Differences between version 2 and predecessor to the previous major change of HowToPrint2Win.
Other diffs: Previous Revision, Previous Author, or view the Annotated Edit History
| Newer page: | version 2 | Last edited on Sunday, November 28, 2004 1:01:41 am | by AristotlePagaltzis | Revert |
| Older page: | version 1 | Last edited on Friday, June 7, 2002 1:07:20 am | by perry | Revert |
@@ -1,226 +1 @@
-
-
-
-The Linux Print2Win mini-HOWTO
-
-
-
-----
-
-!!!The Linux Print2Win mini-HOWTO
-
-!!Marcelo Pereira da Silva, marcelo@pereira.comv1.1, Jan 2002
-
-
-----
-''This howto contains the general configuration to get linux printing to a
-Windows print share.''
-----
-
-
-
-
-!!1. Introdution
-
-
-
-
-!!2. Server (Windows)
-
-
-
-
-!!3. Client (Linux)
-
-
-*3.1 Standard lpr
-
-
-
-
-
-!!4. /etc/printcap TIPS
-
-
-
-
-!!5. License
-
-
-
-
-!!6. Credits
-----
-
-!!1. Introdution
-
-
-As we want the print service running, let set up all the environment step
-by step, to avoid mistakes or bad configurations.
-
-
-First, set up the server, so when you have the server running, go to the
-clients and configure them.
-
-
-
-----
-
-!!2. Server (Windows)
-
-
-
-There is no special rules when configurating the server. Just install the
-printer driver in the Windows server, test it to certificate the printer
-is running properly, so share the printer.
-
-
-
-----
-
-!!3. Client (Linux)
-
-
-The setup of the client is almost the same when you are setting up the
-printcap to print linux to linux, with some changes.
-
-
-
-
-!!3.1 Standard lpr
-
-
-
-
-
-
-The simplest way to do it is adding an entry in /etc/printcap.
-As a quick example, the entry for a generic matricial printer would be:
-
-
-# EPSON LX300
-epson:\
-:sd=/var/spool/lpd/epson:\
-:mx#:\
-:sh:\
-:if=/var/spool/lpd/epson/filter:\
-:lp=/dev/null:
-
-
-
-
-* Make sure you are using the correct filter, or the right generic one.
-
-
-Be sure you have created the directory /var/spool/lpd/epson,
-and the users you wish to use the printer have the right access to this.
-
-
-For example, let the Windows Print Server be called by meriadoc,
-it IP=192.168.1.49 and the printer (at Windows) are shared as
-epsonLX.
-
-
-So, you have to configure /var/spool/lpd/epson/.config like this:
-
-
-share='\\meriadoc\epsonLX'
-hostip=192.168.1.49
-
-
-Where:
-
-
-*share='\\windows-print-server-name\print-share-name'
-*
-
-*hostip=windows-print-server-IP
-*
-
-
-
-Once your /etc/printcap is configured, you have to enable the
-print share:
-
-
-[localhost
]$ lpc up epson
-[[localhost]$ lpc enable epson
-
-
-If everything is ok, you can send jobs to the queue:
-
-
-[[localhost]$ lpr -Pepson <file>
-
-
-
-
-
-----
-
-!!4. /etc/printcap TIPS
-
-
-I have used the entry below in the first example, but this is not a
-particularly good idea:
-
-
-...
-:lp=/dev/null:\
-
-
-Because lpr does an `exclusive' open on the file you specify as lp=.
-It does this in order to prevent multiple processes from trying to
-print to the dame printer at the same time.
-
-
-The side effect of this is that in your case, eng and colour can't print at
-the same time, (usually more or less transparent since they probably print
-quickly and since they queue you probably don't notice) but any other process
-that tries to write to /dev/null will break!
-
-
-On a single user system, probably not a big problem. I have a system with
-over 50 printers. It would be a problem there.
-
-
-The solution is to create a dummy printer for each. Eg: touch /dev/eng.
-
-
-
-
-
-[[localhost]$ touch /dev/eng
-[[localhost]$ touch /dev/colour
-
-
-
-
-
-----
-
-!!5. License
-
-
-This document, Print2Win-HOWTO,
-is copyrighted (c) 2001-2002 by Marcelo Pereira da Silva.
-Permission is granted to copy, distribute and/or modify this
-document under the terms of the GNU Free Documentation License,
-Version 1.1 or any later version published by the Free Software
-Foundation; with no Invariant Sections, with no Front-Cover Texts,
-and with no Back-Cover Texts. A copy of the license
-is available at
-http://www.gnu.org/copyleft/fdl.html.
-
-
-
-----
-
-!!6. Credits
-
-
-Thanks to all those who sent opinions about this document, to everybody
-who told me some printing tips, to Rick Bressler, and a special thanks
-to Harish Pillay, whose I don't know, but wrote the first version of
-this document
.
-----
+Describe
[HowToPrint2Win
] here
.
