Differences between version 6 and previous revision of LinuxRouter.
Other diffs: Previous Major Revision, Previous Author, or view the Annotated Edit History
| Newer page: | version 6 | Last edited on Monday, May 15, 2006 1:21:17 pm | by CraigBox | Revert |
| Older page: | version 5 | Last edited on Friday, September 23, 2005 12:32:18 pm | by MatthiasDallmeier | Revert |
@@ -1,34 +1 @@
-''"Hey! What's going on?"%%%
-"The Internet is broken"%%%
-"Oh, I'll try later"''
-
-I know nothing about advanced routing under Linux, but hopefully Perry will write most of this page for me.
-
-!! The Problem
-
-We have a LAN (192.168../24), a DMZ with public IP addresses (210.55.23./26), an ADSL router (192.168.253.254), a CID connection (210.55.254.60/30), and a Linux box (Fedora Core 4) with four network cards to connect all of the above.
-
-* eth0: LAN
-* eth1: DMZ
-* eth2: CID
-* eth3: DSL
-
-! Additional requirements
-* Users on the LAN are to use the DSL connection to access the Internet
-* Connections to our DMZ are coming in on the CID connection
-* A number of public IP addresses are reserved for VPN connections into the LAN (using AD authentication)
-
-
-!! The Solution
-
-! VPN server
-We set up
[Poptop|http://www.poptop.org/
] as described in [Replacing a Windows PPTP Server with Linux|http://poptop.sourceforge.net/dox/replacing-windows-pptp-with-linux-howto.phtml] and [PopTop + MSCHAPv2 + Samba + Radius + Microsoft Active Directory + Fedora Howto|http://www.members.optushome.com.au/~wskwok/poptop_ads_howto_1.htm].
-
-For every public VPN IP address we create a ifcfg-eth1:x file, where x is any number. In our case, we chose the last byte of the IP address. You probably want to start numbering at 1 instead.
-
-ifcfg-eth1:50
-
-<pre>
-IPADDR=210.55.23.50
-NETMASK=255.255.255
.192
-</pre>
+Describe
[LinuxRouter
] here
.
