Differences between version 15 and predecessor to the previous major change of LiloErrorCodes.
Other diffs: Previous Revision, Previous Author, or view the Annotated Edit History
| Newer page: | version 15 | Last edited on Monday, July 18, 2005 4:42:03 pm | by PerryLorier | Revert |
| Older page: | version 14 | Last edited on Wednesday, June 29, 2005 8:48:39 pm | by JwDeBleser | Revert |
@@ -17,8 +17,9 @@
|0x11|__[ECC] correction successful__: A read error occurred, but was corrected. LILO does not recognize this condition and aborts the load process anyway. A second load attempt should succeed.
|0x20|__Controller error__: This shouldn't happen, then again, none of these errors should happen eh?
|0x40|__Seek failure__: This might be a media problem. Try booting again.
|0x80|__Disk timeout__: The disk or the drive isn't ready. Either the media is bad or the disk isn't spinning. If you're booting from a floppy, you might not have closed the drive door. Otherwise, trying to boot again might help.
+|0x99|__Linear__: Linear needs to be set on the disk (see below)
|0xBB|__BIOS error__: This shouldn't happen. Try booting again. If the problem persists, removing the COMPACT option or adding/removing LINEAR or LBA32 might help.
