sane-snapscan(n) sane-snapscan(n) NAME sane-snapscan - SANE backend for AGFA SnapScan flatbed scanners DESCRIPTION The sane-snapscan library implements a SANE (Scanner Access Now Easy) backend that provides access to AGFA SnapScan flatbed scanners. At present, the following scan- ners are supported from this backend: AGFA SnapScan 300, 310, 600, and 1236s, 1236u, 1212u, e20, e25, e40, e50, e60, Vuego 310s, Acer 300f, 310s, 610s, 610plus, Prisa 620s, Prisa 620u, Prisa 620ut, Prisa 640u, Prisa 640bu, Prisa 1240, Prisa 3300, Prisa 4300, Prisa 5300 and Guille- mot Maxi Scan A4 Deluxe (SCSI) (with varying success). DEVICE NAMES This backend expects device names of the form: special Where special is the path-name for the special device that corresponds to a SCSI scanner. For SCSI scanners, the spe- cial device name must be a generic SCSI device or a sym- link to such a device. Under Linux, such a device name could be /dev/sga or /dev/sge, for example. See sane- scsi(i) for details. For USB scanners the devicename must contain the keyword "usb", as in /dev/usbscanner or /dev/usb/scanner0. For scanners that need a firmware upload before scanning add a line starting with "firmware" followed by the fully quali- fied path to your firmware file, e.g. firmware /path/to/my/firmware.bin For further details read http://snapscan.sourceforge.net. CONFIGURATION The contents of the snapscan.conf file is a list of device names that correspond to SnapScan scanners. Empty lines and lines starting with a hash mark (#) are ignored. See sane-scsi(i) on details of what constitutes a valid device name. FILES /etc/sane.d/snapscan.conf The backend configuration file (see also descrip- tion of SANE_CONFIG_DIR below). /usr/lib/sane/libsane-snapscan.a The static library implementing this backend. /usr/lib/sane/libsane-snapscan.so The shared library implementing this backend (pre- sent on systems that support dynamic loading). ENVIRONMENT SANE_CONFIG_DIR This environment variable specifies the list of directories that may contain the configuration file. Under UNIX, the directories are separated by a colon (`:'), under OS/2, they are separated by a semi-colon (`;'). If this variable is not set, the configuration file is searched in two default directories: first, the current working directory (".") and then in /etc/sane.d. If the value of the environment variable ends with the directory sepa- rator character, then the default directories are searched after the explicitly specified directo- ries. For example, setting SANE_CONFIG_DIR to "/tmp/config:" would result in directories "tmp/config", ".", and "/etc/sane.d" being searched (in this order). SANE_DEBUG_SNAPSCAN If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 255 requests all debug output to be printed. Smaller levels reduce verbosity. BUGS Man page doesn't provide much information yet. SEE ALSO sane(e), sane-scsi(i) http://www.cs.ualberta.ca/~charter/SnapScan/snapscan.html http://sourceforge.net/projects/snapscan/ (new development website) AUTHOR Kevin Charter, Franck Schneider, Michel Roelofs, Emmanuel Blot, Mikko Tyolajarvi, David Mosberger-Tang, Wolfgang Goeller, Petter Reinholdtsen, Gary Plewa, Sebastien Sable, Oliver Schwartz and Mikael Magnusson. Man page by Henning Meier-Geinitz (mostly based on the web pages and source code). 26 May 2001 sane-snapscan(n)