The DECserver was a highly successful family of asynchronous Terminal Servers made by DEC (Digital Equipment Corporation). The DECserver can be used with Linux with the help of the Linux-DECnet project and a few other things. On this page are some notes on setting up the DECserver 100 to run with Linux.
Local -901- Initializing DECserver "08-00-2B-04-8B-A7" -- ROM BL8A, H/W Rev B.B Local -902- Waiting for image load Local -903- Loading from host "08-00-20-8E-16-0B" Local -904- Image load complete
This means that everything should be working. You should be able to press enter now to get the DECserver login prompt. For this Hyperterminal (included with windows) does not seem to work. PuTTY and Tera Term Pro are good free options under windows.
For more advanced configuration and use, see the LAT page on the DECnet for Linux website: http://linux-decnet.sourceforge.net/lat.html
Local -911- WARNING -- Non-fatal Hardware error detected Server code 1000, terminal codes 00 00 00 00 00 00 00 00
after "Initializing DECserver..." then you have an Ethernet 1.0 transceiver - the DECserver 100 is designed to work with Ethernet 2.0 transceivers. See section 184.108.40.206 of the DECserver 100 Terminal Server Operations Guide (AA-Z085A-TK, January 1985) for more information.
Local -902- Waiting for image load Local -912- Load failure, timeout
then check that the filename of the image is "PS0801ENG.SYS" and is in the directory /tftpboot/mop - if it is not then this is probably your problem. Otherwise check that mopd and latd are running and your network link is functional. You could also try setting the DECserver 100 to the factory default settings.
To set to factory default settings hold down the S1 button while unplugging and plugging in the power cable. This should reset all settings to factory defaults including the image name and privileged password (to SYSTEM).
lib/main.php:944: Notice: PageInfo: Cannot find action page