The groff mm macros are intended to be compatible with the DWB mm macros with the following limitations:
no Bell Labs localisms implemented.
the macros OK and PM is not implemented.
groff mm does not support cut marks
mm is intended to be international. Therefore it is possible to write short national macrofiles which change all english text to the preferred language. Use mmse as an example.
A file called locale or lang_locale is read after the initiation of the global variables. It is therefore possible to localize the macros with companyname and so on.
In this manual square brackets is used to show optional arguments.
Number registers and strings Many macros can be controlled by number registers and strings. A number register is assigned with the nr command: .nr XXX [+-?n [i? XXX is the name of the register, n is the value to be assigned, and i is increment value for auto-increment. n can have a plus or minus sign as prefix if an increment or decrement of the current value is wanted. (Auto-increment or decrement occurs if the number register is used with a plus or minus sign, n+[XXX? or n-[XXX?.)
Strings is defined with ds. .ds YYY string The string is assigned everything to the end of the line, even blanks. Initial blanks in string should be prefixed with a double-quote. (Strings are used in the text as *[YYY?.)
Special formatting of number registers A number register is printed with normal digits if no format has been given. Set the format with af: .af R c R is the name of the register, c is the format.
0, 1, 2, 3, ... 001
000, 001, 002, 003, ... i
0, i, ii, iii, iv, ... I
0, I, II, III, IV, ... a
0, a, b, c, ..., z, aa, ab, ... A
0, A, B, C, ..., Z, AA, AB, ...
)E level text
Adds text (heading-text) to the table of contents with level either 0 or between 1-7. See also .H. This macro is used for customized table of contents.
Begin one column processing. An 1 as argument disables the page-break. Use wide footnotes, small footnotes may be overprinted.
Begin two column processing. Splits the page in two columns. It is a special case of MC. See also 1C.
Abstract end, see AS.
AF [name of firm?
Authors firm, should be called before AU, see also COVER.
AL [type [[text-indent [[1?]]
Start autoincrement list. Items are numbered beginning on one. The type argument controls the type of numbers.
Arabic (the default) A
Upper-case letters (A-Z) a
Lower-case letters (a-z) I
Upper-case roman i
Lower-case roman Text-indent sets the indent and overrides Li. A third argument will prohibit printing of a blank line before each item.
APP name text
Begin an appendix with name name. Automatic naming occurs if name is A if auto is used. An new page is ejected, and a header is also produced if the number variable Aph__ is non-zero. This is the default. The appendix always appear in the 'List of contents' with correct pagenumber. The name APPENDIX'' can be changed by setting the string App to the desired text. The string Apptxt contains the current appendix text.
APPSK name pages text
Same as .APP, but the pagenr is incremented with pages. This is used when diagrams or other non-formatted documents are included as appendixes.
AS [arg [[indent?]
Abstract start. Indent is specified in 'ens', but scaling is allowed. Argument arg controls where the abstract is printed.
Abstract will be printed on page 1 and on the cover sheet if used in the released-paper style (MT 4), otherwise it will be printed on page 1 without a cover sheet. 1
Abstract will only be printed on the cover sheet (MT 4 only). 2
Abstract will be printed only on the cover sheet (other than MT 4 only). The cover sheet is printed without need for CS. Abstract is not printed at all in external letters (MT 5). The indent controls the indentation of both margins, otherwise will normal text indent be used.
Abstract title. Default is ABSTRACT. Sets the text above the abstract text.
AT title1 [title2 ...?
Authors title. AT must appear just after each AU. The title will show up after the name in the signature block.
Author information, specifies the author of the memo or paper, and will be printed on the cover sheet and on other similar places. AU must not appear before TL. The author information can contain initials, location, department, telephone extension, room number or name and up to three extra arguments.
AV [name [[1?]
Approval signature, generates an approval line with place for signature and date. The string APPROVED: can be changed with variable Letapp, and the string Date in Letdate.
Letter signature, generates a line with place for signature.
B [bold-text [[prev-font-text [[bold...?]]
Begin boldface. No limit on the number of arguments. All arguments will be concatenated to one word, the first, third and so on will be printed in boldface.
Begin box (as the ms macro). Draws a box around the text. The text will be indented one character, and the right margin will be one character shorter.
End box. Finish the box started by B1.
End bottom block, see BS.
Bold-italic. No limit on the number of arguments, see B.
BL [text-indent [[1?]
Start bullet list, initialize a list with a bullet and a space in the beginning of each list item (see LI). Text-indent overrides the default indentation of the list items set by number register Pi. A third argument will prohibit printing of a blank line before each item.
Bold-roman. No limit on the number of arguments.
Bottom block start. Begins the definition of a text block which is printed at the bottom of each page. Block ends with BE.
BVL text-indent [mark-indent [[1?]
Start of broken variable-item list. Broken variable-item list has no fixed mark, it assumes that every LI has a mark instead. The text will always begin at the next line after the mark. Text-indent sets the indent to the text, and mark-indent the distance from the current indent to the mark. A third argument will prohibit printing of a blank line before each item.
COVER begins a coversheet definition. It is important that .COVER appears before any normal text. .COVER uses arg to build the filename /usr/share/groff/1.17.2/tmac/mm/arg.cov. Therefore it is possible to create unlimited types of coversheets. ms.cov is supposed to look like the ms coversheet. .COVER requires a .COVEND at the end of the coverdefinition. Always use this order of the covermacros:
.COVER .TL .AF .AU .AT .AS .AE .COVEND However, only .TL and .AU are required.
This finish the cover description and prints the cover-page. It is defined in the cover file.
Display end. Ends a block of text, display, that begins with DS or DF.
DF [format [[fill [[rindent?]]
Begin floating display (no nesting allowed). A floating display is saved in a queue and is printed in the order entered. Format, fill and rindent is the same as in DS. Floating displays are controlled by the two number registers De and Df.
Nothing special, this is the default. 1
A page eject will occur after each printed display, giving only one display per page and no text following it.
Displays are printed at the end of each section (when section-page numbering is active) or at the end of the document. 1
A new display will be printed on the current page if there is enough space, otherwise it will be printed at the end of the document. 2
One display will be printed at the top of each page or column (in multi-column mode). 3
Print one display if there is enough space for it, otherwise it will be printed at the top of the next page or column. 4
Print as many displays that will fit in a new page or column. A page break will occur between each display if De is not zero. 5
Fill the current page with displays and the rest beginning at a new page or column. (This is the default.) A page break will occur between each display if De is not zero.
DL [text-indent [[1 [[1?]]
Dash list start. Begins a list where each item is printed after a dash. Text-indent changes the default indentation of the list items set by number register Pi. A second argument prevents the empty line between each list item to be printed. See LI. A third argument will prohibit printing of a blank line before each item.
DS [format [[fill [[rindent?]]
Static display start. Begins collection of text until DE. The text is printed together on the same page, unless it is longer than the height of the page. DS can be nested to a unlimited depth (reasonably :-).
No indentation. none
No indentation. L
No indentation. I
Indent text with the value of number register Si. C
Center each line CB
Center the whole display as a block. R
Right adjust the lines. RB
Right adjust the whole display as a block
L, I, C and CB can also be specified as 0, 1, 2 or 3 for compatibility reasons. (Don't use it. :-)
Line-filling turned off. none
Line-filling turned off. N
Line-filling turned off. F
Line-filling turned on.
N and F can also be specified as 0 or 1. An empty line will normally be printed before and after the display. Setting number register Ds to 0 will prevent this. Rindent shortens the line length by that amount.
EC [title [[override [[flag [[refname?]]]
Equation title. Sets a title for an equation. The override argument change the numbering.
override is a prefix to the number. 0
override is a prefix to the number. 1
override is a suffix to the number. 2
override replaces the number. EC uses the number register Ec as counter. It is possible to use .af to change the format of the number. If number register Of is 1, then the format of title will use a dash instead of a dot after the number. The string Le controls the title of the List of Equations, default is LIST OF EQUATIONS. The List of Equations will only be printed if number register Le is 1, default 0. The string Liec contains the word Equation, wich is printed before the number. If refname is used, then the equation number is saved with .SETR, and can be retrieved with .GETST refname. Special handling of the title will occur if EC is used inside DS/DE, it will not be affected by the format of DS.
Even-page footer, printed just above the normal page footer on even pages, see PF.
Even-page header, printed just below the normal page header on even pages, see PH.
Equation end, see EQ.
End of page user-defined macro. This macro will be called instead of the normal printing of the footer. The macro will be executed in a separate environment, without any trap active. See TP.
Strings available to EOP
Argument from PF. EOPef
Argument from EF. EOPof
Argument from OF.
EPIC width height [name?
EPIC draws a box with the given width and height, it will also print the text name or a default string if name is not specified.. This is used to include external pictures, just give the size of the picture. See PIC
Equation start. EQ/EN are the delimiters for equations written for eqn. EQ/EN must be inside a DS/DE-pair, except when EQ is only used to set options in eqn. The label will appear at the right margin of the equation, unless number register Eq is 1. Then the label will appear at the left margin.
EX [title [[override [[flag [[refname?]]]
Exhibit title, arguments are the same as for EC. EX uses the number register Ex as counter. The string Lx controls the title of the List of Exhibits, default is LIST OF EXHIBITS. The List of Exhibits will only be printed if number register Lx is 1, default 1. The string Liex contains the word Exhibit, which is printed before the number. If refname is used, then the exhibit number is saved with .SETR, and can be retrieved with .GETST refname. Special handling of the title will occur if EX is used inside DS/DE, it will not be affected by the format of DS.
Prints Yours very truly, as a formal closing of a letter or memorandum. The argument replaces the defualt string. The default is stored in string variable Letfc.
FD [arg [[1?]
Footnote default format. Controls the hyphenation (hyphen), right margin justification (adjust), indentation of footnote text (indent). It can also change the label justification (ljust).
arg hyphen adjust indent ljust 0 no yes yes left 1 yes yes yes left 2 no no yes left 3 yes no yes left 4 no yes no left 5 yes yes no left 6 no no no left 7 yes no no left 8 no yes yes right 9 yes yes yes right 10 no no yes right 11 yes no yes right Argument greater than or equal to 11 is considered as arg 0. Default for mm is 10.
FG [title [[override [[flag [[refname?]]]
Figure title, arguments are the same as for EC. FG uses the number register Fg as counter. The string Lf controls the title of the List of Figures, default is LIST OF FIGURES. The List of Figures will only be printed if number register Lf is 1, default 1. The string Lifg contains the word Figure, wich is printed before the number. If refname is used, then the figure number is saved with .SETR, and can be retrieved with .GETST refname. Special handling of the title will occur if FG is used inside DS/DE, it will not be affected by the format of DS.
Footnote start. The footnote is ended by FE. Footnotes is normally automatically numbered, the number is available in string F. Just add *F in the text. By adding label, it is possible to have other number or names on the footnotes. Footnotes in displays is now possible. An empty line separates footnotes, the height of the line is controlled by number register Fs, default value is 1.
GETHN refname [varname?
Includes the headernumber where the corresponding SETR refname was placed. Will be X.X.X. in pass 1. See INITR. If varname is used, GETHN sets the stringvariable varname to the headernumber.
GETPN refname [varname?
Includes the pagenumber where the corresponding SETR refname was placed. Will be 9999 in pass 1. See INITR. If varname is used, GETPN sets the stringvariable varname to the pagenumber.
Combines GETHN and GETPN with the text 'chapter' and ', page'. The string Qrf contains the text for reference:
Qrf may be changed to support other languages. Strings Qrfh and Qrfp are set by GETR and contains the page and headernumber.
GETST refname [varname?
Includes the string saved with the second argument to .SETR. Will be dummystring in pass 1. If varname is used, GETST sets the stringvariable varname to the saved string. See INITR.
H level [heading-text [[heading-suffix?]
Numbered section heading. Section headers can have a level between 1 and 7, level 1 is the top level. The text is given in heading-text, and must be surrounded by double quotes if it contains spaces. Heading-suffix is added to the header in the text but not in the table of contents. This is normally used for footnote marks and similar things. Don't use *F in heading-suffix, it won't work. A manual label must be used, see FS.
An eventual paragraph, P, directly after H will be ignored, H is taking care of spacing and indentation.
Page ejection before heading Number register Ej controls page ejection before the heading. Normally, a level one heading gets two blank lines before it, higher levels gets only one. A new page is ejected before each first-level heading if number register Ej is 1. All levels below or equal the value of Ej gets a new page. Default value for Ej is 0.
Heading break level A line break occurs after the heading if the heading level is less or equal to number register Hb. Default value 2.
Heading space level A blank line is inserted after the heading if the heading level is less or equal to number register Hs. Default value 2.
Text will follow the heading on the same line if the level is greater than both Hb and Hs.
Post-heading indent Indentation of the text after the heading is controlled by number register Hi, default value 0.
The text will be left-justified. 1
Indentation of the text will follow the value of number register Pt, see P. 2
The text will be lined up with the first word of the heading.
Centered section headings All headings whose level is equal or below number register Hc and also less than or equal to Hb or Hs is centerered.
Font control of the heading The font of each heading level is controlled by string HF. It contains a fontnumber or fontname for each level. Default is 2 2 2 2 2 2 2 (all headings in italic). Could also be written as I I I I I I I. All omitted values are presumed to be a 1.
Point size control. String HP controls the pointsize of each heading, in the same way as HF controls the font. A value of 0 selects the default point size. Default value is 0 0 0 0 0 0 0. Beware that only the point size changes, not the vertical size. That can be controlled by the user specified macro HX and/or HZ.
Heading counters Seven number registers, named H1 thru H7 contains the counter for each heading level. The values are printed using arabic numerals, this can be changed with the macro HM (see below). All marks are concatenated before printing. To avoid this, set number register Ht to 1. That will only print the current heading counter at each heading.
Automatic table of contents All headings whose level is equal or below number register Cl is saved to be printed in the table of contents. Default value is 2.
Special control of the heading, user-defined macros. These macros can be defined by the user to get a finer control of vertical spacing, fonts or other features. Argument level is the level-argument to H, but 0 for unnumbered headings (see HU). Argument rlevel is the real level, it is set to number register Hu for unnumbered headings. Argument heading-text is the text argument to H and HU.
HX level rlevel heading-text HX is called just before the printing of the heading. The following register is available for HX. HX may alter }0, }2 and ;3.
Contains the heading mark plus two spaces if rlevel is non-zero, otherwise empty.
Contains the position of the text after the heading. 0 means that the text should follow the heading on the same line, 1 means that a line break should occur before the text and 2 means that a blank line should separate the heading and the text.
Contains two spaces if register ;0 is 0. It is used to separate the heading from the text. The string is empty if ;0 is non-zero.
Contains the needed space in units after the heading. Default is 2v.
Can be used to change things like numbering (}0), vertical spacing (}2) and the needed space after the heading.
HY dlevel rlevel heading-text HY is called after size and font calculations and might be used to change indentation.
HZ dlevel rlevel heading-text HZ is called after the printing of the heading, just before H or HU exits. Could be used to change the page header according to the section heading.
Set hyphenation character. Default value is %. Resets to the default if called without argument. Hyphenation can be turned off by setting number register Hy to 0 in the beginning of the file.
HM [arg1 [[arg2 [[... [[arg7?]]]
Heading mark style. Controls the type of marking for printing of the heading counters. Default is 1 for all levels.
Arabic numerals. 0001
Arabic numerals with leading zeroes, one or more. A
Upper-case alphabetic a
Lower-case alphabetic I
Upper-case roman numerals i
lower-case roman numerals empty
Unnumbered section header. HU behavies like H at the level in number register Hu. See H.
HX dlevel rlevel heading-text
Userdefined heading exit. Called just before printing the header. See H.
HY dlevel rlevel heading-text
Userdefined heading exit. Called just before printing the header. See H.
HZ dlevel rlevel heading-text
Userdefined heading exit. Called just after printing the header. See H.
Italic. Changes the font to italic if called without arguments. With one argument it will set the word in italic. With two argument it will concatenate them and set the first word in italic and the second in the previous font. There is no limit on the number of argument, all will be concatenated.
IA [addressee-name [[title?]
Begins specification of the addressee and addressee's address in letter style. Several names can be specified with empty IA/IE-pairs, but only one address. See LT.
Italic-bold. Even arguments is printed in italic, odd in boldface. See I.
Ends the address-specification after IA.
INITI type filename [macro?
Initialize the new index system, sets the filename to collect index lines in with IND. Argument type selects the type of index, page number, header marks or both. The default is N.
It is also possible to create a macro that is responsible for formatting each row. Add the name of the macro as argument 3. The macro will be called with the index as argument(s).
Page numbers H
Header marks B
Both page numbers and header marks, tab separated
Initialize the refencemacros. References will be written to filename.tmp and filename.qrf. Requires two passes with groff. The first looks for references and the second includes them. INITR can be used several times, but it is only the first occurrence of INITR that is active. Option -U might be needed if unsafe-errors occur. See also SETR, GETPN and GETHN.
IND arg1 [arg2 [[...?]
IND writes a line in the index file selected by INITI with all arguments and the page number or header mark separated by tabs.
Examples arg1tpage number arg1targ2tpage number arg1theader mark arg1tpage numbertheader mark
form the index, normally in two columns (can be changed by defining TYIND). The index is printed with string variable Index as header, default is INDEX. One-column processing is returned after the list. INDP will call the user-defined macros TXIND, TYIND and TZIND if defined. TXIND is called before printing INDEX, TYIND is called instead of printing INDEX. TZIND is called after the printing and should take care of restoring to normal operation again.
ISODATE changes the predefined date string in DT to ISO-format, ie YYYY-MM-DD. This can also be done by adding -rIso=1 on the command line. Reverts to old date format if argument is 0.
Italic-roman. Even arguments is printed in italic, odd in roman. See I.
LB text-indent mark-indent pad type [LB-space?]]
List begin macro. This is the common macro used for all lists. Text-indent is the number of spaces to indent the text from the current indent.
Pad and mark-indent controls where to put the mark. The mark is placed within the mark area, and mark-indent sets the number of spaces before this area. It is normally 0. The mark area ends where the text begins. The start of the text is still controlled by text-indent.
The mark is left justified whitin the mark area if pad is 0. If pad is greater than 0, then mark-indent is ignored, and the mark is placed pad spaces before the text. This will right justify the mark.
If type is 0 the list will have either a hanging indent or, if argument mark is given, the string mark as mark.
If type is greater than 0 automatic numbering will occur, arabic if mark is empty. Mark can then be any of 1, A, a, I or i.
Type selects one of six possible ways to display the mark. type
Every item in the list will get LI-space number of blank lines before them. Default is 1.
LB itself will print LB-space blank lines. Default is 0.
List-status clear. Terminates all current active lists down to list-level, or 0 if no argmuent is given. This is used by H to clear any active list.
List end. Terminate the current list. LE outputs a blank line if an argument is given.
LI [mark [[1?]
List item precedes every item in a list. Without argument LI will print the mark determined by the current list type. By giving LI one argument, it will use that as the mark instead. Two arguments to LI will make mark a prefix to the current mark. There will be no separating space between the prefix and the mark if the second argument is 2 instead of 1. This behaviour can also be achieved by setting number register Limsp to zero. A zero length mark will make a hanging indent instead.
A blank line is normally printed before the list item. This behaviour can be controlled by number register Ls. Pre-spacing will occur for each list-level less than or equal to Ls. Default value is 99. (Nesting of lists is unlimited. :-)
The indentation can be changed thru number register Li. Default is 6.
All lists begins with a list initialization macro, LB. There are, however, seven predefined listtypes to make lists easier to use. They all call LB with different default values.
Automatically Incremented List ML
Marked List VL
Variable-Item List BL
Bullet List DL
Dash List RL
Reference List BVL
Broken Varable List. These lists are described at other places in this manual. See also LB.
Formats a letter in one of four different styles depending on the argument. See also INTERNALS.
Blocked. Date line, return address, writer's address and closing begins at the center of the line. All other lines begin at the left margin. SB
Semi-blocked. Same as blocked, except that the first line in every paragraph is indented five spaces. FB
Full-blocked. All lines begin at the left margin. SP
Simplified. Almost the same as the full-blocked style. Subject and the writer's identification are printed in all-capital.
LO type [arg?
Specify options in letter (see .LT). This is a list of the standard options:
Confidential notation. Prints CONFIDENTIAL on the second line below the date line. Any argument replaces CONFIDENTIAL. See also string variable LetCN. RN
Reference notation. Prints In reference to: and the argument two lines below the date line. See also string variable LetRN. AT
Attention. Prints ATTENTION: and the argument below the inside address. See also string variable LetAT. SA
Salutation. Prints To Whom It May Concern: or the argument if it was present. The salutation is printed two lines below the inside address. See also string variable LetSA. SJ
Subject line. Prints the argument as subject prefixed with SUBJECT: two lines below the inside address, except in letter type SP. Then the subject is printed in all-captial without any prefix. See also string variable LetSJ.
MC column-size [column-separation?
Begin multiple columns. Return to normal with 1C. MC will create as many columns as the current line length permits. Column-size is the width of each column, and column-separation is the space between two columns. Default separation is the column-size/15. See also 1C.
ML mark [text-indent [[1?]
Marked list start. The mark argument will be printed before each list item. Text-indent sets the indent and overrides Li. A third argument will prohibit printing of a blank line before each item.
MT [arg [[addressee?]
Memorandum type. The arg is part of a filename in /usr/share/groff/1.17.2/tmac/mm/*.MT. Memorandum type 0 thru 5 are supported, including . Addressee just sets a variable, used in the AT '' arg__
Normal memorandum, no type printed 1
Memorandum with MEMORANDUM FOR FILE printed 2
Memorandum with PROGRAMMER'S NOTES printed 3
Memorandum with ENGINEER'S NOTES printed 4
Released paper style 5
External letter style See also COVER/COVEND, a more flexible type of front page.
MOVE y-pos [x-pos [[line-length?]
Move to a position, pageoffset set to x-pos. If line-length is not given, the difference between current and new pageoffset is used. Use PGFORM without arguments to return to normal.
MULB cw1 space1 [cw2 space2 [[cw3 ...?]
Begin a special multi-column mode. Every columns width must be specified. Also the space between the columns must be specified. The last column does not need any space-definition. MULB starts a diversion and MULE ends the diversion and prints the columns. The unit for width and space is 'n', but MULB accepts all normal unitspecifications like 'c' and 'i'. MULB operates in a separate environment.
Begin the next column. This is the only way to switch column.
End the multi-column mode and print the columns.
Print numbered paragraph with header level two. See .P.
Force printing to the next column, don't use this together with the MUL* macros, see 2C.
NS [arg [[1?]
Prints different types of notations. The argument selects between the predefined type of notations. If the second argument is available, then the argument becomes the entire notation. If the argument doesn't exist in the predefined, it will be printed as Copy (arg) to. It is possible to add more standard notations, see the string variable Letns and Letnsdef.
Arg Notation none Copy To ''
New date. Override the current date. Date is not printed if new-date is an empty string.
Odd-page footer, a line printed just above the normal footer. See EF and PF.
Odd-page header, a line printed just below the normal header. See EH and PH.
Make sure that the following text is printed at the top of an odd-numbered page. Will not output an empty page if currently at the top of an odd page.
Begin new paragraph. P without argument will produce left justified text, even the first line of the paragraph. This is the same as setting type to 0. If the argument is 1, then the first line of text following P will be indented by the number of spaces in number register Pi, normally 5.
Instead of giving 1 as argument to P it is possible to set the paragraph type in number register Pt. Using 0 and 1 will be the same as adding that value to P. A value of 2 will indent all paragraphs, except after headings, lists and displays.
The space between two paragraphs is controlled by number register Ps, and is 1 by default (one blank line).
Sets linelength, pagelength and/or pageoffset. This macro can be used for special formatting, like letterheads and other. It is normally the first command in a file, though it's not necessary. PGFORM can be used without arguments to reset everything after a MOVE. A line-break is done unless the fourth argument is given. This can be used to avoid the pagenumber on the first page while setting new width and length. (It seems as if this macro sometimes doesn't work too well. Use the command line arguments to change linelength, pagelength and pageoffset instead. Sorry.)
No header is printed on the next page. Used to get rid of the header in letters or other special texts. This macro must be used before any text to inhibit the pageheader on the first page.
PIC includes a Postscript file in the document. The macro depends on mmroff and INITR. -L, -C, -R and -I n adjusts the picture or indents it. The optionally width and height can also be given to resize the picture.
Picture end. Ends a picture for pic, see the manual for pic.
Page footer. PF sets the line to be printed at the bottom of each page. Normally empty. See PH for the argument specification.
Page header, a line printed at the top of each page. The argument should be specified as % is changed to the current page number. The default page-header is
Picture start (from pic). Begins a picture for pic, see the manual.
Page-header user-defined exit. PX is called just after the printing of the page header in no-space mode.
Roman. Return to roman font, see also I.
Roman-bold. Even arguments is printed in roman, odd in boldface. See I.
RD [prompt [[diversion [[string?]]
Read from standard input to diversion and/or string. The text will be saved in a diversion named diversion. Recall the text by writing the name of the diversion after a dot on an empty line. A string will also be defined if string is given. Diversion and/or prompt can be empty (''
Reference end. Ends a reference definition and returns to normal processing. See RS.
Even arguments are printed in roman, odd in italic. See I.
RL [text-indent [[1?]
Reference list start. Begins a list where each item is preceded with a automatically incremented number between square brackets. Text-indent changes the default indentation.
RP [arg1 [[arg2?]
Produce reference page. RP can be used if a reference page is wanted somewhere in the document. It is not needed if TC is used to produce a table of content. The reference page will then be printed automatically.
The reference counter will not be reset if arg1 is 1.
Arg2 tells RP whether to eject a page or not. Arg2
The reference page will be printed on a separate page. This is the default. 1
Do not eject page after the list. 2
Do not eject page before the list. 3
Do not eject page before and after the list. The reference items will be separated by a blank line. Setting number register Ls to 0 will suppress the line.
The string Rp contains the reference page title and is normally set to REFERENCES.
RS begins an automatically numbered reference definition. Put the string *(Rf where the reference mark should be and write the reference between RS/RF at next new line after the reference mark. The reference number is stored in number register :R. If string-name is given, a string with that name will be defined and contain the current reference mark. The string can be referenced as *[__''string-name''__? later in the text.
S [size [[spacing?]
Set point size and vertical spacing. If any argument is equal 'P', then the previous value is used. A 'C' means current value, and 'D' default value. If '+' or '-' is used before the value, then increment or decrement of the current value will be done.
Set right-margin justification. Justification is normally turned on. No argumenent or 0 turns off justification, a 1 turns on justification.
SETR refname [string?
Remember the current header and page-number as refname. Saves string if string is defined. string is retrieved with .GETST. See INITR.
SG [arg [[1?]
Signature line. Prints the authors name(s) after the formal closing. The argument will be appended to the reference data, printed at either the first or last author. The reference data is the location, department and initials specified with .AU. It will be printed at the first author if the second argument is given, otherwise at the last. No reference data will be printed if the author(s) is specifed thru .WA/.WE. See INTERNALS.
Skip pages. If pages is 0 or omitted, a skip to the next page will occur unless it is already at the top of a page. Otherwise it will skip pages pages.
SM string1 [string2 [[string3?]
Make a string smaller. If string2 is given, string1 will be smaller and string2 normal, concatenated with string1. With three argument, all is concatenated, but only string2 is made smaller.
Space vertically. lines can have any scalingfactor, like 3i or 8v. Several SP in a line will only produce the maximum number of lines, not the sum. SP will also be ignored until the first textline in a page. Add a before SP to avoid this.
reset tabs to every 5n. Normally used to reset any previous tabpositions.
TB [title [[override [[flag [[refname?]]]
Table title, arguments are the same as for EC. TB uses the number register Tb as counter. The string Lt controls the title of the List of Tables, default is LIST OF TABLES. The List of Tables will only be printed if number register Lt is 1, default 1. The string Litb contains the word TABLE, wich is printed before the number. Special handling of the title will occur if TB is used inside DS/DE, it will not be affected by the format of DS.
Table of contents. This macro is normally used at the last line of the document. It generates a table of contents with headings up to the level controlled by number register Cl. Note that Cl controls the saving of headings, it has nothing to do with TC. Headings with level less than or equal to slevel will get spacing number of lines before them. Headings with level less than or equal to tlevel will have their page numbers right justified with dots or spaces separating the text and the page number. Spaces is used if tab is greater than zero, otherwise dots. Other headings will have the page number directly at the end of the heading text (ragged right).
The rest of the arguments will be printed, centered, before the table of contents.
The user-defined macros TX and TY are used if TC is called with at most four arguments. TX is called before the printing of CONTENTS, and TY is called instead of printing CONTENTS.
Equivalent macros can be defined for list of figures, tables, equations and excibits by defining TXxx or TYxx, where xx is Fg, TB, EC or EX.
String Ci can be set to control the indentations for each heading-level. It must be scaled, like .ds Ci .25i .5i .75i 1i 1i. The indentation is normally controlled by the maxlength of headings in each level.
All texts can be redefined, new stringvariables Lifg, Litb, Liex, Liec and Licon contain ''
Table end. See TS.
Table header. See TS. TH ends the header of the table. This header will be printed again if a page-break occurs. Argument N isn't implemented yet.
TL lib/CachedMarkup.php (In template 'browse' < 'body' < 'html'):257: Error: Pure virtual lib/CachedMarkup.php (In template 'browse' < 'body' < 'html'):257: Error: Pure virtual
Fatal PhpWiki Error
lib/CachedMarkup.php (In template 'browse' < 'body' < 'html'):257: Error: Pure virtual
lib/CachedMarkup.php (In template 'browse' < 'body' < 'html'):257: Error: Pure virtual