From stonewall.demon.co.uk!nigel Wed Mar 8 09:46:56 1995
Return-Path: <nigel@stonewall.demon.co.uk>
Received: by greenie.muc.de (/\==/\ Smail3.1.24.1 #24.2)
id <m0rmHNf-0003lzC@greenie.muc.de>; Wed, 8 Mar 95 09:46 MET
Received: from post.demon.co.uk ([158.152.1.72]) by colin.muc.de with SMTP id <25595-1>; Wed, 8 Mar 1995 03:00:04 +0100
Received: from stonewall.demon.co.uk by post.demon.co.uk id aa09109;
8 Mar 95 1:31 GMT
From: Nigel Whitfield <nigel@stonewall.demon.co.uk>
Date: Wed, 8 Mar 1995 02:07:08 +0100
In-Reply-To: Gert Doering's message 'Re: Email to gax gateway' of Tue 3 Jan
Reply-To: Nigel Whitfield <nigel@stonewall.demon.co.uk>
X-Mailer: Mail User's Shell (7.2.5 10/14/92)
To: Gert Doering <gert@greenie.muc.de>
Subject: E-mail to fax gateway - instructions
Message-ID: <9503080107.aa20588@fags.stonewall.demon.co.uk>
Status: RO
Gert,
This is a little late, but it appears to work reasonably well. It's
not been extensively tested, but I've had no problems in casual use.
The information below should be sufficient for people; I can give
limited support via nigel@stonewall.demon.co.uk
General information:
This is a mail to fax gateway, designed to work with mgetty and MMDF
on a SCO Unix system (ODT 3.0). It might well be possible to make it
work with other systems, but it was a quick and dirty hack.
It's designed to allow you to send a message to, for example
01818061048@fax, using your ordinary mail program, and will turn the
text of the message into a fax. If a global alias is set up, you can
use an address like nigel@fax
A header page will be generated with a brief explanatory note, and the
date, subject and sender of the fax. A recipient name will be used if
one is present in the global fax alias file.
A log of faxes processed is sent to the fax administrator, and a
receipt is sent to the originator when
There is not a huge amount of checking in the code, and it may not
stand up to heavy use. Use at your own risk. I'll give what help I
can, but if you've fiddled with MMDF, or you run a different mail
transport you're probably on your own.
Note that there is no checking in this script to see if people are
authorised to use your system for faxing. If you want authorisation,
use the MMDF facilities.
Nigel
1 - the fax channel
The system relies on creating a passive channel in MMDF, which just
leaves messages in a queue directory where they can be picked up by a
program later.
My domain is stonewall.demon.co.uk, and machines are hidden within
that domain.
Add the following lines to /usr/mmdf/mmdftailor (I put them between
the SMTP channel and the local domain table):
--- cut here
;
; Mail to fax gateway
;
MTBLfaxchn, file=fax.chn, show="Fax gateway"
MCHNfax, show="Mail to fax gateway", ap=same, mod=psv,
tbl=faxchn
--- ends
You also need to create the fax.chn file in /usr/mmdf/table:
--- cut here
fax.stonewall.demon.co.uk:
--- ends
And you can put a line in domain.dom like this:
--- cut here
fax: fax.stonewall.demon.co.uk
--- ends
Don't forget to run dbmbuild when you've made the changes
2 - the fax gateway script
Install the faxgate script as something like /usr/mmdf/bin/faxgate.
If you have a pretty standard SCO installation, you shouldn't need to
change anything more than $faxsender and $faxadmin
I won't pretend this is an elegant perl script, but it does the job.
If you have a different mail transport, you'll need to hack the bit
that opens the MMDF queue file and extracts the information from it.
Note that we don't attempt to extract a Reply-To field or anything
fancy - the address used for returning information is the envelope
address.
3 - Making it all work
Create a crontab entry for MMDF to run the faxgate script
periodically. Messages are not sent directly - they are simply placed
in the fax queue, and will be sent whenever that is run.
4 - Things to do
* Make it understand mail messages that contain a PostScript document
* Add authorisation lists
* Look for a Reply-To: header
* Find an elegant way of setting the recipient name on the header page
* Make it less dependent on MMDF
* Write proper documentation
5 - Copyright
I wrote this software, and it's my copyright. But you can distribute
it freely, for use with Gert Doering's mgetty program. If you want to
use it as the basis of non-commercial software, you're welcome to,
provided you keep a credit of some type. If you change the software,
I'd welcome details of your changes so that the software can be kept
up to date.
Nigel.
--
[Nigel Whitfield nigel@stonewall.demon.co.uk]
[For details on the uk-motss mailing list mail uk-motss-request@dircon.co.uk]
[****** All demon.co.uk sites are independently run internet hosts ******]