Differences between version 8 and revision by previous author of ScannerNotes.
Other diffs: Previous Major Revision, Previous Revision, or view the Annotated Edit History
| Newer page: | version 8 | Last edited on Wednesday, May 17, 2006 12:33:53 pm | by AristotlePagaltzis | Revert |
| Older page: | version 7 | Last edited on Wednesday, May 17, 2006 11:45:54 am | by IanMcDonald | Revert |
@@ -7,9 +7,9 @@
You can control which scanner drivers are loaded in [SANE]'s <tt>dll.conf</tt> file (located in <tt>/etc/sane.d/dll.conf</tt> in [Debian] Sarge.)
Sane should also come with appropriate HotPlug scripts. Make sure you have appropriate permissions to access the device - in [Debian], the [USB] device file will be read-/writable by people in the <tt>scanner</tt> group, so add any users to that group (and log out and back in for changes to your current user to take effect).
-Some scanners (e.g. Acer/Benq) need to have firmware installed on your PC to copy to the scanner. For Acer/Benq go to [Benq website|http://www.benq.co.uk/serviceandsupport/downloads/index.cfm?productline=9] and select your product. Extract the .bin file from the driver files and edit the file <tt>/etc/sane.d/snapscan.conf</tt> at the top where it says firmware to point to the .bin file you downloaded.
+Some scanners (e.g. Acer/Benq) need to have firmware installed on your PC to copy to the scanner. For Acer/Benq go to [Benq website|http://www.benq.co.uk/serviceandsupport/downloads/index.cfm?productline=9] and select your product. Extract the <tt>
.bin</tt>
file from the driver files and edit the file <tt>/etc/sane.d/snapscan.conf</tt> at the top where it says firmware to point to the <tt>
.bin</tt>
file you downloaded.
!! Hardware hints
If you are looking for a hardware flatbed scanner that works under linux, Epson-branded [Scanner]s seem to be well supported. HewlettPackard scanners and printer/scanners also seem to be well supported. [HP] have supported <tt>hpoj</tt> and <tt>hpijs</tt> drivers which are included in some distros.
