You are viewing an old revision of this page.
These notes are based on my observations with an M11, but I assume the others are similar.
There are lots of these modem/routers around, as TelecomNZ used to rent them out when ADSL was first available here.
They support pinholing.
Useful tips:
- they run a telnet server, and optionally a HTTP server, for configuration
- The password is "Telecom". Username can be anything.
- useful console commands:
status
show help (all commands for displaying info)
configure (to change settings)
- Put telnet on port 1, HTTP on port 2, and forward all the other ports to your Linux machine.
- The nokia / Telecom logo on the front is actually on a panel that you can open to find a serial port. However, it is an RJ-45 so you will need to find an appropriate cable.