Differences between version 7 and revision by previous author of SpeedTouch510.
Other diffs: Previous Major Revision, Previous Revision, or view the Annotated Edit History
| Newer page: | version 7 | Last edited on Friday, July 23, 2004 5:32:28 pm | by CraigBox | Revert |
| Older page: | version 5 | Last edited on Monday, March 15, 2004 10:42:14 am | by BlairHarrison | Revert |
@@ -1,16 +1,30 @@
+SPAWN OF SATAN
+
+
Supports all the features of the [AlcatelSpeedTouch] Home/Pro but has the addition of [DHCP] spoofing and a default internal [IP] address to send all requests for external ports to.
DO NOT USE THE DHCP SPOOFING WITH LINUX, it is very broken!, causes default gateway to go to a random number about once a month and messes with resolv.conf putting in incorrect name servers.
----
-The main advantage of the (Thompson, once Alcatel) SpeedTouch 510 is UniversalPlugAndPlay, a new standard supported by Windows XP that means you can see the [DSL] modem in your "network connections" tab, and automatically set up [NAT] pin holes for things you run on your UPNP client.
+The main advantage of the (Thompson, once Alcatel) !
SpeedTouch 510 is UniversalPlugAndPlay, a new standard supported by Windows XP that means you can see the [DSL] modem in your "network connections" tab, and automatically set up [NAT] pin holes for things you run on your UPNP client.
Turn it off. Its broken, you really don't want it, they don't recommend you use it yet.
That, and the web interface sucks. Most config can only be done through an upload of a config file. You can flash a 510 to a Pro, save yourself a lot of effort and stress.
----
+!How to perform a hardware reset to factory defaults
+(IP address: 10.0.0.138)
+
+# Make sure the !SpeedTouch is powered off.
+# Press the power button once (shortly).
+# As soon as the Power/System LED is flashing green, press the power button once more (shortly).
+# The Power/System LED stops flashing to become solid green. After six seconds, it starts flashing green again. Press the power button once more (shortly).
+# All LEDs flash green once.
+# The !SpeedTouch reboots and will come online with factory default settings.
+
+---
Evil, EVIL, config...
Here's a nice simple starter, that will at least let you test the connectivity.
@@ -110,9 +124,9 @@
ifconfig intf=0 type=auto
[[ dnsd.ini ]
domain domain="lan"
- add hostname="SpeedTouch"
+ add hostname="!
SpeedTouch"
start
troff
[[ dhcc.ini ]
