Home
Main website
Display Sidebar
Hide Ads
Recent Changes
View Source:
console_codes(4)
Edit
PageHistory
Diff
Info
LikePages
CONSOLE_CODES !!!CONSOLE_CODES NAME DESCRIPTION LINUX CONSOLE CONTROLS CHARACTER SETS MOUSE TRACKING COMPARISONS WITH OTHER TERMINALS BUGS SEE ALSO ---- !!NAME console_codes - Linux console escape and control sequences !!DESCRIPTION The Linux console implements a large subset of the VT102 and ECMA-48/ISO 6429/ANSI X3.64 terminal controls, plus certain private-mode sequences for changing the color palette, character-set mapping, etc. In the tabular descriptions below, the second column gives ECMA-48 or DEC mnemonics (the latter if prefixed with DEC) for the given function. Sequences without a mnemonic are neither ECMA-48 nor VT102. After all the normal output processing has been done, and a stream of characters arrives at the console driver for actual printing, the first thing that happens is a translation from the code used for processing to the code used for printing. If the console is in UTF-8 mode, then the incoming bytes are first assembled into 16-bit Unicode codes. Otherwise each byte is transformed according to the current mapping table (which translates it to a Unicode value). See the CHARACTER SETS section below for discussion. In the normal case, the Unicode value is converted to a font index, and this is stored in video memory, so that the corresponding glyph (as found in video ROM) appears on the screen. Note that the use of Unicode (and the design of the PC hardware) allows us to use 512 different glyphs simultaneously. If the current Unicode value is a control character, or we are currently processing an escape sequence, the value will treated specially. Instead of being turned into a font index and rendered as a glyph, it may trigger cursor movement or other control functions. See the LINUX CONSOLE CONTROLS section below for discussion. It is generally not good practice to hard-wire terminal controls into programs. Linux supports a terminfo(5) database of terminal capabilities. Rather than emitting console escape sequences by hand, you will almost always want to use a terminfo-aware screen library or utility such as ncurses(3), tput(1), or reset(1). !!LINUX CONSOLE CONTROLS This section describes all the control characters and escape sequences that invoke special functions (i.e. anything other than writing a glyph at the current cursor location) on the Linux console. __Control characters__ A character is a control character if (before transformation according to the mapping table) it has one of the 14 codes 00 (NUL), 07 (BEL), 08 (BS), 09 (HT), 0a (LF), 0b (VT), 0c (FF), 0d (CR), 0e (SO), 0f (SI), 18 (CAN), 1a (SUB), 1b (ESC), 7f (DEL). One can set a `display control characters' mode (see below), and allow 07, 09, 0b, 18, 1a, 7f to be displayed as glyphs. On the other hand, in UTF-8 mode all codes 00-1f are regarded as control characters, regardless of any `display control characters' mode. If we have a control character, it is acted upon immediately and then discarded (even in the middle of an escape sequence) and the escape sequence continues with the next character. (However, ESC starts a new escape sequence, possibly aborting a previous unfinished one, and CAN and SUB abort any escape sequence.) The recognized control characters are BEL, BS, HT, LF, VT, FF, CR, SO, SI, CAN, SUB, ESC, DEL, CSI. They do what one would expect: BEL (0x07, ^G) beeps; BS (0x08, ^H) backspaces one column (but not past the beginning of the line); HT (0x09, ^I) goes to the next tab stop or to the end of the line if there is no earlier tab stop; LF (0x0A, ^J), VT (0x0B, ^K) and FF (0x0C, ^L) all give a linefeed; CR (0x0D, ^M) gives a carriage return; SO (0x0E, ^N) activates the G1 character set, and if LF/NL (new line mode) is set also a carriage return; SI (0x0F, ^O) activates the G0 character set; CAN (0x18, ^X) and SUB (0x1A, ^Z) interrupt escape sequences; ESC (0x1B, ^[[) starts an escape sequence; DEL (0x7F) is ignored; CSI (0x9B) is equivalent to ESC [[. __ESC- but not CSI-sequences__ __ECMA-48 CSI sequences__ CSI (or ESC [[) is followed by a sequence of parameters, at most NPAR (16), that are decimal numbers separated by semicolons. An empty or absent parameter is taken to be 0. The sequence of parameters may be preceded by a single question mark. However, after CSI [[ (or ESC [[ [[) a single character is read and this entire sequence is ignored. (The idea is to ignore an echoed function key.) The action of a CSI sequence is determined by its final character. __ECMA-48 Set Graphics Rendition__ The ECMA-48 SGR sequence ESC [[ __ECMA-48 Mode Switches__ ESC [[ 3 h DECCRM (default off): Display control chars. ESC [[ 4 h DECIM (default off): Set insert mode. ESC [[ 20 h LF/NL (default off): Automatically follow echo of LF, VT or FF with CR. __ECMA-48 Status Report Commands__ ESC [[ 5 n Device status report (DSR): Answer is ESC [[ 0 n (Terminal OK). ESC [[ 6 n Cursor position report (CPR): Answer is ESC [[ ''y'' ; ''x'' R, where ''x,y'' is the cursor location. __DEC Private Mode (DECSET/DECRST) sequences.__ These are not described in ECMA-48. We list the Set Mode sequences; the Reset Mode sequences are obtained by replacing the final `h' by `l'. ESC [[ ? 1 h DECCKM (default off): When set, the cursor keys send an ESC O prefix, rather than ESC [[. ESC [[ ? 3 h DECCOLM (default off = 80 columns): 80/132 col mode switch. The driver sources note that this alone does not suffice; some user-mode utility such as resizecons(8) has to change the hardware registers on the console video card. ESC [[ ? 5 h DECSCNM (default off): Set reverse-video mode. ESC [[ ? 6 h DECOM (default off): When set, cursor addressing is relative to the upper left corner of the scrolling region. ESC [[ ? 7 h DECAWM (default on): Set autowrap on. In this mode, a graphic character emitted after column 80 (or column 132 of DECCOLM is on) forces a wrap to the beginning of the following line first. ESC [[ ? 8 h DECARM (default on): Set keyboard autorepreat on. ESC [[ ? 9 h X10 Mouse Reporting (default off): Set reporting mode to 1 (or reset to 0) - see below. ESC [[ ? 25 h DECCM (default on): Make cursor visible. ESC [[ ? 1000 h X11 Mouse Reporting (default off): Set reporting mode to 2 (or reset to 0) - see below. __Linux Console Private CSI Sequences__ The following sequences are neither ECMA-48 nor native VT102. They are native to the Linux console driver. Colors are in SGR parameters: 0 = black, 1 = red, 2 = green, 3 = brown, 4 = blue, 5 = magenta, 6 = cyan, 7 = white. !!CHARACTER SETS The kernel knows about 4 translations of bytes into console-screen symbols. The four tables are: a) Latin1 - There are two character sets, called G0 and G1, and one of them is the current character set. (Initially G0.) Typing ^N causes G1 to become current, ^O causes G0 to become current. These variables G0 and G1 point at a translation table, and can be changed by the user. Initially they point at tables a) and b), respectively. The sequences ESC ( B and ESC ( 0 and ESC ( U and ESC ( K cause G0 to point at translation table a), b), c) and d), respectively. The sequences ESC ) B and ESC ) 0 and ESC ) U and ESC ) K cause G1 to point at translation table a), b), c) and d), respectively. The sequence ESC c causes a terminal reset, which is what you want if the screen is all garbled. The oft-advised reset__(1) that just does __ The user-defined mapping table can be set using mapscrn(8). The result of the mapping is that if a symbol c is printed, the symbol s = map[[c] is sent to the video memory. The bitmap that corresponds to s is found in the character ROM, and can be changed using __setfont(8).__ !!MOUSE TRACKING The mouse tracking facility is intended to return xterm-compatible mouse status reports. Because the console driver has no way to know the device or type of the mouse, these reports are returned in the console input stream only when the virtual terminal driver receives a mouse update ioctl. These ioctls must be generated by a mouse-aware user-mode application such as the __gpm(8)__ daemon. Parameters for all mouse tracking escape sequences generated by ''xterm'' encode numeric parameters in a single character as ''value''+040. For example, `!' is 1. The screen coordinate system is 1-based. The X10 compatibility mode sends an escape sequence on button press encoding the location and the mouse button pressed. It is enabled by sending ESC [[ ? 9 h and disabled with ESC [[ ? 9 l. On button press, ''xterm'' sends ESC [[ M ''bxy'' (6 characters). Here ''b'' is button-1, and ''x'' and ''y'' are the x and y coordinates of the mouse when the button was pressed. This is the same code the kernel also produces. Normal tracking mode (not implemented in Linux 2.0.24) sends an escape sequence on both button press and release. Modifier information is also sent. It is enabled by sending ESC [[ ? 1000 h and disabled with ESC [[ 1000 l. On button press or release, ''xterm'' sends ESC [[ M ''bxy''. The low two bits of ''b'' encode button information: 0=MB1 pressed, 1=MB2 pressed, 2=MB3 pressed, 3=release. The upper bits encode what modifiers were down when the button was pressed and are added together: 4=Shift, 8=Meta, 16=Control. Again ''x'' and ''y'' are the x and y coordinates of the mouse event. The upper left corner is (1,1). !!COMPARISONS WITH OTHER TERMINALS Many different terminal types are described, like the Linux console, as being `VT100-compatible'. Here we discuss differences vbetween the Linux console an the two most important others, the DEC VT102 and xterm(1). __Control-character handling__ The vt102 also recognized the following control characters: NUL (0x00) was ignored; ENQ (0x05) triggered an answerback message; DC1 (0x11, ^Q, XON) resumed transmission; DC3 (0x13, ^S, XOFF) caused vt100 to ignore (and stop transmitting) all codes except XOFF and XON. VT100-like DC1/DC3 processing may be enabled by the tty driver. The ''xterm'' program (in vt100 mode) recognizes the control characters BEL, BS, HT, LF, VT, FF, CR, SO, SI, ESC. __Escape sequences__ VT100 console sequences not implemented on the Linux console: The program ''xterm'' (in vt100 mode) recognizes ESC c, ESC # 8, ESC '' It recognizes the following with slightly modified meaning: It also recognizes It does not recognize ESC % ... __CSI Sequences__ The ''xterm'' program (as of XFree86 3.1.2G) does not recognize the blink or invisible-mode SGRs. Stock X11R6 versions do not recognize the color-setting SGRs. All other ECMA-48 CSI sequences recognized by Linux are also recognized by ''xterm'', and vice-versa. The ''xterm'' program will recognize all of the DEC Private Mode sequences listed above, but none of the Linux private-mode sequences. For discussion of ''xterm'''s own private-mode sequences, refer to the ''Xterm Control Sequences'' document by Edward Moy and Stephen Gildea, available with the X distribution. !!BUGS In 2.0.23, CSI is broken, and NUL is not ignored inside escape sequences. !!SEE ALSO console(4), console_ioctl(4), charsets(7) ----
4 pages link to
console_codes(4)
:
Man4c
charsets(7)
console(4)
console_ioctl(4)
This page is a man page (or other imported legacy content). We are unable to automatically determine the license status of this page.
