Home
Main website
Display Sidebar
Hide Ads
Recent Changes
View Source:
OpenVPN
Edit
PageHistory
Diff
Info
LikePages
You are viewing an old revision of this page.
View the current version
.
* OpenVPN bridging with a Windows RoadWarrior so, first http://openvpn.sf.net, download linux and windows binaries setup your kernel for briding and tun/tap devices create /dev/net/tun by mkdir /dev/net mknod /dev/net/tun c 10 200 configure /etc/network/interfaces to bring up tap0/tap1/br0 as follows auto tap0 iface tap0 inet static address 0.0.0.0 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 pre-up /usr/local/sbin/openvpn --mktun --dev tap0 auto tap1 iface tap1 inet static address 0.0.0.0 netmask 255.255.255.0 network 192.168.1.10 broadcast 192.168.1.255 pre-up /usr/local/sbin/openvpn --mktun --dev tap1 auto br0 iface br0 inet static address 192.168.1.x network 192.168.1.0 netmask 255.255.255.0 broadcast 192.168.1.255 bridge_ports tap0 tap1 eth0 Pretty good documentation of OpenVPN can be found at http://openvpn.sourceforge.net/bridge.html and http://openvpn.sourceforge.net/install32.html Also http://fedoranews.org/contributors/florin_andrei/openvpn/
4 pages link to
OpenVPN
:
IPSec
VirtualPrivateNetwork
OpenVPNNotes
GerwinVanDeSteeg