Differences between version 2 and revision by previous author of RS232.
Other diffs: Previous Major Revision, Previous Revision, or view the Annotated Edit History
| Newer page: | version 2 | Last edited on Monday, December 8, 2003 11:31:58 am | by JohnMcPherson | Revert |
| Older page: | version 1 | Last edited on Monday, December 8, 2003 10:42:51 am | by PerryLorier | Revert |
@@ -1,7 +1,10 @@
RS232 is a standard for serial connections. In theory there are two ends to a RS232 connection a [DTE] and a [DCE].
-RS232 uses pin 7 for ground, and pin's
2 and 3 for transmit and recieve
. Other pins are used for hardware flow control, Ring indication etc.
+RS232 uses pin 7 for ground, and pins
2 and 3 for transmit and receive
. Other pins are used for hardware flow control, Ring indication etc.
RS232 requires you to select a transmit/receieve rate called a baud rate. "Standard" PC's support up to 115200 baud. Almost everything defaults to 9600 (although not always).
-It doesn't matter what baud rate you choose, if it's not plugged in
+Perry's helpful discovery for debugging serial connections:
+ <Remosi>
It doesn't matter what baud rate you choose, if it's not plugged in
+
+See mouse(4) for an example of low level driver details, and see [HowToSerialHOWTO] for a very detailed background and discussion.
