Differences between version 417 and predecessor to the previous major change of GarageSale.
Other diffs: Previous Revision, Previous Author, or view the Annotated Edit History
| Newer page: | version 417 | Last edited on Saturday, September 13, 2008 3:02:18 pm | by DavidGoodwin | Revert |
| Older page: | version 415 | Last edited on Saturday, January 26, 2008 6:47:05 pm | by CraigFalconer | Revert |
@@ -5,8 +5,12 @@
* ''Can people *please* not indent what they say in here? it causes the page to extend into oblivion. Prefix what you want to say with two *'s instead.''
----
!!!Wanted to Buy/Swap
+
+DavidGoodwin [mailto:dgsoftnz@gmail.com]
+* Stuff to use with OpenVMS (VAX/Alpha stuff, manuals, media). May 2008
+* a PCI/SCSI riser board for a digital Multia (so i can connect a cdrom drive to install an OS)
CraigFalconer (in [Christchurch]) [mail form|http://criggie.dyndns.org/index-email.shtml]
* One Slot 1 P3 933 MHz and suitable VRM for a compaq DL380 server.
* Working Toshiba Libretto laptop, any spec
@@ -24,13 +28,8 @@
* Cheap PalmOS device. I don't care about age and i just want it for a screen, so faulty digitizer or buttons is fine.
SamThigpen [mailto:sam_thigpen@yahoo.com]
* WTB: ~P3 IBM Thinkpad or similar laptop, no hard drive, no memory, good monitor
-
-DavidGoodwin [mailto:dgsoftnz@gmail.com]
-* Digital Alpha of some form
-* a PCI/SCSI riser board for a digital Multia (so i can connect a cdrom drive to install an OS)
-* Any Digital or SUN machines, RISC workstations.
PhilMurray [mailto:pmurray@nevada.net.nz]
* Wanted - 4U or under, P100 or above 19" Rack mount machine or some kind of Sparc/Alpha that supports PCI
* Or! A Cisco 2511 Access server
@@ -53,8 +52,15 @@
* ECC / EDO / FP SIMMs totalling more than 16mb ;). 72 or 30 pin will do, this board will take either.
* 286/386 mainboard w/cpu. I want one that makes the click noises as it counts through the memory test.
!!!For sale/give-aways
+
+DavidGoodwin [mailto:dgsoftnz@gmail.com] (All free for who ever wants it) - September 2008
+* 12 (+3 with no PSU) Compaq Prolinea 575e computers. 75MHz pentium, 8MB onboard RAM, 630MB IDE hard disk, D-Link DE220E (NE2000 compatible I think) 10base2/10baseT ethernet, integrated video/serial/parallel/2 IDE channels/etc.
+* Apple LaserWriter IInt. Seems to power on fine. No paper tray so untested.
+* HP DeskWriter Apple Inkjet printer. No PSU, needs new ink cartridge, unknown condition.
+* HP DeskJet 400 Inkjet printer. Unknown condition.
+* 2x ATX desktop cases. 3x 5.25" drive bays (2 accessable, 1 for 3.5" HDD only), 2x 3.5" drive bays, 200W PSU. Originally housed Pentium 166MHz hardware.
CraigFalconer (in [Christchurch]) [mail form|http://criggie.dyndns.org/index-email.shtml]
* new unused USB Cup warmer and stainless steel cup with lid
* Celeron 1700 desktop, 256 MB ram, 40 GB IDE, SIS on-board video, CD. BCL tower case. Works fine
