast memcpy, strlen and memset for short lengths. -momit-leaf-frame-pointer Don't keep the frame pointer in a register for leaf functions. This avoids the instructions to save, set up and restore frame pointers and makes an extra reg- ister available in leaf functions. The option -fomit-frame-pointer removes the frame pointer for all functions which might make debugging harder. HPPA Options These -m options are defined for the HPPA family of com- puters: -march=architecture-type Generate code for the specified architecture. The choices for architecture-type are 1.0 for PA 1.0, 1.1 for PA 1.1, and 2.0 for PA 2.0 processors. Refer to /usr/lib/sched.models on an HP-UX system to determine the proper architecture option for your machine. Code compiled for lower numbered architectures will run on higher numbered architectures, but not the other way around. PA 2.0 support currently requires gas snapshot 19990413 or later. The next release of binutils (cur- rent is 2.9.1) will probably contain PA 2.0 support. -mpa-risc-1-0 -mpa-risc-1-1 -mpa-risc-2-0 Synonyms for -march=1.0, -march=1.1, and -march=2.0 respectively. -mbig-switch Generate code suitable for big switch tables. Use this option only if the assembler/linker complain about out of range branches within a switch table. -mjump-in-delay Fill delay slots of function calls with unconditional jump instructions by modifying the return pointer for the function call to be the target of the conditional jump. -mdisable-fpregs Prevent floating point registers from being used in any manner. This is necessary for compiling kernels which perform lazy context switching of floating point registers. If you use this option and attempt to per- form floating point operations, the compiler will abort. -mdisable-indexing Prevent the compiler from using indexing address modes. This avoids some rather obscure problems when compiling MIG generated code under MACH. -mno-space-regs Generate code that assumes the target has no space registers. This allows GCC to generate faster indi- rect calls and use unscaled index address modes. Such code is suitable for level 0 PA systems and ker- nels. -mfast-indirect-calls Generate code that assumes calls never cross space boundaries. This allows GCC to emit code which per- forms faster indirect calls. This option will not work in the presence of shared libraries or nested functions. -mlong-load-store Generate 3-instruction load and store sequences as sometimes required by the HP-UX 10 linker. This is equivalent to the +k option to the HP compilers. -mportable-runtime Use the portable calling conventions proposed by HP for ELF systems. -mgas Enable the use of assembler directives only GAS under- stands. -mschedule=cpu-type Schedule code according to the constraints for the machine type cpu-type. The choices for cpu-type are 700 7100, 7100LC, 7200, and 8000. Refer to /usr/lib/sched.models on an HP-UX system to determine the proper scheduling option for your machine. -mlinker-opt Enable the optimization pass in the HPUX linker. Note this makes symbolic debugging impossible. It also triggers a bug in the HPUX 8 and HPUX 9 linkers in which they give bogus error messages when linking some programs. -msoft-float Generate output containing library calls for floating point. Warning: the requisite libraries are not available for all HPPA targets. Normally the facili- ties of the machine's usual C compiler are used, but this cannot be done directly in cross-compilation. You must make your own arrangements to provide suit- able library functions for cross-compilation. The embedded target hppa1.1-*-pro does provide software floating point support. -msoft-float changes the calling convention in the output file; therefore, it is only useful if you com- pile all of a program with this option. In particu- lar, you need to compile libgcc.a, the library that comes with GCC, with -msoft-float in order for this to work. Intel 960 Options These -m options are defined for the Intel 960 implementa- tions: -mcpu-type Assume the defaults for the machine type cpu-type for some of the other options, including instruction scheduling, floating point support, and addressing modes. The choices for cpu-type are ka, kb, mc, ca, cf, sa, and sb. The default is kb. -mnumerics -msoft-float The -mnumerics option indicates that the processor does support floating-point instructions. The -msoft-float option indicates that floating-point sup- port should not be assumed. -mleaf-procedures -mno-leaf-procedures Do (or do not) attempt to alter leaf procedures to be callable with the "bal" instruction as well as "call". This will result in more efficient code for explicit calls when the "bal" instruction can be substituted by the assembler or linker, but less efficient code in other cases, such as calls via function pointers, or using a linker that doesn't support this optimization. -mtail-call -mno-tail-call Do (or do not) make additional attempts (beyond those of the machine-independent portions of the compiler) to optimize tail-recursive calls into branches. You may not want to do this because the detection of cases where this is not valid is not totally complete. The default is -mno-tail-call. -mcomplex-addr -mno-complex-addr Assume (or do not assume) that the use of a complex addressing mode is a win on this implementation of the i960. Complex addressing modes may not be worthwhile on the K-series, but they definitely are on the C-series. The default is currently -mcomplex-addr for all processors except the CB and CC. -mcode-align -mno-code-align Align code to 8-byte boundaries for faster fetching (or don't bother). Currently turned on by default for C-series implementations only. -mic-compat -mic2.0-compat -mic3.0-compat Enable compatibility with iC960 v2.0 or v3.0. -masm-compat -mintel-asm Enable compatibility with the iC960 assembler. -mstrict-align -mno-strict-align Do not permit (do permit) unaligned accesses. -mold-align Enable structure-alignment compatibility with Intel's gcc release version 1.3 (based on gcc 1.37). This option implies -mstrict-align. -mlong-double-64 Implement type long double as 64-bit floating point numbers. Without the option long double is imple- mented by 80-bit floating point numbers. The only reason we have it because there is no 128-bit long double support in fp-bit.c yet. So it is only useful for people using soft-float targets. Otherwise, we should recommend against use of it. DEC Alpha Options These -m options are defined for the DEC Alpha implementa- tions: -mno-soft-float -msoft-float Use (do not use) the hardware floating-point instruc- tions for floating-point operations. When -msoft-float is specified, functions in libgcc1.c will be used to perform floating-point operations. Unless they are replaced by routines that emulate the float- ing-point operations, or compiled in such a way as to call such emulations routines, these routines will issue floating-point operations. If you are compil- ing for an Alpha without floating-point operations, you must ensure that the library is built so as not to call them. Note that Alpha implementations without floating-point operations are required to have floating-point regis- ters. -mfp-reg -mno-fp-regs Generate code that uses (does not use) the floating- point register set. -mno-fp-regs implies -msoft-float. If the floating-point register set is not used, floating point operands are passed in inte- ger registers as if they were integers and floating- point results are passed in $0 instead of $f0. This is a non-standard calling sequence, so any function with a floating-point argument or return value called by code compiled with -mno-fp-regs must also be com- piled with that option. A typical use of this option is building a kernel that does not use, and hence need not save and restore, any floating-point registers. -mieee The Alpha architecture implements floating-point hard- ware optimized for maximum performance. It is mostly compliant with the IEEE floating point standard. How- ever, for full compliance, software assistance is required. This option generates code fully IEEE com- pliant code except that the inexact-flag is not main- tained (see below). If this option is turned on, the CPP macro "_IEEE_FP" is defined during compilation. The option is a shorthand for: -D_IEEE_FP -mfp-trap-mode=su -mtrap-precision=i -mieee-confor- mant. The resulting code is less efficient but is able to correctly support denormalized numbers and exceptional IEEE values such as not-a-number and plus/minus infinity. Other Alpha compilers call this option -ieee_with_no_inexact. -mieee-with-inexact This is like -mieee except the generated code also maintains the IEEE inexact-flag. Turning on this option causes the generated code to implement fully- compliant IEEE math. The option is a shorthand for -D_IEEE_FP -D_IEEE_FP_INEXACT plus the three follow- ing: -mieee-conformant, -mfp-trap-mode=sui, and -mtrap-precision=i. On some Alpha implementations the resulting code may execute significantly slower than the code generated by default. Since there is very little code that depends on the inexact-flag, you should normally not specify this option. Other Alpha compilers call this option -ieee_with_inexact. -mfp-trap-mode=trap-mode This option controls what floating-point related traps are enabled. Other Alpha compilers call this option -fptm trap-mode. The trap mode can be set to one of four values: n This is the default (normal) setting. The only traps that are enabled are the ones that cannot be disabled in software (e.g., division by zero trap). u In addition to the traps enabled by n, underflow traps are enabled as well. su Like su, but the instructions are marked to be safe for software completion (see Alpha architec- ture manual for details). sui Like su, but inexact traps are enabled as well. -mfp-rounding-mode=rounding-mode Selects the IEEE rounding mode. Other Alpha compilers call this option -fprm rounding-mode. The rounding- mode can be one of: n Normal IEEE rounding mode. Floating point numbers are rounded towards the nearest machine number or towards the even machine number in case of a tie. m Round towards minus infinity. c Chopped rounding mode. Floating point numbers are rounded towards zero. d Dynamic rounding mode. A field in the floating point control register (fpcr, see Alpha architec- ture reference manual) controls the rounding mode in effect. The C library initializes this regis- ter for rounding towards plus infinity. Thus, unless your program modifies the fpcr, d corre- sponds to round towards plus infinity. -mtrap-precision=trap-precision In the Alpha architecture, floating point traps are imprecise. This means without software assistance it is impossible to recover from a floating trap and pro- gram execution normally needs to be terminated. GCC can generate code that can assist operating system trap handlers in determining the exact location that caused a floating point trap. Depending on the requirements of an application, different levels of precisions can be selected: p Program precision. This option is the default and means a trap handler can only identify which pro- gram caused a floating point exception. f Function precision. The trap handler can deter- mine the function that caused a floating point exception. i Instruction precision. The trap handler can determine the exact instruction that caused a floating point exception. Other Alpha compilers provide the equivalent options called -scope_safe and -resumption_safe. -mieee-conformant This option marks the generated code as IEEE confor- mant. You must not use this option unless you also specify -mtrap-precision=i and either -mfp-trap-mode=su or -mfp-trap-mode=sui. Its only effect is to emit the line .eflag 48 in the function prologue of the generated assembly file. Under DEC Unix, this has the effect that IEEE-conformant math library routines will be linked in. -mbuild-constants Normally GCC examines a 32- or 64-bit integer constant to see if it can construct it from smaller constants in two or three instructions. If it cannot, it will output the constant as a literal and generate code to load it from the data segment at runtime. Use this option to require GCC to construct all inte- ger constants using code, even if it takes more instructions (the maximum is six). You would typically use this option to build a shared library dynamic loader. Itself a shared library, it must relocate itself in memory before it can find the variables and constants in its own data segment. -malpha-as -mgas Select whether to generate code to be assembled by the vendor-supplied assembler (-malpha-as) or by the GNU assembler -mgas. -mbwx -mno-bwx -mcix -mno-cix -mmax -mno-max Indicate whether GCC should generate code to use the optional BWX, CIX, and MAX instruction sets. The default is to use the instruction sets supported by the CPU type specified via -mcpu= option or that of the CPU on which GCC was built if none was specified. -mcpu=cpu_type Set the instruction set, register set, and instruction scheduling parameters for machine type cpu_type. You can specify either the EV style name or the corre- sponding chip number. GCC supports scheduling parame- ters for the EV4 and EV5 family of processors and will choose the default values for the instruction set from the processor you specify. If you do not specify a processor type, GCC will default to the processor on which the compiler was built. Supported values for cpu_type are ev4 21064 Schedules as an EV4 and has no instruction set extensions. ev5 21164 Schedules as an EV5 and has no instruction set extensions. ev56 21164a Schedules as an EV5 and supports the BWX exten- sion. pca56 21164pc 21164PC Schedules as an EV5 and supports the BWX and MAX extensions. ev6 21264 Schedules as an EV5 (until Digital releases the scheduling parameters for the EV6) and supports the BWX, CIX, and MAX extensions. -mmemory-latency=time Sets the latency the scheduler should assume for typi- cal memory references as seen by the application. This number is highly dependent on the memory access patterns used by the application and the size of the external cache on the machine. Valid options for time are number A decimal number representing clock cycles. L1 L2 L3 main The compiler contains estimates of the number of clock cycles for ``typical'' EV4 & EV5 hardware for the Level 1, 2 & 3 caches (also called Dcache, Scache, and Bcache), as well as to main memory. Note that L3 is only valid for EV5. Clipper Options These -m options are defined for the Clipper implementa- tions: -mc300 Produce code for a C300 Clipper processor. This is the default. -mc400 Produce code for a C400 Clipper processor i.e. use floating point registers f8---f15. H8/300 Options These -m options are defined for the H8/300 implementa- tions: -mrelax Shorten some address references at link time, when possible; uses the linker option -relax. -mh Generate code for the H8/300H. -ms Generate code for the H8/S. -ms2600 Generate code for the H8/S2600. This switch must be used with -ms. -mint32 Make "int" data 32 bits by default. -malign-300 On the H8/300H and H8/S, use the same alignment rules as for the H8/300. The default for the H8/300H and H8/S is to align longs and floats on 4 byte bound- aries. -malign-300 causes them to be aligned on 2 byte boundaries. This option has no effect on the H8/300. SH Options These -m options are defined for the SH implementations: -m1 Generate code for the SH1. -m2 Generate code for the SH2. -m3 Generate code for the SH3. -m3e Generate code for the SH3e. -m4-nofpu Generate code for the SH4 without a floating-point unit. -m4-single-only Generate code for the SH4 with a floating-point unit that only supports single-precision arithmetic. -m4-single Generate code for the SH4 assuming the floating-point unit is in single-precision mode by default. -m4 Generate code for the SH4. -mb Compile code for the processor in big endian mode. -ml Compile code for the processor in little endian mode. -mdalign Align doubles at 64-bit boundaries. Note that this changes the calling conventions, and thus some func- tions from the standard C library will not work unless you recompile it first with -mdalign. -mrelax Shorten some address references at link time, when possible; uses the linker option -relax. -mbigtable Use 32-bit offsets in "switch" tables. The default is to use 16-bit offsets. -mfmovd Enable the use of the instruction "fmovd". -mhitachi Comply with the calling conventions defined by Hitachi. -mnomacsave Mark the "MAC" register as call-clobbered, even if -mhitachi is given. -mieee Increase IEEE-compliance of floating-point code. -misize Dump instruction size and location in the assembly code. -mpadstruct This option is deprecated. It pads structures to mul- tiple of 4 bytes, which is incompatible with the SH ABI. -mspace Optimize for space instead of speed. Implied by -Os. -mprefergot When generating position-independent code, emit func- tion calls using the Global Offset Table instead of the Procedure Linkage Table. -musermode Generate a library function call to invalidate instruction cache entries, after fixing up a trampo- line. This library function call doesn't assume it can write to the whole memory address space. This is the default when the target is "sh-*-linux*". Options for System V These additional options are available on System V Release 4 for compatibility with other compilers on those systems: -G Create a shared object. It is recommended that -sym- bolic or -shared be used instead. -Qy Identify the versions of each tool used by the com- piler, in a ".ident" assembler directive in the out- put. -Qn Refrain from adding ".ident" directives to the output file (this is the default). -YP,dirs Search the directories dirs, and no others, for libraries specified with -l. -Ym,dir Look in the directory dir to find the M4 preprocessor. The assembler uses this option. TMS320C3x/C4x Options These -m options are defined for TMS320C3x/C4x implementa- tions: -mcpu=cpu_type Set the instruction set, register set, and instruction scheduling parameters for machine type cpu_type. Sup- ported values for cpu_type are c30, c31, c32, c40, and c44. The default is c40 to generate code for the TMS320C40. -mbig-memory -mbig -msmall-memory -msmall Generates code for the big or small memory model. The small memory model assumed that all data fits into one 64K word page. At run-time the data page (DP) regis- ter must be set to point to the 64K page containing the .bss and .data program sections. The big memory model is the default and requires reloading of the DP register for every direct memory access. -mbk -mno-bk Allow (disallow) allocation of general integer operands into the block count register BK. -mdb -mno-db Enable (disable) generation of code using decrement and branch, DBcond(d), instructions. This is enabled by default for the C4x. To be on the safe side, this is disabled for the C3x, since the maximum iteration count on the C3x is 2^23 + 1 (but who iterates loops more than 2^23 times on the C3x?). Note that GCC will try to reverse a loop so that it can utilise the decrement and branch instruction, but will give up if there is more than one memory reference in the loop. Thus a loop where the loop counter is decremented can generate slightly more efficient code, in cases where the RPTB instruction cannot be utilised. -mdp-isr-reload -mparanoid Force the DP register to be saved on entry to an interrupt service routine (ISR), reloaded to point to the data section, and restored on exit from the ISR. This should not be required unless someone has vio- lated the small memory model by modifying the DP reg- ister, say within an object library. -mmpyi -mno-mpyi For the C3x use the 24-bit MPYI instruction for inte- ger multiplies instead of a library call to guarantee 32-bit results. Note that if one of the operands is a constant, then the multiplication will be performed using shifts and adds. If the -mmpyi option is not specified for the C3x, then squaring operations are performed inline instead of a library call. -mfast-fix -mno-fast-fix The C3x/C4x FIX instruction to convert a floating point value to an integer value chooses the nearest integer less than or equal to the floating point value rather than to the nearest integer. Thus if the floating point number is negative, the result will be incorrectly truncated an additional code is necessary to detect and correct this case. This option can be used to disable generation of the additional code required to correct the result. -mrptb -mno-rptb Enable (disable) generation of repeat block sequences using the RPTB instruction for zero overhead looping. The RPTB construct is only used for innermost loops that do not call functions or jump across the loop boundaries. There is no advantage having nested RPTB loops due to the overhead required to save and restore the RC, RS, and RE registers. This is enabled by default with -O2. -mrpts=count -mno-rpts Enable (disable) the use of the single instruction repeat instruction RPTS. If a repeat block contains a single instruction, and the loop count can be guaran- teed to be less than the value count, GCC will emit a RPTS instruction instead of a RPTB. If no value is specified, then a RPTS will be emitted even if the loop count cannot be determined at compile time. Note that the repeated instruction following RPTS does not have to be reloaded from memory each iteration, thus freeing up the CPU buses for operands. However, since interrupts are blocked by this instruction, it is dis- abled by default. -mloop-unsigned -mno-loop-unsigned The maximum iteration count when using RPTS and RPTB (and DB on the C40) is 2^31 + 1 since these instruc- tions test if the iteration count is negative to ter- minate the loop. If the iteration count is unsigned there is a possibility than the 2^31 + 1 maximum iter- ation count may be exceeded. This switch allows an unsigned iteration count. -mti Try to emit an assembler syntax that the TI assembler (asm30) is happy with. This also enforces compatibil- ity with the API employed by the TI C3x C compiler. For example, long doubles are passed as structures rather than in floating point registers. -mregparm -mmemparm Generate code that uses registers (stack) for passing arguments to functions. By default, arguments are passed in registers where possible rather than by pushing arguments on to the stack. -mparallel-insns -mno-parallel-insns Allow the generation of parallel instructions. This is enabled by default with -O2. -mparallel-mpy -mno-parallel-mpy Allow the generation of MPY||ADD and MPY||SUB parallel instructions, provided -mparallel-insns is also speci- fied. These instructions have tight register con- straints which can pessimize the code generation of large functions. V850 Options These -m options are defined for V850 implementations: -mlong-calls -mno-long-calls Treat all calls as being far away (near). If calls are assumed to be far away, the compiler will always load the functions address up into a register, and call indirect through the pointer. -mno-ep -mep Do not optimize (do optimize) basic blocks that use the same index pointer 4 or more times to copy pointer into the "ep" register, and use the shorter "sld" and "sst" instructions. The -mep option is on by default if you optimize. -mno-prolog-function -mprolog-function Do not use (do use) external functions to save and restore registers at the prolog and epilog of a func- tion. The external functions are slower, but use less code space if more than one function saves the same number of registers. The -mprolog-function option is on by default if you optimize. -mspace Try to make the code as small as possible. At pre- sent, this just turns on the -mep and -mprolog-func- tion options. -mtda=n Put static or global variables whose size is n bytes or less into the tiny data area that register "ep" points to. The tiny data area can hold up to 256 bytes in total (128 bytes for byte references). -msda=n Put static or global variables whose size is n bytes or less into the small data area that register "gp" points to. The small data area can hold up to 64 kilobytes. -mzda=n Put static or global variables whose size is n bytes or less into the first 32 kilobytes of memory. -mv850 Specify that the target processor is the V850. -mbig-switch Generate code suitable for big switch tables. Use this option only if the assembler/linker complain about out of range branches within a switch table. ARC Options These options are defined for ARC implementations: -EL Compile code for little endian mode. This is the default. -EB Compile code for big endian mode. -mmangle-cpu Prepend the name of the cpu to all public symbol names. In multiple-processor systems, there are many ARC variants with different instruction and register set characteristics. This flag prevents code compiled for one cpu to be linked with code compiled for another. No facility exists for handling variants that are ``almost identical''. This is an all or nothing option. -mcpu=cpu Compile code for ARC variant cpu. Which variants are supported depend on the configuration. All variants support -mcpu=base, this is the default. -mtext=text-section -mdata=data-section -mrodata=readonly-data-section Put functions, data, and readonly data in text-sec- tion, data-section, and readonly-data-section respec- tively by default. This can be overridden with the "section" attribute. NS32K Options These are the -m options defined for the 32000 series. The default values for these options depends on which style of 32000 was selected when the compiler was config- ured; the defaults for the most common choices are given below. -m32032 -m32032 Generate output for a 32032. This is the default when the compiler is configured for 32032 and 32016 based systems. -m32332 -m32332 Generate output for a 32332. This is the default when the compiler is configured for 32332-based systems. -m32532 -m32532 Generate output for a 32532. This is the default when the compiler is configured for 32532-based systems. -m32081 Generate output containing 32081 instructions for floating point. This is the default for all systems. -m32381 Generate output containing 32381 instructions for floating point. This also implies -m32081. The 32381 is only compatible with the 32332 and 32532 cpus. This is the default for the pc532-netbsd configura- tion. -mmulti-add Try and generate multiply-add floating point instruc- tions "polyF" and "dotF". This option is only avail- able if the -m32381 option is in effect. Using these instructions requires changes to register allocation which generally has a negative impact on performance. This option should only be enabled when compiling code particularly likely to make heavy use of multiply-add instructions. -mnomulti-add Do not try and generate multiply-add floating point instructions "polyF" and "dotF". This is the default on all platforms. -msoft-float Generate output containing library calls for floating point. Warning: the requisite libraries may not be available. -mnobitfield Do not use the bit-field instructions. On some machines it is faster to use shifting and masking operations. This is the default for the pc532. -mbitfield Do use the bit-field instructions. This is the default for all platforms except the pc532. -mrtd Use a different function-calling convention, in which functions that take a fixed number of arguments return pop their arguments on return with the "ret" instruc- tion. This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix com- piler. Also, you must provide function prototypes for all functions that take variable numbers of arguments (including "printf"); otherwise incorrect code will be generated for calls to those functions. In addition, seriously incorrect code will result if you call a function with too many arguments. (Nor- mally, extra arguments are harmlessly ignored.) This option takes its name from the 680x0 "rtd" instruction. -mregparam Use a different function-calling convention where the first two arguments are passed in registers. This calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix compiler. -mnoregparam Do not pass any arguments in registers. This is the default for all targets. -msb It is OK to use the sb as an index register which is always loaded with zero. This is the default for the pc532-netbsd target. -mnosb The sb register is not available for use or has not been initialized to zero by the run time system. This is the default for all targets except the pc532-netbsd. It is also implied whenever -mhimem or -fpic is set. -mhimem Many ns32000 series addressing modes use displacements of up to 512MB. If an address is above 512MB then displacements from zero can not be used. This option causes code to be generated which can be loaded above 512MB. This may be useful for operating systems or ROM code. -mnohimem Assume code will be loaded in the first 512MB of vir- tual address space. This is the default for all plat- forms. AVR Options These options are defined for AVR implementations: -mmcu=mcu Specify ATMEL AVR instruction set or MCU type. Instruction set avr1 is for the minimal AVR core, not supported by the C compiler, only for assembler pro- grams (MCU types: at90s1200, attiny10, attiny11, attiny12, attiny15, attiny28). Instruction set avr2 (default) is for the classic AVR core with up to 8K program memory space (MCU types: at90s2313, at90s2323, attiny22, at90s2333, at90s2343, at90s4414, at90s4433, at90s4434, at90s8515, at90c8534, at90s8535). Instruction set avr3 is for the classic AVR core with up to 128K program memory space (MCU types: atmega103, atmega603). Instruction set avr4 is for the enhanced AVR core with up to 8K program memory space (MCU types: atmega83, atmega85). Instruction set avr5 is for the enhanced AVR core with up to 128K program memory space (MCU types: atmega161, atmega163, atmega32, at94k). -msize Output instruction sizes to the asm file. -minit-stack=N Specify the initial stack address, which may be a symbol or numeric value, __stack is the default. -mno-interrupts Generated code is not compatible with hardware inter- rupts. Code size will be smaller. -mcall-prologues Functions prologues/epilogues expanded as call to appropriate subroutines. Code size will be smaller. -mno-tablejump Do not generate tablejump insns which sometimes increase code size. -mtiny-stack Change only the low 8 bits of the stack pointer. MCore Options These are the -m options defined for the Motorola M*Core processors. -mhardlit -mhardlit -mno-hardlit Inline constants into the code stream if it can be done in two instructions or less. -mdiv -mdiv -mno-div Use the divide instruction. (Enabled by default). -mrelax-immediate -mrelax-immediate -mno-relax-immediate Allow arbitrary sized immediates in bit operations. -mwide-bitfields -mwide-bitfields -mno-wide-bitfields Always treat bit-fields as int-sized. -m4byte-functions -m4byte-functions -mno-4byte-functions Force all functions to be aligned to a four byte boundary. -mcallgraph-data -mcallgraph-data -mno-callgraph-data Emit callgraph information. -mslow-bytes -mslow-bytes -mno-slow-bytes Prefer word access when reading byte quantities. -mlittle-endian -mlittle-endian -mbig-endian Generate code for a little endian target. -m210 -m210 -m340 Generate code for the 210 processor. IA-64 Options These are the -m options defined for the Intel IA-64 architecture. -mbig-endian Generate code for a big endian target. This is the default for HPUX. -mlittle-endian Generate code for a little endian target. This is the default for AIX5 and Linux. -mgnu-as -mno-gnu-as Generate (or don't) code for the GNU assembler. This is the default. -mgnu-ld -mno-gnu-ld Generate (or don't) code for the GNU linker. This is the default. -mno-pic Generate code that does not use a global pointer reg- ister. The result is not position independent code, and violates the IA-64 ABI. -mvolatile-asm-stop -mno-volatile-asm-stop Generate (or don't) a stop bit immediately before and after volatile asm statements. -mb-step Generate code that works around Itanium B step errata. -mregister-names -mno-register-names Generate (or don't) in, loc, and out register names for the stacked registers. This may make assembler output more readable. -mno-sdata -msdata Disable (or enable) optimizations that use the small data section. This may be useful for working around optimizer bugs. -mconstant-gp Generate code that uses a single constant global pointer value. This is useful when compiling kernel code. -mauto-pic Generate code that is self-relocatable. This implies -mconstant-gp. This is useful when compiling firmware code. -minline-divide-min-latency Generate code for inline divides using the minimum latency algorithm. -minline-divide-max-throughput Generate code for inline divides using the maximum throughput algorithm. -mno-dwarf2-asm -mdwarf2-asm Don't (or do) generate assembler code for the DWARF2 line number debugging info. This may be useful when not using the GNU assembler. -mfixed-range=register-range Generate code treating the given register range as fixed registers. A fixed register is one that the register allocator can not use. This is useful when compiling kernel code. A register range is specified as two registers separated by a dash. Multiple regis- ter ranges can be specified separated by a comma. D30V Options These -m options are defined for D30V implementations: -mextmem Link the .text, .data, .bss, .strings, .rodata, .rodata1, .data1 sections into external memory, which starts at location 0x80000000. -mextmemory Same as the -mextmem switch. -monchip Link the .text section into onchip text memory, which starts at location 0x0. Also link .data, .bss, .strings, .rodata, .rodata1, .data1 sections into onchip data memory, which starts at location 0x20000000. -mno-asm-optimize -masm-optimize Disable (enable) passing -O to the assembler when optimizing. The assembler uses the -O option to auto- matically parallelize adjacent short instructions where possible. -mbranch-cost=n Increase the internal costs of branches to n. Higher costs means that the compiler will issue more instruc- tions to avoid doing a branch. The default is 2. -mcond-exec=n Specify the maximum number of conditionally executed instructions that replace a branch. The default is 4. S/390 and zSeries Options These are the -m options defined for the S/390 and zSeries architecture. -mhard-float -msoft-float Use (do not use) the hardware floating-point instruc- tions and registers for floating-point operations. When -msoft-float is specified, functions in libgcc.a will be used to perform floating-point operations. When -mhard-float is specified, the compiler generates IEEE floating-point instructions. This is the default. -mbackchain -mno-backchain Generate (or do not generate) code which maintains an explicit backchain within the stack frame that points to the caller's frame. This is currently needed to allow debugging. The default is to generate the backchain. -msmall-exec -mno-small-exec Generate (or do not generate) code using the "bras" instruction to do subroutine calls. This only works reliably if the total executable size does not exceed 64k. The default is to use the "basr" instruction instead, which does not have this limitation. -m64 -m31 When -m31 is specified, generate code compliant to the Linux for S/390 ABI. When -m64 is specified, generate code compliant to the Linux for zSeries ABI. This allows GCC in particular to generate 64-bit instruc- tions. For the s390 targets, the default is -m31, while the s390x targets default to -m64. -mmvcle -mno-mvcle Generate (or do not generate) code using the "mvcle" instruction to perform block moves. When -mno-mvcle is specifed, use a "mvc" loop instead. This is the default. -mdebug -mno-debug Print (or do not print) additional debug information when compiling. The default is to not print debug information. Xtensa Options The Xtensa architecture is designed to support many dif- ferent configurations. The compiler's default options can be set to match a particular Xtensa configuration by copy- ing a configuration file into the GCC sources when build- ing GCC. The options below may be used to override the default options. -mbig-endian -mlittle-endian Specify big-endian or little-endian byte ordering for the target Xtensa processor. -mdensity -mno-density Enable or disable use of the optional Xtensa code den- sity instructions. -mmac16 -mno-mac16 Enable or disable use of the Xtensa MAC16 option. When enabled, GCC will generate MAC16 instructions from standard C code, with the limitation that it will use neither the MR register file nor any instruction that operates on the MR registers. When this option is disabled, GCC will translate 16-bit multiply/accumulate operations to a combination of core instructions and library calls, depending on whether any other multiplier options are enabled. -mmul16 -mno-mul16 Enable or disable use of the 16-bit integer multiplier option. When enabled, the compiler will generate 16-bit multiply instructions for multiplications of 16 bits or smaller in standard C code. When this option is disabled, the compiler will either use 32-bit mul- tiply or MAC16 instructions if they are available or generate library calls to perform the multiply opera- tions using shifts and adds. -mmul32 -mno-mul32 Enable or disable use of the 32-bit integer multiplier option. When enabled, the compiler will generate 32-bit multiply instructions for multiplications of 32 bits or smaller in standard C code. When this option is disabled, the compiler will generate library calls to perform the multiply operations using either shifts and adds or 16-bit multiply instructions if they are available. -mnsa -mno-nsa Enable or disable use of the optional normalization shift amount ("NSA") instructions to implement the built-in "ffs" function. -mminmax -mno-minmax Enable or disable use of the optional minimum and max- imum value instructions. -msext -mno-sext Enable or disable use of the optional sign extend ("SEXT") instruction. -mbooleans -mno-booleans Enable or disable support for the boolean register file used by Xtensa coprocessors. This is not typi- cally useful by itself but may be required for other options that make use of the boolean registers (e.g., the floating-point option). -mhard-float -msoft-float Enable or disable use of the floating-point option. When enabled, GCC generates floating-point instruc- tions for 32-bit "float" operations. When this option is disabled, GCC generates library calls to emulate 32-bit floating-point operations using integer instructions. Regardless of this option, 64-bit "dou- ble" operations are always emulated with calls to library functions. -mfused-madd -mno-fused-madd Enable or disable use of fused multiply/add and multi- ply/subtract instructions in the floating-point option. This has no effect if the floating-point option is not also enabled. Disabling fused multi- ply/add and multiply/subtract instructions forces the compiler to use separate instructions for the multiply and add/subtract operations. This may be desirable in some cases where strict IEEE 754-compliant results are required: the fused multiply add/subtract instructions do not round the intermediate result, thereby produc- ing results with more bits of precision than specified by the IEEE standard. Disabling fused multiply add/subtract instructions also ensures that the pro- gram output is not sensitive to the compiler's ability to combine multiply and add/subtract operations. -mserialize-volatile -mno-serialize-volatile When this option is enabled, GCC inserts "MEMW" instructions before "volatile" memory references to guarantee sequential consistency. The default is -mserialize-volatile. Use -mno-serialize-volatile to omit the "MEMW" instructions. -mtext-section-literals -mno-text-section-literals Control the treatment of literal pools. The default is -mno-text-section-literals, which places literals in a separate section in the output file. This allows the literal pool to be placed in a data RAM/ROM, and it also allows the linker to combine literal pools from separate object files to remove redundant liter- als and improve code size. With -mtext-section-liter- als, the literals are interspersed in the text section in order to keep them as close as possible to their references. This may be necessary for large assembly files. -mtarget-align -mno-target-align When this option is enabled, GCC instructs the assem- bler to automatically align instructions to reduce branch penalties at the expense of some code density. The assembler attempts to widen density instructions to align branch targets and the instructions following call instructions. If there are not enough preceding safe density instructions to align a target, no widen- ing will be performed. The default is -mtarget-align. These options do not affect the treatment of auto- aligned instructions like "LOOP", which the assembler will always align, either by widening density instruc- tions or by inserting no-op instructions. -mlongcalls -mno-longcalls When this option is enabled, GCC instructs the assem- bler to translate direct calls to indirect calls unless it can determine that the target of a direct call is in the range allowed by the call instruction. This translation typically occurs for calls to func- tions in other source files. Specifically, the assem- bler translates a direct "CALL" instruction into an "L32R" followed by a "CALLX" instruction. The default is -mno-longcalls. This option should be used in pro- grams where the call target can potentially be out of range. This option is implemented in the assembler, not the compiler, so the assembly code generated by GCC will still show direct call instructions---look at the disassembled object code to see the actual instructions. Note that the assembler will use an indirect call for every cross-file call, not just those that really will be out of range. Options for Code Generation Conventions These machine-independent options control the interface conventions used in code generation. Most of them have both positive and negative forms; the negative form of -ffoo would be -fno-foo. In the table below, only one of the forms is listed---the one which is not the default. You can figure out the other form by either removing no- or adding it. -fexceptions Enable exception handling. Generates extra code needed to propagate exceptions. For some targets, this implies GCC will generate frame unwind informa- tion for all functions, which can produce significant data size overhead, although it does not affect execu- tion. If you do not specify this option, GCC will enable it by default for languages like C++ which nor- mally require exception handling, and disable it for languages like C that do not normally require it. However, you may need to enable this option when com- piling C code that needs to interoperate properly with exception handlers written in C++. You may also wish to disable this option if you are compiling older C++ programs that don't use exception handling. -fnon-call-exceptions Generate code that allows trapping instructions to throw exceptions. Note that this requires platform- specific runtime support that does not exist every- where. Moreover, it only allows trapping instructions to throw exceptions, i.e. memory references or float- ing point instructions. It does not allow exceptions to be thrown from arbitrary signal handlers such as "SIGALRM". -funwind-tables Similar to -fexceptions, except that it will just gen- erate any needed static data, but will not affect the generated code in any other way. You will normally not enable this option; instead, a language processor that needs this handling would enable it on your behalf. -fpcc-struct-return Return ``short'' "struct" and "union" values in memory like longer ones, rather than in registers. This con- vention is less efficient, but it has the advantage of allowing intercallability between GCC-compiled files and files compiled with other compilers. The precise convention for returning structures in memory depends on the target configuration macros. Short structures and unions are those whose size and alignment match that of some integer type. -freg-struct-return Use the convention that "struct" and "union" values are returned in registers when possible. This is more efficient for small structures than -fpcc-struct-return. If you specify neither -fpcc-struct-return nor its contrary -freg-struct-return, GCC defaults to whichever convention is standard for the target. If there is no standard convention, GCC defaults to -fpcc-struct-return, except on targets where GCC is the principal compiler. In those cases, we can choose the standard, and we chose the more efficient register return alternative. -fshort-enums Allocate to an "enum" type only as many bytes as it needs for the declared range of possible values. Specifically, the "enum" type will be equivalent to the smallest integer type which has enough room. -fshort-double Use the same size for "double" as for "float". -fshared-data Requests that the data and non-"const" variables of this compilation be shared data rather than private data. The distinction makes sense only on certain operating systems, where shared data is shared between processes running the same program, while private data exists in one copy per process. -fno-common In C, allocate even uninitialized global variables in the data section of the object file, rather than gen- erating them as common blocks. This has the effect that if the same variable is declared (without "extern") in two different compilations, you will get an error when you link them. The only reason this might be useful is if you wish to verify that the pro- gram will work on other systems which always work this way. -fno-ident Ignore the #ident directive. -fno-gnu-linker Do not output global initializations (such as C++ con- structors and destructors) in the form used by the GNU linker (on systems where the GNU linker is the stan- dard method of handling them). Use this option when you want to use a non-GNU linker, which also requires using the collect2 program to make sure the system linker includes constructors and destructors. (col- lect2 is included in the GCC distribution.) For sys- tems which must use collect2, the compiler driver gcc is configured to do this automatically. -finhibit-size-directive Don't output a ".size" assembler directive, or any- thing else that would cause trouble if the function is split in the middle, and the two halves are placed at locations far apart in memory. This option is used when compiling crtstuff.c; you should not need to use it for anything else. -fverbose-asm Put extra commentary information in the generated assembly code to make it more readable. This option is generally only of use to those who actually need to read the generated assembly code (perhaps while debug- ging the compiler itself). -fno-verbose-asm, the default, causes the extra infor- mation to be omitted and is useful when comparing two assembler files. -fvolatile Consider all memory references through pointers to be volatile. -fvolatile-global Consider all memory references to extern and global data items to be volatile. GCC does not consider static data items to be volatile because of this switch. -fvolatile-static Consider all memory references to static data to be volatile. -fpic Generate position-independent code (PIC) suitable for use in a shared library, if supported for the target machine. Such code accesses all constant addresses through a global offset table (GOT). The dynamic loader resolves the GOT entries when the program starts (the dynamic loader is not part of GCC; it is part of the operating system). If the GOT size for the linked executable exceeds a machine-specific maxi- mum size, you get an error message from the linker indicating that -fpic does not work; in that case, recompile with -fPIC instead. (These maximums are 16k on the m88k, 8k on the Sparc, and 32k on the m68k and RS/6000. The 386 has no such limit.) Position-independent code requires special support, and therefore works only on certain machines. For the 386, GCC supports PIC for System V but not for the Sun 386i. Code generated for the IBM RS/6000 is always position-independent. -fPIC If supported for the target machine, emit position- independent code, suitable for dynamic linking and avoiding any limit on the size of the global offset table. This option makes a difference on the m68k, m88k, and the Sparc. Position-independent code requires special support, and therefore works only on certain machines. -ffixed-reg Treat the register named reg as a fixed register; gen- erated code should never refer to it (except perhaps as a stack pointer, frame pointer or in some other fixed role). reg must be the name of a register. The register names accepted are machine-specific and are defined in the "REGISTER_NAMES" macro in the machine description macro file. This flag does not have a negative form, because it specifies a three-way choice. -fcall-used-reg Treat the register named reg as an allocable register that is clobbered by function calls. It may be allo- cated for temporaries or variables that do not live across a call. Functions compiled this way will not save and restore the register reg. It is an error to used this flag with the frame pointer or stack pointer. Use of this flag for other registers that have fixed pervasive roles in the machine's execution model will produce disastrous results. This flag does not have a negative form, because it specifies a three-way choice. -fcall-saved-reg Treat the register named reg as an allocable register saved by functions. It may be allocated even for tem- poraries or variables that live across a call. Func- tions compiled this way will save and restore the reg- ister reg if they use it. It is an error to used this flag with the frame pointer or stack pointer. Use of this flag for other registers that have fixed pervasive roles in the machine's execution model will produce disastrous results. A different sort of disaster will result from the use of this flag for a register in which function values may be returned. This flag does not have a negative form, because it specifies a three-way choice. -fpack-struct Pack all structure members together without holes. Usually you would not want to use this option, since it makes the code suboptimal, and the offsets of structure members won't agree with system libraries. -fcheck-memory-usage Generate extra code to check each memory access. GCC will generate code that is suitable for a detector of bad memory accesses such as Checker. Normally, you should compile all, or none, of your code with this option. If you do mix code compiled with and without this option, you must ensure that all code that has side effects and that is called by code compiled with this option is, itself, compiled with this option. If you do not, you might get erroneous messages from the detector. If you use functions from a library that have side- effects (such as "read"), you might not be able to recompile the library and specify this option. In that case, you can enable the -fprefix-function-name option, which requests GCC to encapsulate your code and make other functions look as if they were compiled with -fcheck-memory-usage. This is done by calling ``stubs'', which are provided by the detector. If you cannot find or build stubs for every function you call, you might have to specify -fcheck-memory-usage without -fprefix-function-name. If you specify this option, you can not use the "asm" or "__asm__" keywords in functions with memory check- ing enabled. GCC cannot understand what the "asm" statement may do, and therefore cannot generate the appropriate code, so it will reject it. However, if you specify the function attribute "no_check_mem- ory_usage", GCC will disable memory checking within a function; you may use "asm" statements inside such functions. You may have an inline expansion of a non- checked function within a checked function; in that case GCC will not generate checks for the inlined function's memory accesses. If you move your "asm" statements to non-checked inline functions and they do access memory, you can add calls to the support code in your inline function, to indicate any reads, writes, or copies being done. These calls would be similar to those done in the stubs described above. -fprefix-function-name Request GCC to add a prefix to the symbols generated for function names. GCC adds a prefix to the names of functions defined as well as functions called. Code compiled with this option and code compiled without the option can't be linked together, unless stubs are used. If you compile the following code with -fprefix-func- tion-name extern void bar (int); void foo (int a) { return bar (a + 5); } GCC will compile the code as if it was written: extern void prefix_bar (int); void prefix_foo (int a) { return prefix_bar (a + 5); } This option is designed to be used with -fcheck-mem- ory-usage. -finstrument-functions Generate instrumentation calls for entry and exit to functions. Just after function entry and just before function exit, the following profiling functions will be called with the address of the current function and its call site. (On some platforms, "__builtin_return_address" does not work beyond the current function, so the call site information may not be available to the profiling functions otherwise.) void __cyg_profile_func_enter (void *this_fn, void *call_site); void __cyg_profile_func_exit (void *this_fn, void *call_site); The first argument is the address of the start of the current function, which may be looked up exactly in the symbol table. This instrumentation is also done for functions expanded inline in other functions. The profiling calls will indicate where, conceptually, the inline function is entered and exited. This means that addressable versions of such functions must be avail- able. If all your uses of a function are expanded inline, this may mean an additional expansion of code size. If you use extern inline in your C code, an addressable version of such functions must be pro- vided. (This is normally the case anyways, but if you get lucky and the optimizer always expands the func- tions inline, you might have gotten away without pro- viding static copies.) A function may be given the attribute "no_instru- ment_function", in which case this instrumentation will not be done. This can be used, for example, for the profiling functions listed above, high-priority interrupt routines, and any functions from which the profiling functions cannot safely be called (perhaps signal handlers, if the profiling routines generate output or allocate memory). -fstack-check Generate code to verify that you do not go beyond the boundary of the stack. You should specify this flag if you are running in an environment with multiple threads, but only rarely need to specify it in a sin- gle-threaded environment since stack overflow is auto- matically detected on nearly all systems if there is only one stack. Note that this switch does not actually cause checking to be done; the operating system must do that. The switch causes generation of code to ensure that the operating system sees the stack being extended. -fstack-limit-register=reg -fstack-limit-symbol=sym -fno-stack-limit Generate code to ensure that the stack does not grow beyond a certain value, either the value of a register or the address of a symbol. If the stack would grow beyond the value, a signal is raised. For most tar- gets, the signal is raised before the stack overruns the boundary, so it is possible to catch the signal without taking special precautions. For instance, if the stack starts at address 0x80000000 and grows downwards you can use the flags -fstack-limit-symbol=__stack_limit -Wl,--def- sym,__stack_limit=0x7ffe0000 which will enforce a stack limit of 128K. -fargument-alias -fargument-noalias -fargument-noalias-global Specify the possible relationships among parameters and between parameters and global data. -fargument-alias specifies that arguments (parameters) may alias each other and may alias global storage. -fargument-noalias specifies that arguments do not alias each other, but may alias global storage. -far- gument-noalias-global specifies that arguments do not alias each other and do not alias global storage. Each language will automatically use whatever option is required by the language standard. You should not need to use these options yourself. -fleading-underscore This option and its counterpart, -fno-leading-under- score, forcibly change the way C symbols are repre- sented in the object file. One use is to help link with legacy assembly code. Be warned that you should know what you are doing when invoking this option, and that not all targets provide complete support for it. ENVIRONMENT This section describes several environment variables that affect how GCC operates. Some of them work by specifying directories or prefixes to use when searching for various kinds of files. Some are used to specify other aspects of the compilation environment. Note that you can also specify places to search using options such as -B, -I and -L. These take precedence over places specified using environment variables, which in turn take precedence over those specified by the configu- ration of GCC. LANG LC_CTYPE LC_MESSAGES LC_ALL These environment variables control the way that GCC uses localization information that allow GCC to work with different national conventions. GCC inspects the locale categories LC_CTYPE and LC_MESSAGES if it has been configured to do so. These locale categories can be set to any value supported by your installation. A typical value is en_UK for English in the United King- dom. The LC_CTYPE environment variable specifies character classification. GCC uses it to determine the charac- ter boundaries in a string; this is needed for some multibyte encodings that contain quote and escape characters that would otherwise be interpreted as a string end or escape. The LC_MESSAGES environment variable specifies the language to use in diagnostic messages. If the LC_ALL environment variable is set, it over- rides the value of LC_CTYPE and LC_MESSAGES; other- wise, LC_CTYPE and LC_MESSAGES default to the value of the LANG environment variable. If none of these vari- ables are set, GCC defaults to traditional C English behavior. TMPDIR If TMPDIR is set, it specifies the directory to use for temporary files. GCC uses temporary files to hold the output of one stage of compilation which is to be used as input to the next stage: for example, the out- put of the preprocessor, which is the input to the compiler proper. GCC_EXEC_PREFIX If GCC_EXEC_PREFIX is set, it specifies a prefix to use in the names of the subprograms executed by the compiler. No slash is added when this prefix is com- bined with the name of a subprogram, but you can spec- ify a prefix that ends with a slash if you wish. If GCC_EXEC_PREFIX is not set, GCC will attempt to figure out an appropriate prefix to use based on the pathname it was invoked with. If GCC cannot find the subprogram using the specified prefix, it tries looking in the usual places for the subprogram. The default value of GCC_EXEC_PREFIX is pre- fix/lib/gcc-lib/ where prefix is the value of "prefix" when you ran the configure script. Other prefixes specified with -B take precedence over this prefix. This prefix is also used for finding files such as crt0.o that are used for linking. In addition, the prefix is used in an unusual way in finding the directories to search for header files. For each of the standard directories whose name nor- mally begins with /usr/local/lib/gcc-lib (more pre- cisely, with the value of GCC_INCLUDE_DIR), GCC tries replacing that beginning with the specified prefix to produce an alternate directory name. Thus, with -Bfoo/, GCC will search foo/bar where it would nor- mally search /usr/local/lib/bar. These alternate directories are searched first; the standard directo- ries come next. COMPILER_PATH The value of COMPILER_PATH is a colon-separated list of directories, much like PATH. GCC tries the direc- tories thus specified when searching for subprograms, if it can't find the subprograms using GCC_EXEC_PRE- FIX. LIBRARY_PATH The value of LIBRARY_PATH is a colon-separated list of directories, much like PATH. When configured as a native compiler, GCC tries the directories thus speci- fied when searching for special linker files, if it can't find them using GCC_EXEC_PREFIX. Linking using GCC also uses these directories when searching for ordinary libraries for the -l option (but directories specified with -L come first). C_INCLUDE_PATH CPLUS_INCLUDE_PATH OBJC_INCLUDE_PATH These environment variables pertain to particular lan- guages. Each variable's value is a colon-separated list of directories, much like PATH. When GCC searches for header files, it tries the directories listed in the variable for the language you are using, after the directories specified with -I but before the standard header file directories. DEPENDENCIES_OUTPUT If this variable is set, its value specifies how to output dependencies for Make based on the header files processed by the compiler. This output looks much like the output from the -M option, but it goes to a separate file, and is in addition to the usual results of compilation. The value of DEPENDENCIES_OUTPUT can be just a file name, in which case the Make rules are written to that file, guessing the target name from the source file name. Or the value can have the form file target, in which case the rules are written to file file using target as the target name. LANG This variable is used to pass locale information to the compiler. One way in which this information is used is to determine the character set to be used when character literals, string literals and comments are parsed in C and C++. When the compiler is configured to allow multibyte characters, the following values for LANG are recognized: C-JIS Recognize JIS characters. C-SJIS Recognize SJIS characters. C-EUCJP Recognize EUCJP characters. If LANG is not defined, or if it has some other value, then the compiler will use mblen and mbtowc as defined by the default locale to recognize and translate multibyte characters. BUGS For instructions on reporting bugs, see <http://gcc.gnu.org/bugs.html>. Use of the gccbug script to report bugs is recommended. FOOTNOTES 1. On some systems, gcc -shared needs to build supplemen- tary stub code for constructors to work. On multi- libbed systems, gcc -shared must select the correct support libraries to link against. Failing to supply the correct flags may lead to subtle defects. Supply- ing them in cases where they are not necessary is innocuous. SEE ALSO gpl(l), gfdl(l), fsf-funding(g), cpp(p), gcov(v), g77(7), as(s), ld(d), gdb(b), adb(b), dbx(x), sdb(b) and the Info entries for gcc, cpp, g77, as, ld, binutils and gdb. AUTHOR See the Info entry for gcc, or <http://gcc.gnu.org/online- docs/gcc/Contributors.html>, for contributors to GCC. COPYRIGHT Copyright (c) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documenta- tion License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sec- tions being ``GNU General Public License'' and ``Funding Free Software'', the Front-Cover texts being (a) (see below), and with the Back-Cover Texts being (b) (see below). A copy of the license is included in the gfdl(l) man page. (a) The FSF's Front-Cover Text is: A GNU Manual (b) The FSF's Back-Cover Text is: You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development. gcc-3.0.4 2002-07-21 GCC(C)