Home
Main website
Display Sidebar
Hide Ads
Recent Changes
View Source:
IPv6Setup
Edit
PageHistory
Diff
Info
LikePages
You are viewing an old revision of this page.
View the current version
.
;[Linux]: make sure ipv6 is either compiled into the [Kernel], or modprobe ipv6 %%% For debugging, you'll want to (Debian) apt-get install iputils-tracepath and iputils-ping If you want a statically assigned address, you'll probably want a freenet6 tunnel. You can get a tunnel from [http://www.freenet6.net] or (in Australia, maybe in NewZealand too if there are no local ones there) [http://broker.aarnet.net.au]. The tunnel broker recommended by Andy Linton during his talk on the [APE]-[WIX] [IPv6] testbed was [Hurricane Electric|http://www.tunnelbroker.net]. For [Debian], do apt-get install freenet6 ;[Windows] XP: start up a command prompt and type ipv6 install ;Windows 2K: The following URL may be of some assistance http://msdn.microsoft.com/downloads/sdks/platform/tpipv6/readme.asp ;[FreeBSD]: GENERIC supports it by default, but otherwise compile support into your kernel with the following options options INET6 device gif #IPv6 and IPv4 tunneling device faith #for [IPv6] and [IPv4] translation device stf #6to4 IPv6 over IPv4 encapsulation Specifically, don't try and give your client machines IP addresses. use zebra or radvd on your gateway. fec0:0:0:ffff::{1,2,3} are reserved to be aliased onto name servers. Thus client machines can set their dns servers to these addresses and just use DNS. See http://www.ietf.org/internet-drafts/draft-ietf-ipv6-dns-discovery-07.txt This draft has expired. ---- Cheap way of installing IPv6 under linux is to grab http://www.linux.it/~md/6to4 and put it in your /etc/init.d directory and set it to run on boot. You're done. See [6to4] for a more involved explaination as to what this script does. ----- CategoryNetworking
2 pages link to
IPv6Setup
:
MetaNetIPv6
IPv6