Differences between version 3 and previous revision of OpenVPN.
Other diffs: Previous Major Revision, Previous Author, or view the Annotated Edit History
| Newer page: | version 3 | Last edited on Friday, July 23, 2004 2:27:47 pm | by MichaelBordignon | Revert |
| Older page: | version 2 | Last edited on Friday, July 23, 2004 2:27:21 pm | by MichaelBordignon | Revert |
@@ -9,30 +9,30 @@
mknod /dev/net/tun c 10 200
configure /etc/network/interfaces to bring up tap0/tap1/br0 as follows
-auto tap0
-iface tap0 inet static
-address ...
-netmask 255.255.255.
-network 192.168.1.
-broadcast 192.168.1.255
-pre-up /usr/local/sbin/openvpn --mktun --dev tap0
+
auto tap0
+ iface tap0 inet static
+ address ...
+ netmask 255.255.255.
+ network 192.168.1.
+ broadcast 192.168.1.255
+ pre-up /usr/local/sbin/openvpn --mktun --dev tap0
-auto tap1
-iface tap1 inet static
-address ...
-netmask 255.255.255.
-network 192.168.1.10
-broadcast 192.168.1.255
-pre-up /usr/local/sbin/openvpn --mktun --dev tap1
+
auto tap1
+ iface tap1 inet static
+ address ...
+ netmask 255.255.255.
+ network 192.168.1.10
+ broadcast 192.168.1.255
+ pre-up /usr/local/sbin/openvpn --mktun --dev tap1
-auto br0
-iface br0 inet static
-address 192.168.1.x
-network 192.168.1.
-netmask 255.255.255.
-broadcast 192.168.1.255
-bridge_ports tap0 tap1 eth0
+
auto br0
+ iface br0 inet static
+ address 192.168.1.x
+ network 192.168.1.
+ netmask 255.255.255.
+ broadcast 192.168.1.255
+ bridge_ports tap0 tap1 eth0
Pretty good documentation of OpenVPN can be found at
http://openvpn.sourceforge.net/bridge.html and http://openvpn.sourceforge.net/install32.html
