Differences between version 10 and previous revision of Teredo.
Other diffs: Previous Major Revision, Previous Author, or view the Annotated Edit History
| Newer page: | version 10 | Last edited on Friday, December 10, 2004 4:21:10 pm | by PerryLorier | Revert |
| Older page: | version 7 | Last edited on Friday, December 10, 2004 4:02:21 pm | by CraigBox | Revert |
@@ -7,19 +7,19 @@
ipv6 setup
netsh interface ipv6 set teredo client
</pre>
+Windows can tell you whats going on by:
+<pre>
+ netsh interface ipv6 show teredo
+</pre>
now you should be able to use [VoIP] and [P2P] applications that support [IPv6] as if you had a real world IP address.
Teredo won't work if:
* You have a realworld [IPv6] address from somewhere else.
-* You have a "restrictive
[NAT]" (if you have one of these, please click the edit button at the bottom of this page and list it here!)
+* You have a "symmetric
[NAT]" (if you have one of these, please click the edit button at the bottom of this page and list it here!), the only solution here is to find some other way to get an IPv6 address (maybe 6to4 on your NAT device) or replace your NAT device. Sorry.
+** Linux 2.4 and above use symmetric NAT, if this is your problem, try setting up [6to4] on your Linux box instead of using Teredo.
* Theres a firewall between you and the teredo server.
* You're on a Windows domain (in that case use =netsh interface ipv6 set teredo enterpriseclient= instead)
-
-Windows can tell you whats going on by:
-<pre>
- netsh interface ipv6 show teredo
-</pre>
----
CategoryNetworking
