This page lists people's benchmarks for HardDisk performance, so you can see if your Hardware/OperatingSystem setup is adequate or not. Feel free to add your benchmarks here.
We prefer to use bonnie++ for benchmarking "real-world" harddisk performance. hdparm just doesn't cut it.
Here's our preferred bonnie++ command line:
/usr/sbin/bonnie++ -r <ramsize> -s <twice ramsize> -x 1
Some documentation suggests that you should use about 40 times the ramsize in your -s parameter, as opposed to 2 times the ramsize. This will obviously take longer, but should sidestep any cache improvements you might see which could influence your results. If you change your bonnie++ command line please make a note of it
If bonnie++ returns comma-separated output instead of a nicely formatted table as shown below, simply pass the comma separated output through
bon_csv2txt
which should have been bundled with bonnie++.
Please make a note of your system specification, in particular the disk IO subsystem, which OS, and which version of bonnie++ you are running.
Name: Imperial
OS: FreeBSD 6-CURRENT (2005-06-04)
Bonnie++ Ver: 1.93c
Hardware: Pentium4 3.4GHz, 1 GB RAM
Disk System: Areca ARC-1110, 4x 250Gig SATAII NCQ Hitachi DeathStars, RAID5
Filesystem tested: UFS2
Results:
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
imperial 2G 325 99 105753 25 48346 13 655 88 169307 24 260.3 6
Latency 27605us 572ms 599ms 464ms 20064us 76681us
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
imperial 16 +++++ +++ +++++ +++ +++++ +++ 25373 63 +++++ +++ +++++ +++
Latency 31605us 43us 340us 168ms 88us 47us
Name: Wildfire
OS: Gentoo 2004.2 Linux 2.6.7
Bonnie++ Ver: 1.93c
Hardware: Dual Opteron 244 (1.8Ghz), 2 GB RAM
Disk System: 3ware 9500S-8, 8x 160Gig SATA Hitachi DeathStars, RAID5
Filesystem tested: XFS
Results:
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
wildfire 4G 370 72 69352 15 59323 14 921 98 151440 16 419.6 3
Latency 19378us 10868ms 293ms 22041us 21552us 3350ms
Version 1.93c ------Sequential Create------ --------Random Create--------
wildfire -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 7288 41 +++++ +++ 4253 18 3500 20 +++++ +++ 4135 20
Latency 123ms 114us 976ms 859ms 11us 1208ms
Name: mower
OS: Linux (2.4.26)
Bonnie++ Ver: 1.02b
Hardware: 2x 3.2GHz P4 Xeon, 1GB DDR266 DRAM
Disk System: 3ware Escalade 950x, Maxtor 120GB
Filesystem tested: xfs
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
mower 4G 30819 99 391271 96 116571 34 32539 95 266666 40 245.3 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 14433 90 +++++ +++ 14438 88 13713 90 +++++ +++ 12786 94
Name: taz
OS: FreeBSD (5.1)
Bonnie++ Ver: 1.93c
Hardware: 2x 333Mhz P2 Xeon, 512mb EDO Ram
Disk System: Adaptec aic7880 Ultra SCSI adapter, 1x 9gig SEAGATE ST19171W
Filesystem tested: ufs
Results:
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
tax 256M 13 99 9961 49 4888 26 32 99 10461 28 116.8 25
Latency 748ms 105ms 414ms 273ms 24509us 3980ms
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
taz 16 1548 69 5114 89 4716 99 1368 56 5978 96 3209 62
Latency 1446ms 37182us 1163us 1618ms 60666us 1293ms
Name: hp
OS: FreeBSD (4.9)
Bonnie++ Ver: 1.02c
Hardware: 2x 1Ghz P3 Xeon, 768 Mb ECC Registered SDRam
Disk System: Adaptec 2 Port RAID Controller, 2x 18gig Haitachi SCSI 10000rpm in RAID 1
Filesystem tested: ufs
Results:
Version 1.02c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
hp.iplay.net. 1536M 4984 12 5117 3 3213 2 21541 67 28572 13 304.6 2
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
hp.iplay.net.nz 16 4172 18 +++++ +++ 27020 100 26410 99 +++++ +++ 23056 99
Name: kiakaha
OS: Debian Woody (3.0), Kernel 2.6.4
Bonnie++ Ver: 1.02b
Hardware: 2x1 GHz P3, 1.5 GB ECC Registered SDRam
Disk System: 3ware 8506 4-port SATA Controller, 4 120GB Seagate 7200rpm SATA disks in RAID-5
Filesystem tested: ext3
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
kiakaha 3G 12160 91 12370 11 8996 9 11583 79 64704 31 162.2 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
kiakaha 16 606 98 +++++ +++ +++++ +++ 624 97 +++++ +++ 2327 97
Name: hydrogen
OS: Debian Woody (3.), Kernel 2.4.24
Bonnie++ Ver: 1.02b
Hardware: P3-600, 512 MB ram
Disk System: Software Raid 1, 2x20 GB IDE disks (7200rpm)
Filesystem tested: ext3
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
hydrogen 1G 7435 93 8265 8 4182 3 5803 67 14261 5 80.4 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
hydrogen 16 388 89 +++++ +++ +++++ +++ 401 91 +++++ +++ 933 48
Name: mick's machine
OS: Debian Woody (3.), Kernel 2.4.24
Bonnie++ Ver: 1.02b
Hardware: P4 Xeon 2.8GHz with HT, 512MB RAM
Disk System: Hardware RAID5, 3 x 18GB 15krpm SCSI, LSI Logic RAID controller
Filesystem tested: ext3
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
db 1G 15651 55 17031 10 8113 2 19649 60 85623 15 492.7 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
db 16 2324 92 +++++ +++ +++++ +++ 2524 87 +++++ +++ 6100 100
Name: mick's other machine
OS: Debian Woody (3.), Kernel 2.4.23
Bonnie++ Ver: 1.02b
Hardware: Dual P3 550, 256MB RAM
Disk System: Hardware RAID1, 2 x 9GB SCSI, unknown SCSI/RAID controller
Filesystem tested: ext3
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
xw 512M 6409 98 13809 24 5123 7 5959 81 11593 7 164.8 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
xw 16 393 96 +++++ +++ 19582 99 407 97 +++++ +++ 1826 92
Name: argon
OS: Redhat 9.0 (XD2), Kernel 2.6.3
Bonnie++ Ver: 1.03a
Hardware: Gigabyte GA7N (nForce2 Chipset), Athlon XP2600+, 1GB DDR
Disk System: Onboard ATA133 Controller, Single Maxtor 120GB 7200rpm 8MB Cache ATA133
Filesystem tested: ext3
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
argon.shr.crc.ne 2G 11972 88 44732 19 17053 6 18004 72 43860 7 159.9 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
argon.shr.crc.ne 16 1495 96 +++++ +++ +++++ +++ 1720 96 +++++ +++ 4834 96
Name: hendrix (JohnMcPherson's router)
OS: Debian Woody, Kernel 2.4.21
Bonnie++ Ver: 1.02b
Hardware: Celeron 500, 192MB RAM
Disk System: IDE 1x Western Digital 40GB WD400LB-00DNA0
Filesystem tested: ext3
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
hendrix 384M 6631 98 19901 28 11270 15 6577 90 25629 14 161.8 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
hendrix 16 311 99 +++++ +++ 31358 93 310 99 +++++ +++ 1184 96
Name: vegas
OS: FreeBSD 5.2.1-RELEASE-p2
Bonnie++ Ver: 1.93c
Hardware: Dual Pentium 2 400MHz, 192MB RAM
Disk System: Qlogic ISP 1020/1040 PCI SCSI Adapter with DEC 4110 Fixed Direct Access SCSI-2 device (4GB)
Filesystem tested: ufs2 with soft-updates enabled
Results:
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
vegas 384M 23 99 9950 28 4420 13 60 99 9867 15 84.6 10
Latency 368ms 168ms 727ms 145ms 72345us 8722ms
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
vegas 16 2653 60 9178 97 7758 99 2614 60 9718 89 8666 99
Latency 694ms 14508us 3217us 704ms 129ms 491us
Name: Feet
OS: RedHat9
Bonnie++ Ver: 1.03
Hardware: P3 500 512 MB ram
Disk System: Various IDE drives
Filesystem tested: ext3
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
Fluffy 1G 2985 88 13323 24 6988 11 3271 88 20180 10 87.1 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
Fluffy 16 426 95 +++++ +++ 26110 98 408 91 +++++ +++ 1490 80
Name: Aladdin
OS: FreeBSD 4.9p2
Bonnie++ Ver: 1.03
Hardware: Dual P4 Xeon 2.8Ghz, 2GB ECC Registered DDR-RAM
Disk System: 3ware 7506 8-port ATA Controller, 8x 120Gig Seagate 7200rpm 8MB ATA in RAID5
Filesystem tested: UFS w/ SoftUpdates
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
aladdin.open2vie 4G 57959 54 58722 19 29265 9 68440 69 76360 17 422.8 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
aladdin.open2vie 16 28094 79 +++++ +++ +++++ +++ +++++ +++ +++++ +++ 27205 89
Name: yeates
OS: Debian Woody
Bonnie++ Ver: 1.02b
Hardware: i686 2.66GHz
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
oucs-yeates 1000M 29288 92 70502 18 15066 3 23962 73 37280 3 288.0 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
oucs-yeates 16 4939 92 +++++ +++ +++++ +++ 4803 93 +++++ +++ 11666 98
Name: lounge
OS: Fedora Core 2 test 2
Bonnie++ Ver: 1.03a
Hardware: Celeron 1200, VIA motherboard
Disk System: 1 x Maxtor 40gb
Filesystem tested: ext3
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
localhost.loca 384M 12704 78 17682 25 3755 4 15492 78 30585 16 83.3 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
localhost.locald 16 17707 97 +++++ +++ 26296 99 18441 99 +++++ +++ 24749 99
Name: mick using write-back caching
OS: Debian Woody (3.), Kernel 2.4.24
Bonnie++ Ver: 1.02b
Hardware: P4 Xeon 2.8GHz with HT, 512MB RAM
Disk System: Hardware RAID5, 3 x 18GB 15krpm SCSI, Dell PERC4/SC RAID Controller
Filesystem tested: ext3
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
db 1G 27248 98 44860 26 15045 5 12881 40 31487 5 415.7 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
db 16 2042 71 +++++ +++ +++++ +++ 2766 99 +++++ +++ 6049 99
Name:deuterium
OS:gentoo
Bonnie++ Ver:1.02b
Hardware: P4 2.8C Northwood, 1024 MB DDR400 RAM, Intel D865GLC Motherboard
Disk System: Seagate 7200 Rpm SATA, Software RAID1, Linux 2.6.5
Filesystem tested: ext3
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
deuterium 2G 26649 99 55449 22 22114 5 25342 81 54689 5 279.0 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 2875 99 +++++ +++ +++++ +++ 2870 99 +++++ +++ 7425 100
Name:NgcCompound
OS:Gentoo Linux Kernel: 2.6.7-ck5
Bonnie++ Ver:1.03
Hardware: Mainboard Gigabyte GA-6VTXDR-C, Dual Pentium3 866, 512MB PC133 SDram
Disk System:2X80 GB Hitachi ide100 hard drives in sw linux raid0
Filesystem tested:ext3 with acl support
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
smb-01 1G 9876 99 68780 90 22787 22 11227 98 62270 24 364.6 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
smb-01 16 620 99 +++++ +++ 31576 100 607 99 +++++ +++ 2171 98
Name: (no name yet)
OS: Knoppix 3.6 (32-bit) Debian GNU/Linux, kernel 2.6.7
Bonnie++ Ver: 1.03
Hardware: Athlon 64 3500+ (S939), Mainboard MSI Neo2 Platinum, 2GB PC3200 SDRAM
Disk System: 4x 250GB Hitachi SATA drives, software RAID-5 (Linux), 64k chunksize
Filesystem tested: SGI XFS
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
4G 41915 81 103081 26 26515 8 36760 78 153431 28 532.2
0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 954 7 +++++ +++ 682 4 1006 7 +++++ +++ 677 5
Name: exus 1
OS: Gentoo 2004.2 Kernel: 2.6.9
Bonnie++ Ver: 1.93c
Hardware: Dual Opteron 242 (1.6Ghz), 4G RAM
Disk System: Adaptec AIC7902 Ultra320, 3 x SCSI 36G 15k Seagate Cheetah
Filesystem tested: reiserfs
Results:
No Raid, just 1 x SCSI 36G 15k
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
f11 8G 245 99 43261 17 23733 8 1059 98 51610 9 355.6 17
Latency 46238us 21642ms 5595ms 35182us 81208us 1674ms
Version 1.93c ------Sequential Create------ --------Random Create--------
f11 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 15849 71 +++++ +++ 20028 99 19222 88 +++++ +++ 17690 99
Latency 100us 1060us 1115us 96us 14us 157us
Software Raid1 (evms), 2 x SCSI 36G 15k
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
f11 8G 296 99 57401 23 31140 10 888 84 69731 13 551.7 28
Latency 37145us 40706ms 1215ms 56261us 93306us 1556ms
Version 1.93c ------Sequential Create------ --------Random Create--------
f11 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 15357 70 +++++ +++ 18733 92 19144 86 +++++ +++ 16890 92
Latency 133us 1019us 1111us 159us 13us 6980us
Software Raid5 (evms), 3x SCSI 36G 15k
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
f11 8G 315 98 59570 22 25203 10 1043 99 82804 19 379.6 20
Latency 30410us 1661ms 253ms 17986us 279ms 1530ms
Version 1.93c ------Sequential Create------ --------Random Create--------
f11 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 17219 75 +++++ +++ 20239 96 20390 91 +++++ +++ 16444 87
Latency 119us 1094us 1160us 114us 11us 99775us
Software Raid0 (evms), 3x SCSI 36G 15k
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
f11 8G 244 99 151268 63 42764 14 998 99 117044 22 682.4 38
Latency 46137us 698ms 126ms 17858us 15943us 573ms
Version 1.93c ------Sequential Create------ --------Random Create--------
f11 -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 19768 87 +++++ +++ 20593 99 21329 97 +++++ +++ 17788 99
Latency 100us 1130us 1183us 6743us 13us 154us
Name:monster
OS:SuSE Linux Professional 9.2 x86, Linux 2.6.8-24-bigsmp patched for sata hw and s.m.a.r.t. support
Bonnie++ Ver:1.01d
Hardware:Dual Xeon 2.4GHz FSB400 HT, 2GB ECC reg. DDR200, Asus PR-DLS ServerWorks? chipset
Disk System:4xMaxtor 200GB SATA, Promise SATAII 150TX4, Linux SW-RAID5
Filesystem tested: reiserfs
Results:standard options under system load
Version 1.01d ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
monster 4G 36630 58 48494 38 20734 19 51909 55 75551 38 277.2 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 18105 99 +++++ +++ 15924 99 15670 100 +++++ +++ 12276 89
Disk System:2xMaxtor 120GB PATA 2MB, OnBoard? ServerWorks? ATA100, Linux SW-RAID1
Filesystem tested: reiserfs
Results:standard options under system load
Version 1.01d ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
monster 4G 16159 24 18452 11 11748 5 31143 26 35436 9 213.3 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 16242 97 +++++ +++ 11530 94 15882 98 +++++ +++ 12898 100
Name: Boxy's broken firewall
OS: Ubuntu Hoary
Bonnie++ Ver: 1.03
Hardware: IBM NetVista? P4 2Ghz
Disk System: Single IDE Maxtor 2F020L0
Filesystem tested: EXT3
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
firewall 512M 25941 87 28841 11 12638 4 26871 84 30475 3 113.4 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
firewall 16 2416 99 +++++ +++ +++++ +++ 2476 98 +++++ +++ 7896 98
Name: mick's new proxy
OS: Debian sarge
Bonnie++ Ver: 1.03
Hardware: Dell PE800 P4 2.8GHZ w/ HT
Disk System: 3x160GB SATA in RAID5 w/ Adaptec 2610SA SATA RAID controller and no write caching
Filesystem tested: EXT3
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
sdn2 1G 8063 29 8603 1 4818 0 19406 66 55393 4 349.9 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
sdn2 16 2951 92 +++++ +++ +++++ +++ 3062 93 +++++ +++ 10663 76
Disk System: 3x160GB SATA in RAID0 w/ Adaptec 2610SA SATA RAID controller
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
sdn2 1G 26196 99 76630 13 26621 4 20188 69 60647 3 431.7 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
sdn2 16 3114 99 +++++ +++ +++++ +++ 3223 99 +++++ +++ 14067 100
Disk System: 3x160GB SATA in RAID5 w/ Adaptec 2610SA SATA RAID controller and write caching on
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
sdn2 1G 16990 64 37556 6 18631 3 19126 67 54448 3 396.4 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
sdn2 16 3002 95 +++++ +++ +++++ +++ 3239 99 +++++ +++ 14335 100
Disk System: 4x160GB SATA in RAID10 w/ Adaptec 2610SA SATA RAID controller and write caching on
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
sdn2 1G 25897 98 34616 6 19068 3 18927 66 49067 3 525.5 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
sdn2 16 3137 98 +++++ +++ +++++ +++ 3210 98 +++++ +++ 13990 99
Disk System: 4x160GB SATA in RAID5 w/ Adaptec 2610SA SATA RAID controller and write caching on
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
sdn2 1G 16371 61 40002 6 16626 2 19576 66 45534 2 422.8 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
sdn2 16 3050 97 +++++ +++ +++++ +++ 3247 99 +++++ +++ 13654 95
Disk System: 4x160GB SATA in RAID5 w/ 3ware 9500S-4LP
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
sdn2 1G 38058 95 73011 15 22948 4 26842 63 60612 4 395.8 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
sdn2 16 2938 99 +++++ +++ +++++ +++ 2953 98 +++++ +++ 12190 99
Disk System: 4x160GB SATA in RAID10 w/ 3ware 9500S-4LP
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
sdn2 1G 37884 95 120827 26 39796 7 31272 73 92781 6 351.8 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
sdn2 16 2948 99 +++++ +++ +++++ +++ 2966 99 +++++ +++ 12033 98
Name: Unnamed Sunfire V20z evaluation system
OS: Debian sarge (kernel-image-2.4.27-2-686-smp)
Bonnie++ Ver: 1.03
Hardware: Sunfire V20z dual Opteron 248 (2.2GHz), 2GB RAM
Disk System: QLogic dual port 2Gbps fibre-channel HBA (QLA2342), 12x 72GB 15k Fujitsu, software RAID-0
Filesystem tested: XFS
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
test 4G 23757 99 290516 55 174580 49 31150 100 365623 64 1458.6 2
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
test 16 4863 29 +++++ +++ 5392 24 6014 37 +++++ +++ 3730 24
There disks were dual-loop capable, and were accessible via either FC port. So, 6 disks were accessed via port 1, and the other 6 via port 2.
For reference, here is a single disk benchmark (XFS):
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
test 4G 23773 100 59000 11 32278 8 26353 84 76729 10 582.5 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
test 16 2821 12 +++++ +++ 4739 27 2692 15 +++++ +++ 274 1
Name: spectre
OS: Debian 3.1 (sarge), Linux 2.6.14.3
Bonnie++ Ver: 1.03
Hardware: Dual AMD 265 Dual Core Opterons, 2GB RAM, Tyan S2882 Motherboard
Disk System: Dual Seagate 7200.9 160GB SATA disks, NForce Pro SATA-II Controller
Filesystem tested: ext3
Results:
Linux SW-RAID-0
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
spectre 4G 37024 99 125071 46 47623 12 32857 82 118564 15 321.3 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
spectre 16 2491 99 +++++ +++ +++++ +++ 2443 99 +++++ +++ 8904 100
Linux SW-RAID-1
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
spectre 4G 36940 97 63884 23 29537 7 24679 60 68429 8 340.0 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
spectre 16 2803 99 +++++ +++ +++++ +++ 2921 99 +++++ +++ 9288 100
Name: WAND Opteron
OS: Gentoo 2004.2 Linux 2.6.7
Bonnie++ Ver: 1.93c
Hardware: Dual Opteron 246 (2 GHz), 5 GB RAM
Disk System: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320, 73 GB 10k RPM U320 SCSI IBM
Filesystem tested: ext3
Results:
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
Concurrency 1 -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
optitron.crc.ne 10G 411 99 47068 19 24934 8 1290 97 60829 9 271.5 7
Latency 20584us 1405ms 616ms 27498us 62201us 877ms
Version 1.93c ------Sequential Create------ --------Random Create--------
optitron.crc.net.nz -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 2388 91 +++++ +++ +++++ +++ 2551 96 +++++ +++ 8456 92
Latency 58584us 25us 46us 74571us 10us 307us
Name: shuttle
OS: FedoraCore 1, Kernel 2.4.22
Bonnie++ Ver: 1.03
Hardware: 2,4GHz P4, 512 MB ram
Disk System: Seagate 7200 RPM 80 GB disk, ICH4 controller
Filesystem tested: ext3
Results:
Bonnie commandline: bonnie++ -r 512 -s 1G -x1
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
dhcp-231.element 1G 32638 96 43900 11 20691 4 23407 62 46122 4 174.6 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
dhcp-231.element 16 2904 96 +++++ +++ +++++ +++ 3043 97 +++++ +++ 10142 100
Bonnie commandline: bonnie++ -r 512 -s 20G -x1
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
dhcp-231.elemen 20G 32387 96 38438 10 20167 5 24458 66 44323 4 86.7 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
dhcp-231.element 16 2939 96 +++++ +++ +++++ +++ 3043 98 +++++ +++ 9756 100
Name: chasm
OS: Debian Sarge (3.1), Kernel 2.6.11.12
Bonnie++ Ver: 1.03
Hardware: 2x Athlon 1800+ MP, 2 GB Registered ECC DDR
Disk System: 3ware 9508, 8x Seagate 400 GB 7200.8
Filesystem test: ext3
Bonnie commandline: bonnie++ -r 2048 -s 4096
IO Scheduler used: anticipatory (default)
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
chasm 4G 26155 99 61986 47 33331 20 24208 85 146446 50 400.0 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 874 78 +++++ +++ +++++ +++ 867 79 +++++ +++ 2638 99
IO Scheduler used: deadline
Bonnie commandline: bonnie++ -r 2048 -s 4096
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
chasm-deadline 4G 25373 99 75196 59 33644 20 24325 86 139905 48 564.5 2
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 864 82 +++++ +++ +++++ +++ 674 83 +++++ +++ 2579 98
Note: we tested different IO Schedulers above. It's not instantly obvious that the different results are a direct relation to the different IO schedulers however.
Maxtor Atlas 10k4 73GB U320 on LSI 20320-R PCI-X U320 SCSI Controller
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
chasm 4G 23890 90 26554 22 13772 9 21731 78 36772 16 330.2 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
chasm 16 13982 99 +++++ +++ 11499 99 14007 99 +++++ +++ 9767 95
Quantum Atlas 10k 9GB U160 on LSI 20320-R PCI-X U320 SCSI Controller (Note, due to lack of space this was tested with only 1G of data (1/2 of RAM)
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
chasm 1G 22087 87 24842 17 20906 10 28535 99 379878 99 +++++ +++
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
chasm 16 1143 98 +++++ +++ +++++ +++ 1367 98 +++++ +++ 2700 98
Name: old_chasm
OS: Debian Woody (3.0), Kernel 2.4.22
Bonnie++ Ver: 1.02b
Hardware: 2x750Mhz P3, 1GB RDRAM
Disk System: Err. /home. Which is NFS mounted off another machine (which has a SATA RAID5 config like kiakaha above)
Filesystem tested: ext3
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
chasm 2G 8787 90 11793 14 6211 12 9228 95 27751 23 362.4 4
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
chasm 16 486 3 2609 13 1213 6 512 3 2462 7 719 3
Disk System: Adaptec U80 SCSI, RAID5
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
chasm 2G 9023 90 27152 18 12002 11 10005 95 52934 32 117.1 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
chasm 16 733 99 +++++ +++ +++++ +++ 673 99 +++++ +++ 2334 99
Disk System: Adaptec U160 SCSI, Maxtor Atlas 10k4 73 GB
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
chasm 2G 9225 98 36982 54 18802 17 9534 91 41631 23 218.3 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
chasm 16 9620 100 +++++ +++ 7761 99 8631 95 +++++ +++ 6950 100
Name:wand NAS
OS:Debian Woody
Bonnie++ Ver:1.02b
Hardware:P4 2.8C Northwood, 512 MB DDR400, Intel D865GLC Motherboard
Disk System:3ware 7500 8 port PATA RAID5, 8 Hitachi 7K250 200GB 7200 rpm PATA disks
Filesystem tested:ext3
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
nas 1G 24867 81 24311 12 22053 7 33078 97 117722 17 429.3 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
nas 16 3093 98 +++++ +++ +++++ +++ 3100 97 +++++ +++ 7519 93
Name:wand-pma
OS:Debian Woody (3.0) Linux 2.4.27
Bonnie++ Ver: 1.02b
Hardware: P4 3.0E Prescott, 512 MB DDR400, Intel D865GLC Motherboard
Disk System: 400GB Hitachi SATA (Intel ICH5 SATA controller)
Filesystem tested: ext2
Results:
Version 1.02b ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
wand-pma 1G 35798 97 73241 10 20698 3 32340 87 61641 5 242.3 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 1943 39 +++++ +++ 19720 9 5093 100 +++++ +++ 17552 99
Name:voodoo-iii
OS:Gentoo 2004.3, Kernel 2.6.9
Bonnie++ Ver: 1.93c
Hardware:Dual Opteron 250, 4GB RAM
Disk System:4 x WD 250GB SATA RE, 3ware 9500S-4LP, 128Mb Cache, RAID 10
Filesystem tested: ext3
Results:
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
voodoo-iii 8G 375 99 72371 23 41091 11 1436 99 100341 10 384.5 7
Latency 36875us 19857ms 575ms 16495us 26128us 229ms
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
voodoo-iii 16 2977 98 +++++ +++ +++++ +++ 3030 98 +++++ +++ 10005 91
Latency 35474us 23us 82us 29747us 35us 1557us
Name:voodoo
OS:Debian Sarge (3.1), Linux 2.6.14.4
Bonnie++ Ver: 1.03
Hardware:Dual Opteron 250, 4GB RAM
Filesystem tested: ext3
Results:
Disk System:4 x WD 250GB SATA RE, 3ware 9550SX-4LP, 128Mb Cache, RAID 10
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
voodoo 8G 41864 90 101562 39 47233 10 43374 78 103847 11 359.4 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
voodoo 16 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++
Disk System:2 x Seagate 120GB SATA 7200.7, 3ware 8506-4LP, RAID 1
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
voodoo 8G 38090 80 42288 14 19971 4 29117 54 46759 4 276.5 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
voodoo 16 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++
Disk System:2 x Seagate 120GB SATA 7200.7, 3ware 8506-4LP, RAID 0
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
voodoo 8G 49626 97 77884 25 24914 5 28388 52 64337 9 185.4 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
voodoo 16 26245 96 +++++ +++ 23449 96 25573 98 +++++ +++ 21350 99
Disk System:2 x Seagate 120GB SATA 7200.7, 3ware 9500S-4LP, 128MB Cache, RAID 1
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
voodoo 8G 36854 76 44511 15 21081 4 28855 54 47809 4 271.8 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
voodoo 16 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++
Disk System:2 x Seagate 120GB SATA 7200.7, 3ware 9500S-4LP, 128MB Cache, RAID 0
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
voodoo 8G 49617 97 72396 23 25820 6 28062 54 57591 7 235.2 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
voodoo 16 25556 93 +++++ +++ 22003 96 23440 89 +++++ +++ 20893 97
Name: scribe
OS: Debian Sarge (3.1), Linux 2.6.14.4
Bonnie++ Ver: 1.03
Hardware: P4 1.8GHz, Asus 845 motherboard, 512MB Ram
Disk System: 4 x 500GB Seagate 7200.9, 3ware 8506-4LP Controller, RAID 5
Filesystem tested: ext3
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
scribe 4G 19754 81 18732 6 11195 3 22035 83 55306 7 176.9 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
scribe 16 2093 94 +++++ +++ +++++ +++ 2184 97 +++++ +++ 7376 97
Name: backup
OS: Fedora Core 4 (2.6.14-1.1653, elevator=deadline)
Bonnie++ Ver: 1.03
Hardware: Opteron 1x244, Arima HDAMA MB, 1GB RAM
Disk System: ARC-1110 (128MB writeback cache), 4xMaxtor 300GB SATA (16MB buffer, NCQ), RAID5
Results:
Filesystem: ext2
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
backup.talisys.c 2G 52808 96 205247 35 57659 11 50046 87 183693 19 607.7 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 4961 99 +++++ +++ +++++ +++ 5036 99 +++++ +++ 17334 99
Filesystem: ext3
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
backup.talisys.c 2G 33804 68 150078 54 53045 12 48234 91 180696 21 602.2 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 2333 99 +++++ +++ +++++ +++ 2543 99 +++++ +++ 9283 100
Filesystem: reiserfs
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
backup.talisys.c 2G 52846 96 198069 54 67564 16 49182 84 189264 21 620.4 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 26945 99 +++++ +++ 24314 100 26805 100 +++++ +++ 22665 100
Filesystem: xfs
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
backup.talisys.c 2G 51803 96 208008 38 67126 14 51718 91 168611 16 571.8 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 14150 71 +++++ +++ 9801 45 10042 53 +++++ +++ 8224 41
Filesystem: jfs
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
backup.talisys.c 2G 49989 92 193058 36 60365 10 50831 88 187681 17 572.4 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
16 +++++ +++ +++++ +++ 27860 70 13445 82 +++++ +++ 12000 50
Name:ikker
OS:FreeBSD 6.2-PRERELEASE
Bonnie++ Ver:1.93c
Hardware:2xPIII 1.26Ghz Supermicro P3TDER 2Gb RAM
Disk System:4xMaxtor 6Y080P0 3Ware 7506-4 Controller RAID 0 256K stripe
Filesystem tested:UFS2 (32K blocks 4K fragments)
Results:
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
ikker.markir.net 4G 118 99 150517 95 21685 19 283 99 166122 84 299.8 29
Latency 71914us 97403us 284ms 46098us 97402us 769ms
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
ikker.markir.net 16 13059 79 +++++ +++ 18485 97 10684 90 +++++ +++ 10870 96
Latency 26796us 106us 967us 304ms 418us 9238us
Name:istral
OS:Linux 2.6.17 (Gentoo 2006.1 kernel 2.6.17-gentoo-r7)
Bonnie++ Ver:1.93c
Hardware:2xPIII 1.26Ghz Supermicro P3TDER 2Gb RAM
Disk System:4xMaxtor 6E040L0 Promise TX4000 Controller Software RAID 0 256K stripe
Filesystem tested:XFS
Results:
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
istral 5096M 340 99 84140 55 57605 43 763 99 220121 79 369.4 9
Latency 24036us 460ms 307ms 34597us 48255us 108ms
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
istral 16 6577 79 +++++ +++ 6656 63 6942 80 +++++ +++ 2755 33
Latency 24160us 110us 39234us 18515us 89us 58394us
Name:marvin
OS:Linux 2.6.12 (Ubuntu 5.10 default kernel)
Bonnie++ Ver:1.03
Hardware:Celeron 2.4GHz, 512MB Ram, Gigabyte GA-8IG1000MK
Disk System:4xSeagate 300GB SATA Software RAID 5 - 64K stripe, SIS3114 4 port PCI controller
Filesystem tested:ext3
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
marvin 2G 30142 83 48512 11 26166 8 32815 90 87945 16 279.7 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
marvin 16 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++
Name: ansset
OS: Fedora Core 4, Kernel: 2.6.14-1.1644_FC4
Bonnie++ Ver: 1.03
Hardware: athlon 900Mhz, 885 MB RAM, (lspci: Promise Technology, PDC20265 (FastTrak100 Lite/Ultra100) (rev 02))
Disk System: Seagate ST3160023A, 160 GB ATA100 (hdparm: udma5, MaxMultSect=16)
Filesystem tested: ext3
Bonnie commandline: bonnie++ -r 1024 -s 2048 -x 1
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
ansset 2G 14214 94 45631 56 16564 16 15221 85 53487 26 152.6 1
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
ansset 16 625 99 +++++ +++ 22796 94 751 98 +++++ +++ 1956 98
Name: pi
OS: Gentoo linux (64 bit), Kernel: 2.6.17-rc1-git7
Bonnie++ ver: 1.93c
Hardware: AMD64 X2 4400+, 2G ram (NForce4 sata and Sil31XX)
Disk System: 5* WDC SATA w/ 16 mb cache
Filesystem: xfs
Bonnie commandline: bonnie++ -r 2g -s 4g -x 1
Results:
Version 1.93c ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
pi 4G 517 98 118033 33 26770 9 849 92 189139 43 340.4 8
Latency 18087us 256ms 207ms 266ms 120ms 731ms
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
pi.pomac.com 16 1280 8 +++++ +++ 1601 10 1154 7 +++++ +++ 699 4
Latency 237ms 210us 160ms 172ms 260us 187ms
Name: mystery
OS: Ubuntu Dapper Flight 5, Kernel: 2.6.157
Bonnie++ ver: 1.03
Hardware: Pentium 4 2.4GHz, 1GB RAM, Areca 1120 PCI-X RAID controller
Disk System: 8 * Seagate SATA 300GB w/16 mb cache
Filesystem: ext3
Bonnie commandline: bonnie++ -r 1024 -s 2048 -x 1
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
mystery 2G 44524 94 140249 28 49851 9 44394 84 152417 11 386.3 0
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
mystery 16 3051 99 +++++ +++ +++++ +++ 3114 99 +++++ +++ 12550 100
Name: IBM
OS: Ubuntu 6.06, Kernel: 2.6.15-27-686 (SMP)
Bonnie++ ver: 1.03
Hardware: Dual P-3-733MHz, 1.2GB RAM, Intel SRCS14L 64MB PCI-X 4-Port SATA-1 RAID Controller; Cache = Enabled; Write Cache = Enabled
Disk System: 2 * Seagate SATA 320GB w/16 MB Cache (RAID-1)
Filesystem: ext3?
Bonnie commandline: bonnie++ -r 1200 -s 2400 -x 1
Results:
Version 1.03 ------Sequential Output------ --Sequential Input- --Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP
ibm 2400M 9718 90 25065 37 11368 14 11618 86 52363 37 203.9 2
------Sequential Create------ --------Random Create--------
-Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
files:max:min /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
ibm 16 486 95 +++++ +++ 24737 93 489 96 +++++ +++ 1695 96
Part of CategoryDiskNotes
No page links to HarddiskBenchmarks.
