Sybase Adaptive Server Anywhere for Linux HOWTO
Tom.Slee@sybase.com
Revision HistoryRevision 1.02001-04-26Revised by: alFirst public release.
This HOWTO guides you through the installation of SQL Anywhere
Studio 7.0.2 for Linux and the basic operation and administration of Adaptive Server Anywhere databases.
----; Table of Contents; 1. Introduction: ; 1.1. New versions of this document; 1.2. Content and Audience; 1.3. Adaptive Server Anywhere features; 1.4. Quirks: ; 1.4.1. Alt and Function keys; 1.5. What's a Relational Database?: ; 1.5.1. Definition; 1.5.2. Example; 1.5.3. Primary and Foreign Keys; 2. Requirements: ; 2.1. System requirements; 2.2. Supported distributions; 3. Installation: ; 3.1. Process; 3.2. Distribution-specific considerations (for !TurboLinux? and Caldera); 3.3. Setting the Environment Variables; 3.4. Where did it get installed?; 4. Creating, Running and Connecting to Databases: ; 4.1. Creating a database: ; 4.1.1. Creating a database from the command prompt; 4.1.2. Creating a database from Sybase Central; 4.2. Running a database server and starting databases: ; 4.2.1. Running the server as a daemon; 4.3. Stopping the database server; 4.4. Stopping databases; 4.5. Connecting to a database: ; 4.5.1. Connection strings; 4.5.2. Connecting from Interactive SQL; 4.5.3. Connecting via ODBC: ; 4.5.3.1. Setting up ODBC with Adaptive Server Anywhere; 4.5.3.2. About ODBC data sources; 4.5.3.3. Connecting to an ODBC data source; 5. Backing up and Restoring a Database: ; 5.1. Creating a Backup of the Database: ; 5.1.1. Full vs. Incremental Backups; 5.1.2. Online vs. Offline Backups; 5.1.3. Server-side vs. Client-side Backups; 5.1.4. How to make a backup: ; 5.1.4.1. From the command line; 5.1.4.2. From SQL; 5.1.4.3. From Sybase Central; 5.2. Validating the database and its backup; 5.3. Recovering the database; 6. Managing a Database: ; 6.1. Tables: ; 6.1.1. Creating a Table; 6.1.2. Making Alterations to Tables; 6.2. Users, permissions, and authorities: ; 6.2.1. User IDs: ; 6.2.1.1. Special user IDs; 6.2.1.2. Creating new user IDs; 6.2.2. Permissions; 6.2.3. Authorities: ; 6.2.3.1. RESOURCE authority; 6.2.3.2. DBA authority; 6.2.4. Removing Users and Revoking Permissions; 6.2.5. Changing Passwords; 6.3. Making the database more secure: ; 6.3.1. Increasing password security; 6.3.2. Views, procedures, and triggers; 6.3.3. Encrypting client/server communications; 7. Where to get more information; 8. Legalities and Acknowledgements: ; 8.1. Copyright and Licenses; 8.2. Names and Contacts; 8.3. Acknowledgement----
This HOWTO guides you through the installation of SQL Anywhere Studio 7.0.2 for Linux and the basic operation and administration of Adaptive Server Anywhere databases.
The latest version of this document should always be available
at the Linux Documentation project website (
http://www.linuxdoc.org/).
Within this document, you will find a list of the supported Linux distributions ("Section 2"). It is intended for moderately experienced users of Linux or UNIX. Familiarity with relational database concepts is certainly useful, but not a requirement. "Section 1.5" contains a summary of relational database concepts.
Adaptive Server Anywhere (Adaptive Server Anywhere) is the full SQL relational database management system at the heart of SQL Anywhere Studio. Ideally suited for use as an embedded database, in mobile computing, or as a workgroup server, it includes the following among its features:
****
Economical hardware requirements
**** ****
Designed to operate without administration
**** ****
Designed for mobile computing and synchronization
**** ****
Ease of use
**** ****
High performance
**** ****
Cross-platform solution
**** ****
Standalone and network use
**** ****
Industry standard interfaces
****
Some of the more specific features include:
****
Stored procedures and triggers
**** ****
Java support for logic and datatypes
****
For further details about Adaptive Server Anywhere, please visit the following links:
****
http://www.sybase.com/detail/1,3693,1002624,00.html is
a datasheet on SQL Anywhere Studio. It includes some data on
Adaptive Server Anywhere, which ships as a component of SQL Anywhere
Studio.
**** ****
http://www.sybase.com/detail/1,3693,1009210,00.html
has some information on the features and system requirements of
SQL Anywhere Studio and points you to the download location for
SQL Anywhere Studio for Linux 7.0.
****----
Sometimes the Alt keys or the F1-F10 keys may not function in the terminal where you are running Interactive SQL.
To emulate the Alt key, press Ctrl-A. Then press whatever key was to be pressed with the Alt key. For example, instead of pressing Alt-F, you would press Ctrl-A, then F.
To emulate the function keys, press Ctrl-F, followed by the number of the function key you wanted to press. For example, instead of pressing F9, you would press Ctrl-F, then 9. For F10, use the zero key.
If you are already familiar with relational databases, you can skip this section.
A relational database-management system (RDBMS) is a system for storing and retrieving data, in which the data is organized in tables. A relational database consists of a collection of tables that store interrelated data.
If that doesn't quite make sense yet, read on.
Suppose you have some software to keep track of sales orders, and each order is stored in the form of a table, called sales_order. It has information about the customer (for example, her name, address and phone number), the date of the order, and information about the sales representative (for example his name, department, and office phone number). Let's put all this into a table, with the data for a few orders:
Table 1. The sales_order table
cust_namecust_addresscust_city_state_zipcust_phoneorder_dateemp_nameemp_deptemp_phoneM. Devlin3114 Pioneer Ave.Rutherford, NJ 07070201555896619930316R. OverbeySales5105557255M. Devlin3114 Pioneer Ave.Rutherford, NJ 07070201555896619940405M. KellySales5085553769J. Gagliardo2800 Park Ave.Hull, PQ K1A 0H3819555953919940326M.GarciaSales7135553431E. Peros50 Market St.Rochester, NY 14624716555427519930603P. ChinSales4045552341E. Peros50 Market St.Rochester, NY 14624716555427519940127M.GarciaSales7135553431E. Peros50 Market St.Rochester, NY 14624716555427519940520J. KlobucherSales7135558627
Everything appears nice and ordered, but there's a fair bit of redundancy. M. Devlin's name appears twice, along with his address and phone number. E. Peros' details appear three times. If you look carefully at the employee side of things, you'll notice that M. Garcia is repeated, as well.
Wouldn't it be nice if you could separate that information and only store it once, rather than several times? In the long term, it would certainly save disk space and allow for greater flexibility. Since redundant data entry is minimized, it would also reduce the chances of erroneous data entering the database, increasing consistency. Well, we can see three different entities involved here: the customer, the order, and the employee. So let's take each of the individuals, put them into categories, and give them identification numbers so they can be referenced.
Table 2. The customer table
idnameaddresscity_state_zipphone101M. Devlin3114 Pioneer Ave.Rutherford, NJ 070702015558966109J. Gagliardo2800 Park Ave.Hull, PQ K1A 0H38195559539180E. Peros50 Market St.Rochester, NY 146247165554275
Table 3. The employee table
idnamedeptphone299R. OverbeySales5105557255902M. KellySales5085553769667M.GarciaSales7135553431129P. ChinSales4045552341467J. KlobucherSales7135558627
Table 4. The new sales_order table
idcust_idorder_datesales_rep_id200110119930316299258310119940405902257610919940326667208118019930603129250318019940127667264018019940520467
As you can see, each customer's information is stored only once, and the same goes for each employee. The sales_order table is a lot smaller, too. Each row, representing a sales order, refers to a cust_id and an emp_id.
By looking up the customer corresponding to a cust_id (which is unique), one can find all the needed data on that customer, without having to repeat it in sales_order. In addition, an id column has been added. Its purpose will be explained in the next section.
Why do this, you ask? By eliminating redundancy, this kind of structure reduces the opportunities for inconsistencies to seep in, in addition to lowering storage requirements. If you had to change E. Peros' address in the old sales_order table, you'd have to do it three times, which would take three times as long and give you three times as many chances to make an error. In the newer table, all you'd have to do is change her address once, in the customer table. Also, by carefully separating data, you make access control simpler.
Finally, can you spot another redundancy? The employee table has "Sales" all the way down the dept column. For an organization with multiple departments, you'd want to add a department table and reference it from a dept_id column instead.
As described in the previous section, you can separate a table into interrelated tables. But how do you go about relating tables to each other? In relational databases, primary keys and foreign keys help you link tables together. Primary keys are columns that uniquely identify each row of a table, and foreign keys define the relationship between the rows of two separate tables. Proper use of primary and foreign keys will help you efficiently hold information without excessive redundancy.
Every table should have a primary key to ensure that each row is uniquely identified. This often takes the form of an ID number being assigned to each row, as in the previous section's example. The id column forms the primary key.
As long as you can guarantee the uniqueness of the data in a particular column, though, that column can be a primary key. For example, if you only want one entry per day to be put into a particular table, you could use the date as that table's primary key.
Tables are related to one another by foreign keys. In the sales_order example, the cust_id and sales_rep columns would be called foreign keys to the customer and employee tables, respectively. For terminology's sake, you might want to know that in this case, the sales_order table is called the foreign or referencing table, while the customer and employee tables are called the primary or referenced tables.
Adaptive Server Anywhere requires that you have the following installed on your system:
****
kernel 2.2.5-15 and up (2.2.x series)
**** ****
glibc-2.1 or up
**** ****
pthreads-0.8 or higher (included usually as part of glibc)
**** ****
libstdc++-2-libc6.1
****----
At present, the following Linux distributions are supported:
****
Caldera 2.4
**** ****
Red Hat 7.0, 6.2, 6.1 or 6.0
**** ****
**** ****
SuSE 7.0, 6.4, 6.3 or 6.2
****
NOTE: The glibc and gcc released with Red Hat Linux 7.0 require
patches before you can use Adaptive Server Anywhere. You can find
them at http://www.redhat.com/support/errata/rh7-errata-bugfixes.html.
***#
Log on as root.
***# ***#
Place the CD-ROM into the CD-ROM drive.
***# ***#
Mount the CD-ROM. Usually, it gets mounted to /mnt/cdrom. If so, enter the following command:
mount /mnt/cdrom
***# ***#
At a command prompt, change to the CD-ROM directory. If the CD-ROM was mounted to /mnt/cdrom/, use the following command:
cd /mnt/cdrom
***# ***#
Start the setup script by entering the following command:
./setup
***# ***#
The setup script prompts you with information about installing SQL Anywhere Studio for UNIX. Enter any information you are prompted for, and press the Enter key to continue.
***#
By default, SQL Anywhere Studio is installed into a directory named SYBSsa7 under /opt/sybase on Solaris, Linux, and HP-UX, and under /usr/lpp/sybase on AIX. You can specify another installation directory if you wish.
(for !TurboLinux? and Caldera)
After installation, you should follow these instructions if you are running either !TurboLinux? 6.0 or Caldera 2.2.
For !TurboLinux? 6.0 only, change to directory /usr/lib and create a symbolic link using the following command.
ln -s libstdc++-libc6.1-2.so.3 libstdc++-libc6.1-1.so.2
For Caldera 2.2 only, change to directory /usr/lib and create a symbolic link using the following command.
ln -s /usr/lib/libstdc++-2.9.0 /usr/lib/libstdc++-libc6.1-1.so.2
Each user who uses the software must set the necessary environment variables for Adaptive Server Anywhere. To help you do that, the installation program puts two script files, asa_config.sh and asa_config.csh, in the directory /!InstallDir?/SYBSsa7/bin. !InstallDir? is the directory where you chose to install Adaptive Server Anywhere.
Depending on which shell you're using, enter the appropriate command from !InstallDir?.
Table 5.
If you're using this shell......use this command.sh, ksh, bash. ./SYBSsa7/bin/asa_config.shcsh, tcshsource ./SYBSsa7/bin/asa_config.csh
You may also want to insert the above commands into your copy of .profile or .bash_profile to have the environment variables ready every time you log in.
Table 6.
Most Adaptive Server Anywhere command line utilities (names beginning with db)/!InstallDir?/SYBSsa7/binSybase Central/!InstallDir?/shared/sybcentral40/javaSample database/!InstallDir?/SYBSsa7Online documentation/CDROM/help/contents.htm or/!InstallDir?/SYBSsa7/doc/contents.htm
CDROM is the directory where your CD-ROM is mounted, which is usually /mnt/cdrom/.
!InstallDir? is the directory where you chose to install Adaptive Server Anywhere.
The first two directories are put into the path by asa_config.sh or asa_config.csh, so if you've already executed one of them as mentioned in the previous section, you won't have to change directories to get to most of the executables associated with Adaptive Server Anywhere.
When you ask Adaptive Server Anywhere to create a database, it creates the main database file, which contains the following objects, among others:
****
user tables
**** ****
indexes
**** ****
views
**** ****
system tables
****
The maximum size of a database file depends on your file system and the page size you choose. Database files are limited to 256 million database pages or the filesize limit, whichever is reached first. UNIX files can be as large as 1 Tb, in some cases-see the Physical Limitations chapter of the Adaptive Server Anywhere Reference Manual or your Linux documentation for more information. You can set pages to be 1, 2, 4, 8, 16, or 32 kb in size, but it is not recommended that you use a page size of 1 kb. The default page size is 2 kb.
By default, Adaptive Server Anywhere also creates a file called the transaction log. Besides improving performance, the transaction log is vital to Adaptive Server Anywhere replication systems and database recovery in event of system failures. When possible, it is recommended that the transaction log be placed on a physical device (in most cases, a disk drive) separate from the main database file, to reduce the chances of both the main database file and transaction log being affected in the event of a media failure. You can specify the name and location of the transaction log when you create the database.
This section shows you how to create databases at either the command prompt or in Interactive SQL. You can also create databases through Sybase Central, if you prefer, by opening the Utilities folder under Adaptive Server Anywhere 7.
from the command prompt
The command line utility for creating a database is dbinit.
Syntax:
dbinit [switches? db-file-name
db-file-name is the name you would like to give to your database file, for example, mydb.db. If you issue the command "dbinit -?" you'll be shown the above syntax, along with a list of options you can use.
To create your first Adaptive Server Anywhere database on Linux, enter the following command:
dbinit -t './logs/mydb.log' p 4096 mydb.db
This command creates a database in the current working directory called mydb.db with a page size of 4096 bytes, specified by the
log mydb.log in the subdirectory "logs," specified by the -t switch. Adaptive Server Anywhere databases carry the extension ".db" .
from Sybase Central
To create a database in Sybase Central, open the Adaptive Server Anywhere section of the left pane, and select Utilities. Double-click Create Database in the right pane, and follow the on-screen instructions.
There are two versions of the database server installed on your machine. If you are just using Adaptive Server Anywhere locally, use the personal database server (dbeng7). If you are going to connect to the Adaptive Server Anywhere database over a network, however, you should use the network database server (dbsrv7). Examples in this document use dbeng7, but the two commands are, for the most part, interchangeable. See the table below for specific differences.
Table 7. Differences between the Personal and Network database servers
Personal database server Network database server Name of executabledbeng7dbsrv7Local connectionsYesYesNetwork connectionsNoYesMaximum number of connections10Depends on licenseAvailable communications protocolsShared memory, TCP/IPShared memory, TCP/IPMaximum number of CPUs for request
processing2UnlimitedDefault/Maximum number of internal threads 10/1020/Unlimited
Syntax:
(dbeng7 | dbsrv7) [server-switches? [database-file [[database-switches?, ]
database-file specifies the path and filename to the database. You aren't actually required to specify a database file when you start up the database server, but if you don't, you must specify a name for the server using the -n switch. By default, if you do not specify a name for the database, it takes on the name of the database file, minus the path and extension. Similarly, if you do not specify a name for the database server (which you can do in server-switches), it takes on the name of the first database that was started on it.
For full details on the usage of dbeng7 and dbsrv7, see "The database server" in the Adaptive Server Anywhere Reference.
To start up the Adaptive Server Anywhere personal database server, but not a database, and name it !MyServer?, issue the following command at a prompt:
dbeng7 -n !MyServer?
To start up the Adaptive Server Anywhere personal database server and name it !MyServer?, then start a database on !MyServer? from mydb.db, naming it !MyDatabase?, issue the following command:
dbeng7 -n !MyServer? mydb.db -n !MyDatabase?
In the latter case, if you don't name the database server
There's a plethora of other switches available for the server. You can get a full listing of them by typing "dbeng7 -?" at a command prompt. A few important switches include the following:
****
Anywhere's cache size
**** ****
**** ****
to be used
**** ****
(explained below)
****----
Sometimes it's necessary for the server to run outside of the current session (that is, regardless of who, if anyone, is logged in). To do so, use the -ud switch at the command line when starting the server to run it as a daemon.
The following command would start up a database server as a daemon, using the database we created before:
dbsrv7 -ud -n !MyDatabase? mydb.db
NOTE: Using "8" to run the database server in the background does not work.
Assuming you have the appropriate authority, you can stop the database server using any of the following methods:
****
the dbstop command line utility
**** ****
using the STOP ENGINE SQL statement
**** ****
pressing the Q key when the server display window has the focus
****
NOTE: While the term engine is part of the SQL statement's name, server is the common term now used. This document will use the term server unless referring explicitly to the STOP ENGINE SQL statement.
By default, any user can stop a personal database server, but only a user with the DBA authority can stop a network database server. (This default can be changed by using the -gk switch when starting the server-see the Adaptive Server Anywhere Reference for details.)
The command line utility syntax is as follows:
dbstop [switches? {name}
If you are issuing dbstop to stop a locally-running server, you can simply specify the name of the database server in {name}. If the server is not running locally, you need to create a connection to the server before you can tell it to stop. The -c switch allows you to specify a connection string for the database running on the server that you would like to stop. To stop !MyServer?, execute the following command:
dbstop -c "uid=DBA;pwd=SQL;eng=!MyServer?;dbn=!MyDatabase?"
In this instance, you could also just give the server name, since the server is running locally:
dbstop !MyServer?
The first command connects to the database named !MyDatabase? on the server !MyServer?, then stops the server named !MyServer?. In the case that no databases are active on the server, you have to add "dbn=utility_db" to the connection string.
Let's say "Club" is the name of one of the databases running on a server named "Goliath," and you want to stop all the databases running on Goliath, including Club. The following command accomplishes that, as well as shutting down the database server:
dbstop -c "uid=DBA;pwd=SQL;eng=Goliath;dbn=Club"
If you have a database server named "David" running without any databases started on it, you can stop the server using the following command:
dbstop -c "uid=DBA;pwd=SQL;eng=David;dbn=utility_db"
The syntax for the STOP ENGINE statement is as follows:
STOP ENGINE [ server-name? [ UNCONDITIONALLY?
The server named server-name is stopped. If server-name is omitted, the currently running database server is stopped. If UNCONDITIONALLY is specified, the database server is stopped whether or not there are still connections to the server.
It's also possible to stop individual databases without stopping the server, or any of the other databases that might be running on it. To do so, use the STOP DATABASE SQL statement.
Syntax:
STOP DATABASE database-name [ON engine-name? [UNCONDITIONALLY?
You specify the name of the database that you would like to stop in database-name, with the restriction that the database specified cannot be the currently connected one. The "ON engine-name" clause can be used only in Interactive SQL. You use it to specify the server that the database is running on. Outside of Interactive SQL, the database can only be stopped if it is on the current server. The UNCONDITIONALLY keyword forces databases to be stopped, even if there are connections to it. By default, you can't stop a database if there are connections active.
You can connect to an Adaptive Server Anywhere database via any of the following interfaces:
****
ODBC
**** ****
OLE DB or ADO
**** ****
Embedded SQL
**** ****
Sybase Open Client
**** ****
JDBC
****
Regardless of how you connect, you must specify some parameters, such as a username and password, to establish a connection to the database. These can be specified in a connection string, the SQLCONNECT environment variable, an ODBC data source configuration, or the fields of a dialog box.
In this section, you'll find explanations on how to connect via SQL and ODBC.
As the Adaptive Server Anywhere network server is a client/server database, you may connect to a Linux-hosted database from Windows-based PCs and other non-Linux devices, as well as Linux applications. Programming interfaces such as OLE DB or ADO are available ony on Windows, but can still be used against a Linux-hosted database.
Connection strings are frequently used when performing actions on a database. They consist of a list of parameter settings, delimited by semicolons and enclosed in double quotes. There should be no extra spaces in a connection string.
Example:
"uid=DBA;pwd=SQL"
The short strings of letters just before each equal sign (in this example, uid, pwd, and dbf) are called keywords, which each correspond to a connection parameter. There are many connection parameters available, and they are listed in the Connecting to a Database chapter of the Adaptive Server Anywhere User's Guide. They are also described in detail in the Connection and Communication Parameters chapter of the Adaptive Server Anywhere Reference.
When Adaptive Server Anywhere utilities are looking for connection parameters, they check the SQLCONNECT environment variable for any parameters that were left out of the connection string. If you're putting connection parameters into the SQLCONNECT environment variable, replace the equal signs with number (#) signs. In bash you would use the following command:
SQLCONNECT='uid#DBA;pwd#SQL'
The single quotes are necessary in the above command because semicolons can be used to separate bash commands. You can also use double quotes.
To make SQLCONNECT available in subsequent shells, you'd need to use "export SQLCONNECT" to export the SQLCONNECT variable to the environment. You may also want to put these commands into your .bash_profile (or .profile, if you're using another shell) if you want the same connection parameters to be available each time you log in.
To connect to a database from Interactive SQL, go to the Command menu, and choose "Connect...", then fill in the dialog box as appropriate.
ODBC (which stands for Open Database Connectivity) is an industry-standard interface for connecting client applications to relational and non-relational DBMSes. When you create an ODBC data source, it encapsulates the data and any other information required to get the data, including connection parameters.
----4.5.3.1. Setting up ODBC with Adaptive Server Anywhere
To connect to Adaptive Server Anywhere from ODBC applications on Linux, you can either use Sybase's ODBC driver as a driver manager, or use a third-party ODBC driver manager such as iODBC or unixODBC. If you choose the latter route, follow the installation instructions for the driver manager you've chosen and choose dbodbc7.so (which resides in the sybase/SYBSsa7/lib directory) as the ODBC driver for Adaptive Server Anywhere.
If you choose the former route, you can use Adaptive Server Anywhere's ODBC driver as a driver manager if you will only be connecting to Adaptive Server Anywhere databases. To do so, you need to create a few symbolic links so that ODBC driver manager requests get routed to the Sybase ODBC driver. From the sybase/SYBSsa7/lib subdirectory, enter the following commands:
$ ln -s dbodbc7.so libodbc.so
$ ln -s dbodbc7.so libodbc.so.1
$ ln -s dbodbc7.so libodbcinst.so
$ ln -s dbodbc7.so libodbcinst.so.1
That's it!
----4.5.3.2. About ODBC data sources
Data sources exist on the client computer, with at least one for each database accessible via ODBC. They reside in the .odbc.ini file or in a separate .dsn file.
If the client computer is running Linux or another UNIX operating system, ODBC data sources can be used both for ODBC applications as well as for the Interactive SQL and Sybase Central utilities.
NOTE: The database server looks for .odbc.ini in the following locations, among several others:
***#
ODBCINI environment variable
***# ***#
ODBCHOME and HOME environment variables
***# ***#
The user's home directory
***# ***#
The current directory
***# ***#
The path
***# ***#
The root directory
***#
If no .odbc.ini file exists in your home directory, you'll have to create one in your home directory. You can check if one exists by using the command "ls -a /.odbc.ini".
You manage ODBC data sources using the dbdsn command line utility.
Syntax:
dbdsn [ modifier-switches? { -l | -d dsn | -g dsn | -w dsn [details-switches? | -cl }
dbdsn has four main modes of operation, and its behaviour depends on whether you choose the -l, -d, -g, or -w switch. Where applicable, the name of the data source to be operated on is specified by dsn.
****
the -l switch lists the data sources that have been defined
**** ****
the -d switch deletes the specified data source
**** ****
the -g switch gives you the details of the specified data source
**** ****
the -w switch creates a new DSN using parameters specified in details-switches
****
The most important details-switch is the -c switch, which allows you to specify the usual database connection parameters. You can also specify the name of a database server as a details-switch. Type "dbdsn -cl" to display a list of available connection parameters.
To create a new data source named MyNewDSN for the server
dbdsn -w MyNewDSN -c "uid=dba;pwd=sql;eng=!MyServer?"
If there is a data source named MyNewDSN already existing, dbdsn asks if you would like to overwrite it.
Conversely, to delete MyNewDSN, execute the following command:
dbdsn -d MyNewDSN
The modifier-switches control how dbdsn outputs its messages to screen, and whether or not data sources can be overwritten without confirmation. For more information on other dbdsn options, see "The Data Source utility" under the Database Administration Utilities chapter of the Adaptive Server Anywhere Reference.
----4.5.3.3. Connecting to an ODBC data source
Once you've created an ODBC data source, you can access it through the DSN (!DataSourceName?) connection string keyword.
For an ODBC data source called mydatasrc, for example, use the following connection string to connect to the database associated with it:
"dsn=mydatasrc"
NOTE: Explicitly-provided connection parameters and SQLCONNECT override any parameters provided in the ODBC data source, in that order.
NOTE: The FileDSN connection parameter is not yet available in version 7.0.2 of Adaptive Server Anywhere. Future versions of Adaptive Server Anywhere should support File DSNs.
Creating a backup of your data is a simple, essential component of any serious installation. Adaptive Server Anywhere includes utilities to help minimize data loss in case your data becomes corrupt as a result of media failure, power outage, or other failure.
Backups of Adaptive Server Anywhere databases can be performed through the dbbackup command line utility, SQL, or Sybase Central. Both full backups and incremental backups can be performed, and they can be performed either online or offline (that is, whether the server is running or not, respectively). In addition, backups can be performed both from the server side and from the client side.
A full backup makes copies of the main database file and the transaction log file. While it's the most basic and essential type of backup, it usually isn't practical to regularly perform full backups of large databases. As a result, incremental backups are commonly used.
An incremental backup makes a copy of the transaction log alone. It takes place as part of a cycle that begins with a full backup, which is then followed by a given number of incremental backups. Since only the transaction log is copied, an incremental backup uses less time and resources, making it particularly suited for large databases. Keep in mind, though, that the more time you leave between full backups, the greater the risk of losing data in the event that one of the transaction logs becomes unusable.
An online backup is performed without stopping the database server. It provides a consistent snapshot of the database, even as the database is modified. Online backups are useful for databases with high availability requirements, but they won't complete until all active transactions are complete.
In contrast, offline backups are performed once the database server has been shut down. They're useful for when the database can be taken down on a regular basis. You make offline backups simply by copying the pertinent files to another location using the cp command in a terminal window.
In either case, both full and incremental backups can be performed.
An online backup can be performed from a client using the dbbackup command line utility. This is known as a client-side backup, and it puts a backup of the database on the client machine.
An online backup can also be performed on the server by issuing the BACKUP statement in SQL. Server-side backups are generally faster, owing to the fact that client-side backups usually depend upon transport across networks.
The command line utility for making a backup of your database is dbbackup. Its syntax is as follows:
dbbackup [ switches? directory
directory specifies a destination directory for the backup files. Some useful switches include the following:
****
string to the database to be backed up
**** ****
**** ****
**** ****
and creates a new one. It is necessary for replication systems.
**** ****
and creates a new one. It should not be used in replication systems.
****
For example, if you were creating your first backup, you would want to create a full backup of !MyDatabase?. To put it in ./backups, use the following command:
dbbackup -c "uid=DBA;pwd=SQL;dbn=!MyDatabase?" ./backups
The next few backups could be incremental backups, so use the following:
dbbackup -t -r -c "uid=DBA;pwd=SQL;dbn=!MyDatabase?" ./backups
----5.1.4.2. From SQL
If you prefer to back up your database from Interactive SQL, the SQL statement is BACKUP DATABASE. You must have DBA authority to use BACKUP DATABASE, whose syntax is as follows:
BACKUP DATABASE DIRECTORY backup-directory [ WAIT BEFORE START? [ DBFILE ONLY? [ TRANSACTION LOG ONLY? [ TRANSACTION LOG RENAME [[ MATCH? ] [ TRANSACTION LOG TRUNCATE?----5.1.4.3. From Sybase Central
To make a backup from Sybase Central, open the Utilities folder under "Adaptive Server Anywhere 7" and double-click "Backup Database" to open a dialog box which will guide you through the backup process.
You should regularly use either Sybase Central, SQL, or the dbvalid command line utility to validate a backup of your database in read-only mode, and, if errors are found, make repairs against the original database. Never make changes to a backup database! To read more about validation, see "Validating a database" and "Validating a transaction log" under the Backup and Data Recovery chapter of the Adaptive Server Anywhere User's Guide.
Depending on the way your database and its backups are set up, and the status of your files after a media failure, there are several possible processes involved in how you go about recovering data. For information on how to recover data in various situations, see the Backup and Data Recovery chapter of the Adaptive Server Anywhere User's Guide.
All data in relational databases is held in tables. Each column is assigned a data type, and each row of a table holds a value for each column. The following are true for any table in a relational database:
****
There is no significance to the order of rows and columns.
**** ****
Each row contains exactly one value per column.
**** ****
All values in a column are of the same type.
****
Here are some things to keep in mind when designing your database:
****
give every table a primary key
**** ****
make sure that each table holds information about one specific entity
**** ****
foreign keys form the relationships between tables (and therefore entities)
****----
When you first create a database in Adaptive Server Anywhere, the only tables it contains are the system tables. To create tables to hold your data, use either the CREATE TABLE statement in SQL or the Sybase Central Table Editor. You must have the DBA or RESOURCE authority to create a table, and you must have the DBA authority make another user its owner.
The CREATE TABLE statement has an extremely broad range of options that are documented in the Adaptive Server Anywhere Reference, so only a small subset of options are described here. The basic syntax is as follows:
CREATE TABLE owner.table-name (column-name datatype [, column-name datatype?...)
The "owner." portion before tablename is optional, and is used by a user with the DBA authority to make another user the owner of the new table. table-name and column-name, respectively, are the names of the table and its columns. Insert the words PRIMARY KEY after datatype to make it the primary key.
See the SQL Data Types chapter of the Adaptive Server Anywhere Reference for a list of the types available and their characteristics.
To create a table named customer with columns id, name, address, city_state_zip, and phone, with id as the primary key, for example, use the following CREATE TABLE statement:
create table customer (id integer not null primary key, name char ( 35 ), address char ( 35 ), city_state_zip char ( 35 ), phone char ( 12 ) )
It's also important to add "not null" in the case of id, since it's the primary key.
To create a table in Sybase Central, connect to your database and open its Tables folder. If you double-click "Add Table," Sybase Central Table Editor will be opened and using the button bar, you can set up the table as you wish. Hover the mouse pointer over each button to find out what it does. Don't forget to make a primary key before you close the Table Editor!
Some table creation options documented in the Adaptive Server Anywhere Reference but not here that you might be interested in include automatic incrementation (often used on the primary key), constraints, and foreign keys.
You can make many kinds of changes to a table once it's been created. Some of the things you can do include the following:
****
rename a table
**** ****
add, remove, or rename columns
**** ****
change the datatype, default value, or length of a column
****
As with creating tables, you can alter them through SQL or Sybase Central. To alter a table in SQL, you use the ALTER TABLE statement. ALTER TABLE has a great variety of options, which are described in detail in the Adaptive Server Anywhere Reference. You'll see a few basic examples here just to get you started.
To rename the customer table to cust:
alter table customer rename cust
To add a company_name column to cust, with a maximum length of 35 characters:
alter table cust add (company_name char (35) )
To give company_name a default value of "n/a" :
alter table cust alter company_name set default 'n/a'----
NOTE: Before putting an Adaptive Server Anywhere database into serious usage, your first order of business as the database administrator (DBA) should be to change the DBA password from the default password, "SQL." For details on how to do this, see section 6.2.5.
This section describes the user IDs that are created for each database, briefly describes how to create new user IDs, and goes over some of the ways you can use user IDs to control outsiders access of data. For more information on user IDs, groups, and permissions, see the Managing User IDs and Permissions chapter of the Adaptive Server Anywhere User's Guide.
When Adaptive Server Anywhere databases are initialized, two groups and two user IDs are created. The two groups created are SYS and PUBLIC. The two user IDs created are DBA and dbo.
SYS is a user as well as a group, but no one can connect to the database using the user ID SYS. SYS owns the system tables and the system views, and only SYS can update the system tables.
PUBLIC is a member of the SYS group, and has only SELECT permissions on most system tables and system views. Since new user IDs are, by default, members of PUBLIC, you should revoke PUBLIC's membership in SYS if you want new users to have no permissions by default.
The DBA user can directly modify any part of an Adaptive Server Anywhere database except the system tables. This is why it's important to change the default DBA password from "SQL." You should be cautious when giving DBA authority to a user (see the DBA Authority section below). If a user needs DBA authority, s/he should be given DBA authority, rather than the DBA's password.
----6.2.1.2. Creating new user IDs
The SQL statement to add a new user ID is GRANT CONNECT.
Syntax:
GRANT CONNECT TO userid1 IDENTIFIED BY password1
To add a user ID with the name Mortimer, execute the following SQL statement:
grant connect to mortimer identified by monkey ----
This section explains permissions on tables that can be granted to users. Permissions are granted on a user-by-user basis.
There are a few different table permissions that can be granted to a user, and they are each granted separately.
****
SELECT allows the user to read data, and can be restricted to particular columns.
**** ****
INSERT allows the user to add data.
**** ****
UPDATE allows the user to change data, and can be restricted to particular columns.
**** ****
DELETE allows the user to remove data.
**** ****
ALTER allows the user to modify the structure of a table.
**** ****
REFERENCES allows the user to add indexes, primary keys, and foreign keys.
**** ****
ALL includes all the above permissions.
****
With the exceptions of ALTER and REFERENCES, which apply to tables exclusively, the table permissions apply to both tables and views. The SQL syntax for granting permissions is as follows:
GRANT lib/CachedMarkup.php (In template 'browse' < 'body' < 'html'):257: Error: Pure virtual lib/main.php:944: Notice: PageInfo: Cannot find action page lib/main.php:839: Notice: PageInfo: Unknown action lib/InlineParser.php:336: Warning: Invalid [] syntax ignored: [[ SELECT (column-name, ...) lib/CachedMarkup.php (In template 'browse' < 'body' < 'html'):257: Error: Pure virtual Fatal Error:
Fatal PhpWiki Error