Differences between version 22 and revision by previous author of IPv6Setup.
Other diffs: Previous Major Revision, Previous Revision, or view the Annotated Edit History
| Newer page: | version 22 | Last edited on Saturday, July 25, 2009 1:50:16 pm | by KarlAuer | Revert |
| Older page: | version 20 | Last edited on Saturday, July 21, 2007 4:03:33 am | by JeroenMassar | Revert |
@@ -7,8 +7,9 @@
(alphabetically)
* [AARNet | http://broker.aarnet.net.au] in Australia and maybe in New Zealand too (uses Hexago's Gateway6)
* [Go6 | http://www.go6.net] is one of the most common tunnel providers (uses Hexago's Gateway6)
+* [IPv6Now | http://www.ipv6now.com.au] in Australia (uses Hexago's Gateway6, offers static tunnels)
* [Hurricane Electric | http://www.tunnelbroker.net] was recommended by Andy Linton during his talk on the [APE]-[WIX] [IPv6] testbed.
* [SixXS ACSData PoP | http://www.sixxs.net/pops/acsdata/] in Wellington, New Zealand
Seem to not exist/function anymore:
@@ -22,12 +23,12 @@
SixXS also allows manual configuration though, eg with static tunnels. Manual configuration is partially possible with Hexago's Gateway6.
If you want a statically assigned address, you'll probably need to use a tunnel broker, which is most likely, latency wise etc, a good idea anyhow. Otherwise you can try [6to4] or [Teredo] though latency for those and debugging is far from optimal, they also don't provide static addresses.
-* For Hexago's Gateway6: issue <tt>apt-get install tspc</tt>
+* For Hexago's Gateway6: issue <tt>apt-get install tspc</tt>. This is a very old version of the Gateway6 client. The current version is called gw6c and is available from the [Go6 site | http://www.go6.net] site or from the [IPv6Now site | http://www.ipv6now.com.au/downloads.php], amongst others. There are source and binary distributions.
* For SixXS: issue <tt>apt-get install aiccu</tt>
-Both [AICCU | http://www.sixxs.net/tools/aiccu/] and [Gateway6 Client | http://www.go6.net/4105/description.asp?product_id=169&category_id=276] are also available for Windows, and the various BSD's.
+Both [AICCU | http://www.sixxs.net/tools/aiccu/] and the
[Hexago
Gateway6 Client | http://www.go6.net/4105/description.asp?product_id=169&category_id=276] are also available for Windows, and the various BSD's.
!!! [Linux]
Make sure [IPv6] is either compiled into the [Kernel], or compile it as a module and load it by way of <tt>modprobe ipv6</tt>.
