Differences between version 8 and previous revision of PXE.
Other diffs: Previous Major Revision, Previous Author, or view the Annotated Edit History
| Newer page: | version 8 | Last edited on Thursday, April 1, 2004 8:31:54 pm | by StuartYeates | Revert |
| Older page: | version 7 | Last edited on Thursday, April 1, 2004 3:58:57 pm | by MattBrown | Revert |
@@ -1,19 +1,19 @@
[PXE] is a network-boot protocol. It stands for Pre-boot eXecution Environment. It is esentially the same as Etherboot.
-Most modern adapters support PXE now, although they generally still need to have the PXE BIOS enabled for this to work.
+Most modern adapters support PXE now, although they generally still need to have the PXE [
BIOS]
enabled for this to work.
Some NICs (chipsets actually) that support [PXE] Booting:
* Realtek 8139
* Intel Pro 100 family
* Lots of 3Com cards
-If you have a PXE bootable card, and a compliant motherboard BIOS, it will boot off PXE just fine. You can see it trying to do this as the machine boots - it might prompt to boot off the NIC, or it might say something about DHCP, or so on.
+If you have a PXE bootable card, and a compliant motherboard BIOS, it will boot off PXE just fine. You can see it trying to do this as the machine boots - it might prompt to boot off the NIC, or it might say something about [
DHCP]
, or so on.
-If for some reason your machine wont boot via PXE (I found in my dual ppro motherboard that if I had a disk enabled it wouldn't let me boot off the NIC - I had to disable the drive. As I was trying to use PXE to bootstrap a network install, that didn't help me much), you can perhaps use Microsofts Remote Install Services disk. This is a bootdisk which has the bootcode for PXE for a range of disks on it. More information is [here|http://www.microsoft.com/technet/treeview/default.asp?url=/technet/prodtechnol/windowsserver2003/proddocs/server/sag_RIS_Boot_Floppy.asp]
+If for some reason your machine wont boot via PXE (I found in my dual ppro motherboard that if I had a disk enabled it wouldn't let me boot off the [
NIC]
- I had to disable the drive. As I was trying to use PXE to bootstrap a network install, that didn't help me much), you can perhaps use Microsofts Remote Install Services disk. This is a bootdisk which has the bootcode for PXE for a range of disks on it. More information is [here|http://www.microsoft.com/technet/treeview/default.asp?url=/technet/prodtechnol/windowsserver2003/proddocs/server/sag_RIS_Boot_Floppy.asp]
Here is an (untested) image of a PXE-on-disk bootdisk. http://www.wlug.org.nz/archive/PXE/pxebootdisk.img.
dd if=./pxebootdisk.img of=/dev/fd0
will write it to a floppy disk for you
-The next step, of course, is to making your PXE booting machine do something... PXELinu
], which is part of SysLinux, will help you out here. PXES, mentioned on the DisklessWorkstationNotes page also makes use of PXE
+The next step, of course, is to making your PXE booting machine do something... [PXELinux
], which is part of SysLinux, will help you out here. PXES, mentioned on the DisklessWorkstationNotes page also makes use of PXE
Information on how to PXE boot a Soekris board can be found at [SoekrisPXEBoot]
