Differences between version 8 and revision by previous author of WooshWireless.
Other diffs: Previous Major Revision, Previous Revision, or view the Annotated Edit History
Newer page: | version 8 | Last edited on Thursday, June 16, 2005 10:17:52 am | by MattBrown | Revert |
Older page: | version 7 | Last edited on Tuesday, June 22, 2004 9:49:56 pm | by JohnMcPherson | Revert |
@@ -12,7 +12,47 @@
In June 2004, Woosh were replaced for the 3 regions it had won the
tender for in the Project Probe broadband initiative when it became
obvious that they would be unable to fulfill the contract.
+
+----
+!! How to configure a Woosh USB Modem under Linux
+
+Use the ethernet connection, I don't know of a way to make the USB connection work. These modems speak PPPoE. The following instructions are for Debian Woody.
+
+apt-get install pppoe
+
+Edit /etc/ppp/peers/dsl-provider, make sure you have the following lines
+<verbatim>
+ user "foo@woosh.co.nz"
+ # if you're using an interface other than eth0 substitute it below
+ pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1452"
+ noipdefault
+ # Comment out if you already have the correct default route installed
+ defaultroute
+ hide-password
+ lcp-echo-interval 60
+ lcp-echo-failure 3
+ # Override any connect script that may have been set in /etc/ppp/options.
+ connect /bin/true
+ noauth
+ persist
+ demand
+ mtu 1492
+</verbatim>
+
+In /etc/ppp/chap-secrets you need a line like
+<verbatim>
+"foo@woosh.co.nz" * "foopassword"
+</verbatim>
+
+Then run
+<verbatim>
+ pon dsl-provider
+</verbatim>
+
+And you should be away.
+
+
----
CategoryCompany