tty prog [__args...__?
GDBSERVER is a program that allows you to run GDB on a different machine than the one which is running the program being debugged.
Usage (server (target) side):
First, you need to have a copy of the program you want to debug put onto the target system. The program can be stripped to save space if needed, as GDBserver doesn't care about symbols. All symbol handling is taken care of by the GDB running on the host system.
To use the server, you log on to the target system, and run the `gdbserver' program. You must tell it (a) how to communicate with GDB, (b) the name of your program, and (c) its arguments. The general syntax is:
For example, using a serial port, you might say:
This tells gdbserver to debug emacs with an argument of foo.txt, and to communicate with GDB via /dev/com1. Gdbserver now waits patiently for the host GDB to communicate with it.
To use a TCP connection, you could say:
This says pretty much the same thing as the last example, except that we are going to communicate with the host GDB via TCP. The `host:2345' argument means that we are expecting to see a TCP connection from `host' to local TCP port 2345. (Currently, the `host' part is ignored.) You can choose any number you want for the port number as long as it does not conflict with any existing TCP ports on the target system. This same port number must be used in the host GDBs `target remote' command, which will be described shortly. Note that if you chose a port number that conflicts with another service, gdbserver will print an error message and exit.
On some targets, gdbserver can also attach to running programs. This is accomplished via the --attach argument. The syntax is:
PID is the process ID of a currently running process. It isn't necessary to point gdbserver at a binary for the running process.
Usage (host side):
You need an unstripped copy of the target program on your host system, since GDB needs to examine it's symbol tables and such. Start up GDB as you normally would, with the target program as the first argument. (You may need to use the --baud option if the serial line is running at anything except 9600 baud.) Ie: `gdb TARGET-PROG', or `gdb --baud BAUD TARGET-PROG'. After that, the only new command you need to know about is `target remote'. It's argument is either a device name (usually a serial device, like `/dev/ttyb'), or a HOST:PORT descriptor. For example:
(gdb) target remote /dev/ttyb
communicates with the server via serial line /dev/ttyb, and:
(gdb) target remote the-target:2345
Copyright (c) 1993 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.