Differences between version 23 and previous revision of LiloErrorCodes.
Other diffs: Previous Major Revision, Previous Author, or view the Annotated Edit History
| Newer page: | version 23 | Last edited on Sunday, November 13, 2005 7:32:28 pm | by JustinSwatsenbarg | Revert |
| Older page: | version 22 | Last edited on Sunday, November 13, 2005 5:02:33 am | by JustinSwatsenbarg | Revert |
@@ -20,9 +20,9 @@
|0x20|__Controller error__: This shouldn't happen, then again, none of these errors should happen eh?
|0x40|__Seek failure__: This might be a media problem. Try booting again.
|0x80|__Disk timeout__: The disk or the drive isn't ready. Either the media is bad or the disk isn't spinning. If you're booting from a floppy, you might not have closed the drive door. Otherwise, trying to boot again might help.
|0x99|__Invalid Second Stage__: Mismatch between drive and BIOS geometry, or a bad map file. Some evidence that 'Linear' needs to be set on the disk (see [LiloNotes])
-|0x9A|__Can't Find Second Stage__: Check to see if you have the correct device for boot. Ex: boot=/dev/hda1 when it should be in the MBR i.e. boot=/dev/hda Drive geometry mismatch may be an issue as well
.
+|0x9A|__Can't Find Second Stage__: Check to see if you have the correct device for boot. Ex: '
boot=/dev/hda1'
when it should be in the MBR i.e. '
boot=/dev/hda'
.
|0xBB|__BIOS error__: This shouldn't happen. Try booting again. If the problem persists, removing the COMPACT option or adding/removing LINEAR or LBA32 might help.
?>
